Special Note: For 2011 and 2012 model years only. For B7, B7L, B7X and B7LX. See required products.
Propelling it up that notch is the Dinan Stage 1 Performance Engine Software. As always, Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles, including the possibility of consequential damages. No one offers better performance or backs it up with such comprehensive warranty coverage.
The Dinan Performance Engine Software safely increases turbo-boost pressure from the stock 14.0 to 18.0 psi, along with properly retuned fuel mixtures, ignition timing and full map rescaling. In fact, over 2000 lines of code have been addressed, producing substantial increases in power output while maintaining the civility and reliability expected of a Dinan performance product.
Note: When ordering please ensure you have your VIN ready for the checkout process. It is crucial that it is typed in accurately and completely at that time.
While we offer the DIY kits in the stage 1 form, the additional stages will need to be purchased and installed at an authorized dealer as they require hard parts to function properly.
Note: When programmed, the pressure sensors in both intercoolers must be replaced with 2x BMW #13 62 7 585 494. Refer to TIS procedures 1362591 and 1362592. These sensors are not included with the software, and must be purchased separately from your BMW dealer.
DOWNLOAD INSTALLATION INSTRUCTION HERE
Not legal for sale or use in California.
- 2011-2012 Alpina B7 & L, X F01/F02
|Labor Hours/Installation Hours
||This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon a highway.
|Max HP Gain
|Max Torque Gain
||134 @ 3500 RPM
||573 @ 5500 RPM
||644 @ 3500 RPM
|Peak HP Gain
||73 @ 5500 RPM
|Peak Torque Gain
||128 @ 3500 RPM
|Factory Rated HP
||500 @ 5500 RPM
|Factory Rated Torque
||516 @ 3500 RPM
||OBD2 to Ethernet Adapter and Ethernet to USB Adapter.
||Windows 7 or newer Laptop with a USB connector and an internet connection.
Note: When the car is programmed, the pressure sensors in both intercoolers must be replaced with 2x BMW #13 62 7 585 494. Refer to TIS procedures 1362591 and 1362592. These sensors are not included with the software, and must be purchased separately from your BMW dealer or directly from DINAN at a discount.
Cars produced 3/12 and later will also require new sensor connector housings, 2x BMW #12 52 7 513 331. These connectors are not included with the software, and must be purchased separately from your BMW dealer.