Aero

Vorsteiner made the G8X M4 Carbon Fiber Rear Diffuser for the BMW G82 M4. It replaces or extends the lower rear valance with carbon channels that help pull air out from under the car. The diffuser fills in the lower rear of the car,...

Vorsteiner made the V-CSL Center Console for the BMW E46 M3. It swaps the factory center console trim for a carbon piece. Inside, it adds the same carbon look as the exterior aero. The part belongs to the V-CSL program Vorsteiner developed for the...

Vorsteiner made the GTS-V G8X M3 / M4 One-Piece Carbon Fiber Aero Front Bumper for the BMW G80 M3 / G82 M4. It is a full replacement bumper that changes the car's whole front or rear look. Unlike a lip or add-on, this GTS-V...

Vorsteiner made the E46 M3 V20 Aero 1 Piece Splitter for the BMW E46 M3. It adds a sharper leading edge to the front bumper and helps manage the air that would otherwise build up under the nose. Up front is where most aero...

Vorsteiner made the E46 M3 V20 Aero Rear Diffuser for the BMW E46 M3. It gives the rear end a race-style finish and organizes the air leaving the underbody. The diffuser fills in the lower rear of the car, which is where factory bumpers...

Vorsteiner made the E46 M3 V20 Aero Limited Side Grilles Nickel Plated for the BMW E46 M3. It replaces the factory grille with a carbon or finished piece that changes the face of the car. The grille defines the face of the car, so...

Vorsteiner made the Carbon Fiber V20 Aero Hood for E46 M3 for the BMW E46 M3. It takes weight off the nose and gives the front end a distinct carbon look. A carbon hood is a big visual change on the car, and it...

Vorsteiner made the E46 M3 V20 Aero Front Bumper With 2-Piece Splitter for the BMW E46 M3. It adds a sharper leading edge to the front bumper and helps manage the air that would otherwise build up under the nose. Up front is where...

Vorsteiner made the E46 M3 V20 Collector Edition Package - Full V20 Aero Collection & Limited Side Grilles for the BMW E46 M3. It replaces the factory grille with a carbon or finished piece that changes the face of the car. The grille defines...

Vorsteiner made the E46 M3 V-CSL 2-Piece Aero Front Bumper Splitters for the BMW E46 M3. It extends the front fascia with a low carbon blade that cleans up airflow at the front of the car. Up front is where most aero changes start,...

Vorsteiner made the Huracan Sterrato VRS Aero Fender Flares for the Lamborghini Huracan Sterrato. These parts give the car a wider, more aggressive look and let air out of the wheel arches. Fenders change the car's stance more than any other part, especially with...

Vorsteiner made the Huracan Sterrato VRS Aero Fog Light Covers for the Lamborghini Huracan Sterrato. It adds a matching carbon detail to the factory body. It is a finishing piece that ties into the rest of the Vorsteiner aero. The part belongs to the...

Vorsteiner made the Huracan EVO Monza Edizione Side Blades for the Lamborghini Huracan EVO. These parts fill the space between the front and rear wheels with carbon blades that tie the front and rear aero together. Side pieces link the front and rear aero,...

Vorsteiner made the 991.1 911 GT3RS Wing Blade for the Porsche 911 GT3 RS (991.1). It adds rear downforce and a motorsport profile on the back of the car. Wing parts carry real load at speed, so fit and mounting matter as much as...

Vorsteiner made the 991.1 911 GT3RS Aero Dive Planes for the Porsche 911 GT3 RS (991.1). These parts mount to the corners of the front bumper and split the air around the front wheels. Canards are small, but they make the front corners look...

Vorsteiner made the 991.1 911 GT3RS Air Outlets (991.1 Only) for the Porsche 911 GT3 RS (991.1). These parts add carbon trim to the factory openings and help direct air where the car needs it. These are an easy way to add carbon in...

Vorsteiner made the 991.1 911 GT3RS Wing Blade with End Caps for the Porsche 911 GT3 RS (991.1). It adds a matching carbon detail to the factory body. It is a finishing piece that ties into the rest of the Vorsteiner aero. Features Made...

Vorsteiner made the 991.1 911 GT3RS Wing End Caps for the Porsche 911 GT3 RS (991.1). It adds a matching carbon detail to the factory body. End caps close off the tips of the GT3 RS wing blade; these carbon caps replace the factory...

Vorsteiner made the 991.1 911 GT3RS Front Apron for the Porsche 911 GT3 RS (991.1). It adds a sharper leading edge to the front bumper and helps manage the air that would otherwise build up under the nose. A front spoiler is one of...

Vorsteiner made the 991.1 911 GT3RS Gurney Flap for the Porsche 911 GT3 RS (991.1). It puts real downforce over the rear axle and gives the car a track-ready silhouette. Wing parts carry real load at speed, so fit and mounting matter as much...

Vorsteiner made the JL-JX Edition Aero Carbon Fiber Rear Fenders for the Jeep Wrangler JL. These parts replace or extend the factory fenders with carbon panels that change the stance and help vent the wheel wells. Fenders change the car's stance more than any...

Vorsteiner made the 991.2 GT2RS Extended Wing Risers for the Porsche 911 GT2 RS (991.2) / Porsche 911 GT3 RS (991.1). It puts real downforce over the rear axle and gives the car a track-ready silhouette. A wing is the most obvious aero statement...

Vorsteiner made the Taycan Turbo/Turbo S GW9 Front Spoiler for the Porsche Taycan Turbo / Turbo S. It extends the front fascia with a low carbon blade that cleans up airflow at the front of the car. A front spoiler is one of the...

Vorsteiner made the Taycan Turbo/Turbo S GW9 Rear Diffuser for the Porsche Taycan Turbo / Turbo S. It fills the lower rear bumper with carbon strakes that help the underbody air exit cleanly. Out back, a diffuser changes the look of the car more...

Vorsteiner made the Taycan Turbo/Turbo S Decklid Spoiler for the Porsche Taycan Turbo / Turbo S. It adds a carbon lip at the trailing edge of the rear deck for a cleaner rear profile and a small amount of rear lift reduction. Spoilers like...

Vorsteiner made the Model 3 Complete Volta Carbon Program for the Tesla Model 3. It brings the matching Vorsteiner aero pieces for this car together in one order. A complete program is the easiest way to get the whole Vorsteiner look in one go....

Vorsteiner made the Model Y Full Aero Program for the Tesla Model Y. It brings the matching Vorsteiner aero pieces for this car together in one order. A complete program is the easiest way to get the whole Vorsteiner look in one go. Features...

Vorsteiner made the Revuelto Carbon Fiber Aero Rear Diffuser for the Lamborghini Revuelto. It gives the rear end a race-style finish and organizes the air leaving the underbody. The diffuser fills in the lower rear of the car, which is where factory bumpers often...

Vorsteiner made the Revuelto Carbon Fiber Aero Side Skirts for the Lamborghini Revuelto. These parts fill the space between the front and rear wheels with carbon blades that tie the front and rear aero together. From the side, skirts are what make the car...

Vorsteiner made the Revuelto Carbon Fiber Aero Vented Front Fenders for the Lamborghini Revuelto. These parts give the car a wider, more aggressive look and let air out of the wheel arches. Vented fenders also let hot air and pressure out of the wheel...