CONCERNS ABOUT FITMENT?

Raw, rowdy, and lightweight. The AWE Track Edition Axle Back is the perfect dose of steel for drivers looking for the loudest of the lot. Retaining the 3” diameter T304L stainless steel construction, the Track Edition Axle Back mirrors all of the precision engineering...

If raw and rowdy are your speed, the Track Edition Axle Back is your dose of steel. The AWE Track Edition Exhaust in Axle Back form provides the most cost-effective aggression in the lineup by retaining the M5’s factory mid-section and replacing the rear...

The AWE Track Edition Exhaust in axle-back form provides the most cost-effective aggression in the lineup by retaining the SS’ factory mid-section and replacing the rear sections with Track Edition straight pipes. Please note: This version is known to get rowdy (like, really rowdy),...

Beginning after the secondary catalyst, the AWE Track Edition picks up right before the rear axle and provides a full single 3” route from this point, then splits to dual 3” tip outlets. The Track Edition has absolutely zero filter -- making its sole...

If raw and rowdy are your speed, the Track Edition is your dose of steel. The AWE Track Edition Axle Back Exhaust retains all the engineering and precision of the Touring Edition Exhaust, minus the 180 Technology®. The result? Completely raw wake-the-dead level muscle....

If raw and rowdy are your speed, the Track Edition is your dose of steel. The loudest of the lot, the Track Edition Axle-back retains all the engineering and precision of the Touring Edition, including the 3” diameter tubing, minus the 180 Technology®. The...

If raw and rowdy are your speed, the Track Edition is your dose of steel. The AWE Track Edition Axle Back Exhaust retains all the engineering and precision of the Touring Edition Exhaust, minus the 180 Technology®. The result? Completely raw wake-the-dead level muscle....

If raw and rowdy are your speed, the Track Edition is your dose of steel. The loudest of the lot, the Track Edition Axle-back retains all the engineering and precision of the Touring Edition, including the 3” diameter tubing, minus the 180 Technology®. The...

This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2" diameter 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda...

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response....

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

aFe is proud to introduce the Takeda Dual Cat-Back Exhaust System. This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno. The exhaust system is constructed from 2-1/2" mandrel bent...

aFe is proud to introduce the Takeda Axle-Back Exhaust System for the 2008-2014 Scion xB with the L4-2.4L engine. In recent testing, this system resulted in a max gain of 7 horsepower and 8 lbs. x ft. of torque. This unique over-axle system incorporates...

Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

Testing In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing...

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and...

This axle-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a mild sound. The muffler has a polished finish for ultimate...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. Due to the state-of-the-art computer-aided technology utilized to design...

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position...

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This down-pipe...

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated black finish and a stamped aFe power logo. Exhaust Valve: This down-pipe...

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded....

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded....

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and provides a hassel-free install. Utilizes Factory Style Bayonet Hangers for a Secure Fit...

The simple swap of the rear section of your factory exhaust to the MACH Force Xp muffler delete system brings performance gains, a custom look, and a smooth sound. Constructed from 3" to 2-1/2" Mandrel-Bent Stainless Steel Tubing All Necessary Hardware is Included for...

aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Coronoa California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and...