Dinan

D160-0005

Dinan Negative Camber Control Arms for BMW M5

Special Note: Alignment is recommended after installation.
Product Description

Negative Camber Control Arms provide a reduction of understeer and more immediate turn-in from the M5 by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways.

The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.

Benefits:

+ Replaces front upper control arms with ones that increase negative camber by -0.3°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering

 

Models Supported by Dinan Negative Camber Control Arms for BMW M5

  • 2012-2016 M5 F10 Sedan 

DOWNLOAD INSTALLATION INSTRUCTION HERE

Product Specifications
Labor Hours/Installation Hours 2.30
Required Items Review BMW procedure for additional hardware that must be replaced during installation (not included).

Subscribe