Dinan Carbon Fiber Cold Air Intake for BMW 135i E82 E88 BMW 335i E92 E93


SKU: D760-0030

All orders will include an AutoTalent window decal



The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat.It is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet.

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change.

Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust. Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque Stage 1 software, Free Flow Exhaust  produces 9 Hp and 10 ft-lb torque Completely Stock car produces 5 Hp and 6 ft-lb torque Dinan Performance Software is highly recommended.

Special Note: Dinan Performance Software is highly recommended.
Not compatible with M aerodynamic bumper.


Not legal for sale or use in California. 

  • 2008-2010 BMW 135i E82 Coupe 
  • 2008-2010 BMW 135i E88 Convertible 
  • 2007-2010 BMW 335i E93 Convertible 
  • 2007-2010 BMW 335i & xDrive E92 Coupe 
  • 2008-2010 BMW 135i Convertible
  • 2008-2010 BMW 135i Coupe
  • 2007-2013 BMW 335i Convertible
  • 2007-2010 BMW 335i Coupe
  • 2007-2008 BMW 335i Sedan
  • 2007-2010 BMW 335xi Coupe
  • 2007-2008 BMW 335xi Sedan
Product Specifications:
Labor Hours/Installation Hours 2.00
Emission Status This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles , which may never be used upon the highway.
Max HP Gain 14 hp @ 6000 rpm*
Max Torque Gain 16 ft-lbs @ 3400 rpm*
Included Notes Carbon fiber lid, Carbon Fiber air intake tube, rubber hose coupler, Panel air filter for the airbox, Conical air filter for the secondary intake, shielding for the conical filter, Mounting brackets & hardware.