Dinan

D160-0005

Dinan Negative Camber Control Arms for BMW M6

Special Note: Alignment is recommended after installation.
Product Description

Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in from the M6 by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively.

This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.

Benefits:

+ Replaces front upper control arms with ones that increase negative camber by -0.6°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering

Models Supported by Dinan Negative Camber Control Arms 

  • 2012-2018  M6 F12 Convertible 
  • 2012-2017 M6 F13 Coupe 

DOWNLOAD INSTALLATION INSTRUCTION HERE

Product Specifications
Labor Hours/Installation Hours 2.30
Required Items Review BMW procedure for additional hardware that must be replaced during installation (not included).

Subscribe