- 
  										
	
SPL Parts 2015+ Ford Mustang S550 Rear Lower Control Arm BushingVendor: SPL PartsS550 Mustang Rear Lower Control Arm bushings replace the mushy factory bushing in the rear lower control arm. One of the bushings from the factory is spherical, while in the other location Ford used a normal rubber bushing. This can create wheel hop under...
- Regular price
 - $224.10
 - Regular price
 - 
                
$249.00 - Sale price
 - $224.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 89-94 Nissan 240SX (S13) / 89-94 Nissan R32 Titanium Series HICAS Eliminator DogboneVendor: SPL PartsFor models with HICAS (High Capacity Actively Controlled Steering), our SPL Parts HICAS Eliminator Kit (HCK) eliminates the rear wheel steering feature. This provides a more linear driver control and feel at the limit, and prevents rear wheel steering from interfering with counter steering...
- Regular price
 - $629.10
 - Regular price
 - 
                
$699.00 - Sale price
 - $629.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2022+ BMW G8X Front Lower Control Arms M3/M4 AWD VersionVendor: SPL PartsBMW G8X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the G8X BMW M3/M4, and allow for full articulation with the proper ball joint angle. The main arm is slotted to allow the use of pinch bolts, and...
- Regular price
 - $764.10
 - Regular price
 - 
                
$849.00 - Sale price
 - $764.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 09-16 Audi B8 & B8.5 A4/A5/S4/S5 Front EndlinksVendor: SPL PartsS5 feature massive Teflon lined FK 1/2" Bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Custom heat treated Chromoly High Misalignment studs connect to the sway bar and offer extreme articulation capability (65deg) to prevent the endlink from...
- Regular price
 - $224.10
 - Regular price
 - 
                
$249.00 - Sale price
 - $224.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2019+ Hyundai Veloster N (JSN) Toe Only (For SPL EL JSN)Vendor: SPL PartsOur SPL Parts Hyundai Veloster N Eccentric Lockout Kit eliminate the stock eccentric toe bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust toe after eliminating the stock eccentric bolts. Our lockout plates...
- Regular price
 - $58.50
 - Regular price
 - 
                
$65.00 - Sale price
 - $58.50
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2019+ Hyundai Veloster N (JSN) Camber Only (For SPL EL JSN)Vendor: SPL PartsOur SPL Parts Hyundai Veloster N Eccentric Camber Lockout Kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber after eliminating the stock eccentric bolts. Our lockout plates...
- Regular price
 - $58.50
 - Regular price
 - 
                
$65.00 - Sale price
 - $58.50
 - Unit price
 - per
 
 - 
  										
	
SPL Eccentric Lockout Kit (Pair) For Rear Camber Arms - M-ChassisVendor: SPL PartsThe stock eccentric bolts provided by BMW for small camber adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Camber Lockout (ELC) kit eliminate the stock eccentric bolts to keep your rear alignment where you...
- Regular price
 - $58.50
 - Regular price
 - 
                
$65.00 - Sale price
 - $58.50
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2019+ Hyundai Veloster N Eccentric Lockout KitVendor: SPL PartsOur SPL Parts Hyundai Veloster N Eccentric Lockout Kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber and toe after eliminating the stock eccentric bolts. Our lockout...
- Regular price
 - $89.10
 - Regular price
 - 
                
$99.00 - Sale price
 - $89.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 89-94 Nissan R32 Skyline GTS / GTS-25 / GTS-T (RWD) Outer Tie Rod EndsVendor: SPL PartsSPL Parts Tie Rod Ends allow the tie rod end pivot point to be relocated, which will correct bump steer resulting from a lowered vehicle, modified caster or lower arm geometry, thus reducing lap times.Precision CNC machined and heat treated 4340 alloy shanks are...
- Regular price
 - $269.10
 - Regular price
 - 
                
$299.00 - Sale price
 - $269.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 06-13 BMW 3 Series (E9X) Camber Eccentric Lockout KitVendor: SPL PartsThe stock eccentric bolts provided by BMW for small camber adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout Camber Arm (ELC) kit eliminate the stock eccentric bolts to keep your rear alignment where...
- Regular price
 - $58.50
 - Regular price
 - 
                
$65.00 - Sale price
 - $58.50
 - Unit price
 - per
 
 - 
  										
	
SPL Parts Adjustment WrenchVendor: SPL PartsOur black anodized CNC machined billet aluminum wrench is a useful addition to your racing tool box. Designed for use with our hybrid adjusters and hex links/turnbuckles, this small wrench works in tight spaces and will will not damage the finish on the adjuster.We...
- Regular price
 - $62.07
 - Regular price
 - 
                
$69.00 - Sale price
 - $62.07
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2015+ Ford Mustang (S550) Offset Front Tension RodsVendor: SPL PartsS550 Mustang Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide...
- Regular price
 - $584.10
 - Regular price
 - 
                
$649.00 - Sale price
 - $584.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 95-98 Nissan 240SX (S14) / 94-98 Nissan Skyline (R33) Offset Tension RodsVendor: SPL PartsSPL Parts Tension Rods (TR) provide for adjustment of front caster, allowing you to change front caster to optimize the turn-in response and to compensate for variances between the left and right caster. Low-friction articulating 3/4" FK Spherical Bearings on our Tension Rods eliminate...
- Regular price
 - $341.10
 - Regular price
 - 
                
$379.00 - Sale price
 - $341.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 89-94 Nissan 240SX (S13) / 89-02 Nissan Skyline (R32/R33/R34) Front Offset Tension RodsVendor: SPL PartsSPL Parts Tension Rods (TR) provide for adjustment of front caster, allowing you to change front caster to optimize the turn-in response and to compensate for variances between the left and right caster. Low-friction articulating 3/4" FK spherical bearings on our tension rods eliminate...
- Regular price
 - $341.10
 - Regular price
 - 
                
$379.00 - Sale price
 - $341.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 97-13 Chevrolet Corvette (C5/C6) Rear Outer Tie Rod EndsVendor: SPL PartsCorvette C5, C6 Rear Tie Rod Ends allow the tie rod end pivot point to be relocated, which will correct bump steer resulting from a lowered vehicle, modified caster or lower arm geometry, thus reducing lap times.Precision CNC machined 9310 alloy shanks with 190ksi...
- Regular price
 - $314.10
 - Regular price
 - 
                
$349.00 - Sale price
 - $314.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2016+ Chevrolet Camaro (Gen 6) Front Tie Rod Ends (Bumpsteer Adjustable)Vendor: SPL PartsSPL Parts Camaro Front Tie Rod Ends (TRE) allow the tie rod end pivot to be relocated, which will correct bump steer resulting from modified caster or lower arm geometry, thus reducing lap times. On cars that are lowered significantly, relocating the pivot point...
- Regular price
 - $314.10
 - Regular price
 - 
                
$349.00 - Sale price
 - $314.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 97-13 Chevrolet Corvette (C5/C6) Front Outer Tie Rod EndsVendor: SPL PartsCorvette C5, C6 Front Tie Rod Ends (TRE) allow the tie rod end pivot point to be relocated, which will correct bump steer resulting from a lowered vehicle, modified caster or lower arm geometry, thus reducing lap times.Precision CNC machined 9310 alloy shanks with...
- Regular price
 - $314.10
 - Regular price
 - 
                
$349.00 - Sale price
 - $314.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2015+ Ford Mustang (S550) Front Tension RodsVendor: SPL PartsS550 Mustang Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide...
- Regular price
 - $584.10
 - Regular price
 - 
                
$649.00 - Sale price
 - $584.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 95-98 Nissan 240SX (S14) / 94-02 Nissan Skyline (R33/R34) Front Tension RodsVendor: SPL PartsSPL Parts Tension Rods (TR) provide for adjustment of front caster, allowing you to change front caster to optimize the turn-in response and to compensate for variances between the left and right caster. Low-friction articulating 3/4" FK Spherical Bearings on our Tension Rods eliminate...
- Regular price
 - $332.10
 - Regular price
 - 
                
$369.00 - Sale price
 - $332.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2015+ Ford Mustang GT350 (S550) Mustang Front Tension RodsVendor: SPL PartsGT350 Mustang Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide...
- Regular price
 - $584.10
 - Regular price
 - 
                
$649.00 - Sale price
 - $584.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2016+ Chevrolet Camaro (Gen 6) Front Tension RodsVendor: SPL PartsCamaro Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing to provide a...
- Regular price
 - $584.10
 - Regular price
 - 
                
$649.00 - Sale price
 - $584.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 13-19 Cadillac ATS/ATS-V Front Tension RodsVendor: SPL PartsCadillac ATS and ATS-V Tension Rods (TR) provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Low-friction, smooth articulating FK Spherical Bearings eliminate the stock mushy rubber bushing...
- Regular price
 - $584.10
 - Regular price
 - 
                
$649.00 - Sale price
 - $584.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 89-02 Nissan Skyline (R32/R33/R34) Solid Subframe BushingsVendor: SPL PartsSPL Parts PRO Solid Aluminum Subframe Bushings (SSB) replace the stock mushy rubber bushings to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing around" under drivetrain torque or suspension load, maintaining optimum suspension geometry and reducing...
- Regular price
 - $233.10
 - Regular price
 - 
                
$259.00 - Sale price
 - $233.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 89-94 Nissan 240SX (S13) PRO Solid Subframe Conversion BushingsVendor: SPL PartsSPL Parts PRO Solid Subframe Conversion Bushings (SSB) are designed to allow S14/S15 subframes to be mounted on the S13 chassis or vice-versa. Our Solid Bushings prevent the subframe from "bouncing around" under drivetrain torque or suspension load, maintaining optimum suspension geometry and reducing...
- Regular price
 - $260.10
 - Regular price
 - 
                
$289.00 - Sale price
 - $260.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2016+ Mazda Miata (ND) Rear Upper Traction ArmsVendor: SPL PartsND Miata Rear Upper Traction Links (RUT) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These...
- Regular price
 - $359.10
 - Regular price
 - 
                
$399.00 - Sale price
 - $359.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2016+ Chevrolet Camaro (Gen 6) Rear Upper Traction ArmsVendor: SPL PartsCamaro Rear Upper Traction Links (RUT) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Our length adjustable links allow fine tuning of rear bumpsteer and anti squat characteristics. These arms...
- Regular price
 - $404.10
 - Regular price
 - 
                
$449.00 - Sale price
 - $404.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2016+ Mazda Miata (ND) Rear Upper Control ArmsVendor: SPL PartsND Miata Rear Upper Arms (RUA) greatly increase the range of rear camber adjustment for high performance track/street applications and are a must for lowered cars to meet alignment requirements. The adjustment range provided by the eccentric washer on the OEM control arm is...
- Regular price
 - $359.10
 - Regular price
 - 
                
$399.00 - Sale price
 - $359.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 06-15 Mazda Miata (NC) / 03-12 Mazda RX-8 Rear Upper Lateral (Camber) LinksVendor: SPL PartsNC Miata Rear Upper Arms (RUA) greatly increase the range of rear camber adjustment for high performance track/street applications and are a must for lowered cars to meet alignment requirements. The adjustment range provided by the eccentric washer on the OEM lower control arm...
- Regular price
 - $359.10
 - Regular price
 - 
                
$399.00 - Sale price
 - $359.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 2019+ Hyundai Veloster N Rear Upper Camber ArmsVendor: SPL PartsHyundai Veloster N Rear Upper Camber Arms allow for an increased range of rear camber adjustment, necessary for lowered cars and performance alignments. This provides more stability and predictability to the rear suspension for tighter handling. Using FEA (Finite Element Analysis) our CNC milled...
- Regular price
 - $449.10
 - Regular price
 - 
                
$499.00 - Sale price
 - $449.10
 - Unit price
 - per
 
 - 
  										
	
SPL Parts 06-13 BMW 3 Series/1 Series (E9X/E8X) Rear Upper Arm LinksVendor: SPL PartsStock non-M arms are made from sheet metal that is merely spot welded together, which tends to flex and bend under moderate loads let alone track day or racing stresses. If you use grippier tires and an engine with more torque, then the stock...
- Regular price
 - $809.10
 - Regular price
 - 
                
$899.00 - Sale price
 - $809.10
 - Unit price
 - per
 
 

						
						

						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
										
									











						
						
						
						
						
						

						
						
						
						
						
						

						
						
						
						
						
						
						
						
						
						
						
						
						
						
						
						

