exhaust

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for 2011-2014 Ford F150 EcoBoost with V6-3.5L (tt) engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a...

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2" with aFe power...

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a...

Unique sound and style is what this Rebel Series cat-back exhaust system delivers. 2 1/2" mandrel bent, 304 stainless steel tubing is 100% hand MIG-welded for race proven strength and durability. A high flow stainless steel, muffler delivers a powerful exhaust tone. The system...

Unique sound and style is what this Rebel Series cat-back exhaust system delivers. 2 1/2" mandrel bent, 304 stainless steel tubing is 100% hand MIG-welded for race proven strength and durability. A high flow stainless steel, muffler delivers a powerful exhaust tone. The system...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This system produced gains of up to +13 HP and +12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces a powerful sound unleashing all available horsepower and torque. Optional tips are available. Utilizing a factory style flange and hangers this system...

This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. Optional tips are available. This system produces a powerful sound unleashing all available...

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow...

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow...

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow...

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

This system produced gains of up to +6.45 HP and +8.12 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system...

Replace the rear section of your factory exhaust system with Takeda's free-flowing axle-back exhaust system. Exiting with dual stainless steel tips, it not only sounds better than OE, but looks better too. Constructed from 2-1/2" - 2-1/4" Mandrel-Bent Stainless Steel Tubing All Necessary Hardware...

Replace the rear section of your factory exhaust system with Takeda's free-flowing axle-back exhaust system. Exiting with dual stainless steel tips, it not only sounds better than OE, but looks better too. Constructed from 2-1/2" - 2-1/4" Mandrel-Bent Stainless Steel Tubing All Necessary Hardware...

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This...

2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Dual 4-1/2" Diameter Polished Exhaust Tips: Finishing off this exhaust system are dual 4-1/2" diameter polished 304 stainless steel clamp-on exhaust tips.Installation:...

2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Dual 4-1/2" Diameter Blue Flame Exhaust Tips: Finishing off this exhaust system are dual 4-1/2" diameter blue flame 304 stainless steel clamp-on...

2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Dual 4-1/2" Diameter Carbon Fiber Exhaust Tips: Finishing off this exhaust system are dual 4-1/2" diameter carbon fiber 304 stainless steel clamp-on...

2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability.Dual 4-1/2" Diameter Black Exhaust Tips: Finishing off this exhaust system are dual 4-1/2" diameter black 304 stainless steel clamp-on exhaust tips....

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. The mufflers has a polished finish for ultimate corrosion resistance. Finishing...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered...

This system produced gains of up to +13 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual...

High-Flow 304 Stainless Steel Polished Muffler: This system features a high-flow 304 stainless steel polished muffler, producing a smooth sound. The muffler has a polished finish for ultimate corrosion resistance. Constructed from 2" - 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing Utilizes Factory Style Flange...