Dinan's Performance Spring set for the F13 650i provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 1/2" in front and 1/2" in the rear for improved suspension geometry and an even more aggressive stance.
The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel.
NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.
Benefits of the Dinan Performance Spring Set for the F13 650i:
+ Decreased body roll from higher spring rates
+ Lowers the vehicle 1/2" in front and 1/2" in the rear
+ Spring rate is 30% stiffer in the front and rear
+ Preset to prevent spring sag
+ Compatible with both conventional and factory electronic shocks
Models Supported by Dinan Performance Spring Set for the F13 650i
- 2012 650i & xDrive F13
- 2013-2018 650i & xDrive F13 Coupe
Corresponding Ride Quality and Handling Kit highly recommended.
Refer to description for details.
|Labor Hours/Installation Hours
||2 front springs, 2 rear springs
Highly Recommended: D193-1311 - Supplemental Ride Quality & Handling Kit for BMW F13 650i xDrive or D193-1301 - Supplemental Ride Quality & Handling Kit for BMW F13 650i (see product description for details).