Dinan

D100-0905

Dinan Performance Spring set for BMW F01 B7

Special Note: Not for F02 Alpina B7L. Only F01 vehicles with the standard suspension and not the optional air suspension. Refer to D100-0916 for compatible springs with the air suspension.
Installation labor time varies based on drivetrain. 9.2 hrs for RWD and 11.4 for xDrive
Product Description

Dinan's Performance Spring set for the F01 Alpina B7 provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 1/2" in front and 1/2" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle. 

NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.

 Benefits of the Dinan Performance Spring Set for the F01 Alpina B7:

+ Decreased body roll from higher spring rates
+ Lowers the vehicle 3/4" in front and 1/2" in the rear on a xDrive vehicle and 1/2" all around on a RWD vehicle
+ Preset to prevent spring sag
+ Compatible with factory electronic shocks

Models Supported by Dinan Performance Spring Set for the F01 Alpina B7:

  • 2011-2012 Alpina B7 & L, X F01/F02 
  •  2013-2015  Alpina B7 & L, X F01/F02

Corresponding Ride Quality and Handling Kit highly recommended.
Refer to description for details.

Product Specifications
Labor Hours/Installation Hours 11.40
Included Notes 2 front springs, 2 rear springs
Required Items Highly Recommended: D193-0101 - Supplemental Ride Quality & Handling Kit for BMW F01 Alpina B7 or D193-0121 - Supplemental Ride Quality & Handling Kit for BMW F01 Alpina B7 xDrive (see product description for details).

Subscribe