Skip to content

Milltek Exhaust FL5: Every Civic Type R Cat-Back Option Explained

by AutoTalent 28 Oct 2026 0 Comments

Quick answer: Milltek builds four cat-back families for the FL5 Civic Type R. You choose a sound level, either Road+ (part-resonated, keeps a centre silencer) or Non-Resonated (louder, replaces it). Then you choose whether to keep the factory exhaust valve (valved) or delete it (non-valved). All of them use 3.00" (76.2mm) T304L stainless pipework and a triple-tip rear, and Milltek estimates the fit at 1 to 1.5 hours. For a daily-driven FL5, the Road+ valved system is the safe pick. For the loudest sound, go Non-Resonated, and add Milltek's valve remote if you want to open and close the valve on demand.

Milltek is one of the most popular exhaust choices for the 11th-gen Type R, but the options get confusing quickly, with five tip finishes, OE-style trims and a separate remote. This guide covers every FL5 Milltek Sport cat-back AutoTalent sells, what's in each box, prices at the time of writing and how to pick one.

White Honda Civic Type R FL5 rear view with a triple-tip cat-back exhaust, parked on wet pavement at dusk

Milltek FL5 Cat-Back Options at a Glance

System Sound Factory valve Price at time of writing
Road+ (Part Resonated), Valved Refined at cruise, louder with the valve open Kept (valved outlet pipe) $2,542 to $3,205
Road+ (Part Resonated), Non-Valved Sporty, fixed volume Deleted (valve delete module + bypass pipe) $2,132 to $2,795
Non-Resonated, Valved Loudest, quieter with the valve closed Kept (valved outlet pipe) $2,310 to $2,973
Non-Resonated, Non-Valved Loudest, fixed volume Deleted (valve delete module + bypass pipe) $1,900 to $2,563

The price changes with the tip finish (Polished, Cerakote Black, Brushed Titanium, Burnt Titanium or Carbon). The valved systems are also offered with OE-style tips, one 4.5" centre plus two 4" outers, in carbon or titanium. All prices come from the Milltek FL5 cat-back exhaust page at the time of writing, without the optional remote.

Road+ vs Non-Resonated on the FL5

The difference shows in the parts list. Every FL5 system replaces the front silencer with a straight pipe. The Road+ systems keep a Milltek centre silencer. The Non-Resonated systems swap that for a centre silencer replacement pipe. Both end in a Milltek twin rear silencer with a heat shield.

  • Road+: the extra silencer takes the edge off highway cruising, so it suits a car you commute in.
  • Non-Resonated: fewer silencers make it the rawest, loudest FL5 Milltek. It's best for weekend and track cars, or for owners who will use the valve to quiet it down.

For a deeper look at how resonators change sound and drone across Milltek's range, see Milltek resonated vs non-resonated.

Valved vs Non-Valved: Keep the FL5's Factory Valve?

The FL5 leaves the factory with an exhaust valve, and Milltek gives you two ways to handle it:

  • Valved: includes a Milltek valved outlet pipe that works with the car's own valve control. The car can still run quieter in calmer drive modes and open up when you push it.
  • Non-valved: includes a valve delete module and a valve bypass pipe. The exhaust stays at one volume all the time, and it's the cheapest way into each sound level.

If you're unsure, go valved. It gives you the widest sound range from a single exhaust and leaves room to add the remote later.

The Milltek Valve Remote (Active Valve Control)

Milltek's Active Valve Control (part SSXHO293) is a plug-and-play remote that lets you open or close the valve yourself, regardless of drive mode. Milltek says it works with both Milltek and OE valved exhausts. It's an option on the same product page and adds $514 to the system price at the time of writing. It suits valved owners who want a quiet cold start or a fully open exhaust without changing drive modes.

What's in the Box

Stainless steel triple-exit cat-back exhaust with burnt titanium tips and a valve actuator laid out on a dark floor

Component Road+ Valved Road+ Non-Valved Non-Res Valved Non-Res Non-Valved
Front connecting pipe with flex Yes Yes Yes Yes
Front silencer replacement pipe Yes Yes Yes Yes
Centre silencer Silencer Silencer Replacement pipe Replacement pipe
Rear connecting pipe + twin rear silencer + heat shield Yes Yes Yes Yes
Valved outlet pipe Yes No Yes No
Valve delete module + bypass pipe No Yes No Yes
Tips Three 4.5" GT-115 or JET-115 tips, or OE-style (1 x 4.5" + 2 x 4") on valved systems

Fitment: Which Civic Type R Does It Fit?

These systems fit the 11th-generation FL5 Civic Type R with the 2.0L turbo engine. Milltek lists it as 2022+, which is the global launch year. In the US, the FL5 went on sale as a 2023 model year, so every US FL5 from 2023 on is covered. They don't fit the previous FK8 Type R (2017 to 2021) or the regular Civic and Civic Si. Milltek's ECE-approved resonated version is built for European type approval, so US buyers should choose Road+ or Non-Resonated.

Pairing a Milltek Downpipe

Milltek also makes FL5 downpipes. A catless large-bore pipe costs $498, and catted versions run from $1,123 to $3,628 at the time of writing (see Milltek FL5 downpipes). Milltek marks every FL5 downpipe as race/track only. Catless pipes replace emissions equipment and are sold for off-road and competition use where the law allows. A downpipe also makes any cat-back louder, which is one more reason to choose Road+ if you plan to add both. Our guide to what a downpipe does explains the trade-offs.

Which Milltek FL5 Exhaust Should You Buy?

If you... Choose
Daily drive and want no highway drone Road+ Valved
Want more sound on a budget and don't need the valve Road+ Non-Valved
Want the loudest system but a quiet mode too Non-Resonated Valved + valve remote
Build a weekend or track car Non-Resonated Non-Valved
Want a factory look Any valved system with OE-style tips

For the rest of the build (intake, tune, brakes and wheels, in order), see our FL5 mods guide.

FAQ

Is the Milltek FL5 exhaust valved?

You choose. The valved systems keep the factory valve working, while the non-valved systems delete it with a valve delete module and bypass pipe.

What's the difference between Milltek Road+ and non-resonated on the FL5?

Road+ keeps a Milltek centre silencer, so it's quieter and calmer at cruise. Non-Resonated replaces that silencer with a straight pipe, making it Milltek's loudest FL5 option.

How much does a Milltek exhaust for the FL5 cost?

At the time of writing, AutoTalent prices FL5 Milltek cat-backs from $1,900 (Non-Resonated, non-valved, polished tips) to $3,205 (Road+ valved, Burnt Titanium tips), before the optional $514 valve remote.

Does the Milltek FL5 exhaust fit the FK8 Civic Type R?

No. These systems are for the FL5 only. The FK8 (2017 to 2021) needs its own FK8-specific system.

How long does it take to install?

Milltek estimates 1 to 1.5 hours for a professional installer.

Do I need a tune for a Milltek FL5 cat-back?

No. A cat-back bolts on in place of the factory exhaust and doesn't require a tune. A downpipe is a separate step and should be paired with a matching tune.

Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Login Close
Close
Shopping Cart
1 items

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Close
Edit Option
Close
Back In Stock Notification
this is just a warning