Dinan

D290-0303-BD

Dinan by Brembo Rear Brakes – Black Calipers With Drilled Rotors for vehicles with standard brakes

Product Description

Special Note: For RWD & xDrive vehicles with Standard brakes. Must be used in conjunction with Dinan/Brembo front brakes. Must modify backing plates

 

Extensive testing on the street and at the track has enabled us to develop custom systems that have been tuned for optimum performance while avoiding the foibles of typical ”big brake kits”, such as unbalanced proportioning, poor pedal feel and unacceptable noise levels, just to name a few.

 

The Dinan/Brembo slotted front brakes offer the ultimate in stopping power for the most demanding driving enthusiast. The brake calipers are available in either red or black, giving you the choice of a stealth or competition look.

Dinan’s custom brake pads and kits have been specially designed for use with the BMW brake wear sensors to keep the safety system fully functional, something that is lost in competitors kits.

Note:
In most cases, the large rotors and calipers will require the use of aftermarket wheels for adequate brake clearance. Most of Dinan’s lightweight performance wheels are recommended, providing proper clearance and the ability to fit the largest tires possible for optimum performance. Be sure to check with the manufacturer or distributor of the wheels you are considering in order to verify that they offer the necessary clearance, citing the Brembo ”Gran Turismo” brakes as a reference.

Benefits:
+ Large 345mm Rotors with Aluminum Hats 
+ Massive Stopping Power 4-Piston Mono-Block Aluminum Calipers
(Available in Black or Red)
+ Goodridge DOT/TUV Approved Stainless Steel Brake Lines Included
+ All Mounting Brackets and Assembly Hardware Included
+ Dinan-spec Brake Pads with Sensor Provision Included
+ More Stopping Power
+ Less Brake Fade During Heavy Use
+ Works With BMW Brake Wear Sensors
+ High Quality Finish With DINAN Logo
+ Looks Great Especially With Larger Wheels

Models supported by D290-0303-BD
  • 2011 BMW 335xi Coupe
  • 2013 BMW 328i Wagon
Product Specifications
Labor Hours/Installation Hours 4.80
Included Notes 345mm X 28mm Rotors with Aluminum Hats (Stock standard Rotors Measure 330mm X 20mm)
6-Piston Aluminum Calipers Available in Black or Red (Stock Calipers 1-Piston)
Goodridge DOT/TUV Approved Stainless Steel Brake Lines
Mounting Brackets and Assembly Hardware
Dinan-spec Ferodo Brake Pads with wear sensor cutout
Labor time includes bleeding of brakes.
Required Items 18" or larger wheels

 

 

Subscribe