Akrapovic BMW M8/M8 Comp Gran Coupe (F93) w/OPF/GPF Slip-On Line (Titanium) w/Carbon Tips 2020-2025

The Akrapovič BMW M8/M8 Comp Gran Coupe (F93) w/OPF/GPF Slip-On Line (Titanium) w/Carbon Tips (part S-BM/T/24H) is a Slip-On Line exhaust for the BMW M8 Gran Coupe (F93). On the Akrapovič dyno it added 13.1 hp and 13.3 lb-ft.

Benefits

This rear-section system takes the place of the stock silencers. Freer flow through the mufflers sharpens throttle response and gives the engine a clearer voice, while the lighter construction takes weight off the rear axle. Valves in the system keep it calm at a steady cruise and open it up for a much louder, deeper sound when you push on. An optional Akrapovič Sound Kit is offered for this car to add more control over the exhaust sound. Akrapovič also offers optional link pipes for this car, intended for closed-course use.

Materials and Construction

Akrapovič works titanium in-house, from forming the tubes to welding the sections. The material is light, strong and very resistant to heat and corrosion. Some of the parts are cast in Akrapovič's own titanium foundry. The carbon-fibre parts are finished by hand.

Every Akrapovič part is engineered for a specific car rather than adapted from a universal design. That is why the fitment list below is so specific.

Features

• Titanium construction
• Akrapovič dyno result: +13.1 hp at 5,100 rpm
• Akrapovič dyno result: +13.3 lb-ft at 5,100 rpm
• Weighs 27.6 lb (12.5 kg), 10.1 lb (26.9%) less than stock
• Valved for a quiet cruise and a louder sound under load
• Carbon fibre finish
• Engineered and built by Akrapovič in Slovenia
• Developed on the Akrapovič dyno and in its sound lab

What Is Included

• Akrapovič BMW M8/M8 Comp Gran Coupe (F93) w/OPF/GPF Slip-On Line (Titanium) w/Carbon Tips (S-BM/T/24H)

Specs

• Part number: S-BM/T/24H
• Brand: Akrapovič
• Material: titanium
• Finish: carbon fibre
• Type: Slip-On Line exhaust
• Akrapovič product weight: 27.6 lb (12.5 kg)
• Weight saving vs. stock: 10.1 lb (4.6 kg), 26.9%
• Installation time: about 240 minutes
• Shipping dimensions: 56 x 40 x 12 in (142 x 102 x 30 cm)
• Shipping weight: 60 lb (27.2 kg)

Fitment Notes

• Fitment covers the US-market cars in the table below; check the chassis and engine before ordering.
• Professional installation is recommended.