Akrapovic Mercedes-Benz CLA35 AMG (C118) Slip-On Line (Titanium) w/ Titanium Tips 2020-2027

This is the genuine Akrapovič Mercedes-Benz CLA35 AMG (C118) Slip-On Line (Titanium) w/ Titanium Tips, part number S-ME/TI/10H, a Slip-On Line exhaust that fits the Mercedes-Benz CLA35 AMG (C118). On the Akrapovič dyno it added 5.2 hp and 4.9 lb-ft, tested on a Mercedes-AMG A 35 (W177).

Benefits

This rear-section system takes the place of the stock silencers. Freer flow through the mufflers sharpens throttle response and gives the engine a clearer voice, while the lighter construction takes weight off the rear axle. Valves in the system keep it calm at a steady cruise and open it up for a much louder, deeper sound when you push on. Akrapovič also offers optional link pipes for this car, intended for closed-course use.

Materials and Construction

Titanium is the material Akrapovič is best known for. It is much lighter than steel, handles heat well and resists corrosion, so the system keeps its strength and finish over many heat cycles. Some of the parts are cast in Akrapovič's own titanium foundry.

Every Akrapovič part is engineered for a specific car rather than adapted from a universal design. That is why the fitment list below is so specific.

Features

• Titanium construction
• Akrapovič dyno result: +5.2 hp at 5,100 rpm
• Akrapovič dyno result: +4.9 lb-ft at 5,100 rpm
• Weighs 19.8 lb (9.0 kg), 10.3 lb (34.1%) less than stock
• Valved for a quiet cruise and a louder sound under load
• Natural titanium finish
• Made for the specific cars in the table below
• Genuine Akrapovič part

What Is Included

• Akrapovič Mercedes-Benz CLA35 AMG (C118) Slip-On Line (Titanium) w/ Titanium Tips (S-ME/TI/10H)

Specs

• Part number: S-ME/TI/10H
• Brand: Akrapovič
• Material: titanium
• Finish: natural titanium
• Type: Slip-On Line exhaust
• Akrapovič product weight: 19.8 lb (9.0 kg)
• Weight saving vs. stock: 10.3 lb (4.7 kg), 34.1%
• Installation time: about 270 minutes
• Shipping dimensions: 56 x 40 x 12 in (142 x 102 x 30 cm)
• Shipping weight: 60 lb (27.2 kg)

Fitment Notes

• Fits the US-market vehicles listed in the table below.
• We recommend installation by a qualified shop.