CONCERNS ABOUT FITMENT?

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and...

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin...

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and...

This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. The...

This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features a 5-1/2” flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering...

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in...

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use...

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest...

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils....

Large Five Layer Performance Air Filter: Momentum's innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2 IN tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer...

Large Three Layer Performance Air Filter: Momentum's unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2 IN tall 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic...

This aFe POWER Pro 5R is a 7-1/2” tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest...

This aFe POWER Pro DRY S filter is 7-1/2” tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils....

This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque....

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque....

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This...

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides...

This Takeda "muffler-delete" axle-back exhaust system eliminates the OE restrictive muffler and delivers a deepened exhaust tone while increasing performance. Oversize Mandrel-Bent Stainless Steel Tubing for Maximum Flow Reduces Substancial Weight Over Factory System 100% MIG Welded for Strength and Durability Delivers an Aggressive...

aFe is proud to introduce an all new Takeda dual cat-back exhaust system for the 2015-2020 Subaru WRX and WRX STI with the H4-2.0L/2.5L (t) engines. This performance cat-back exhaust system is constructed out of 3" into dual 2-1/4" mandrel-bent 304 stainless steel tubing...

This Takeda dual cat-back exhaust system for the 2015 - 2020 Subaru WRX and WRX STI delivers true bolt-on performance with gains up to +14 horsepower and +22 lbs. x ft. of torque as measured on our in-house dyno. 3" into 2-1/4" mandrel-bent 304...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing...

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

Twisted Steel Long Tube Header 304 Stainless Steel Subaru Impreza WRX/STi/Legacy 02-21 H4-2.0L (t)/2.5L (t) Constructed from 1-5/8" - 2-1/2" Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing Works with Factory Exhaust System with No Modifications Necessary Optimized Tube Lengths for Improve Flow and Performance...

Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque.Perfect Fit: This tube kit features a CNC machined turbo adapter flange, stainless-steel T-bolt clamps, and heavy-duty 5-ply polyester reinforced silicone couplings for superior strength...