Akrapovic Porsche 911 GT3 (991.2) Slip-On Race Line (Titanium) w/o Tail Pipe Set 2014-2019

Built for the Porsche 911 GT3 (991), Porsche 911 GT3 (991.2) and Porsche 911 GT3 RS (991.2), the Akrapovič Porsche 911 GT3 (991.2) Slip-On Race Line (Titanium) w/o Tail Pipe Set (S-PO/TI/8) is a Slip-On Line exhaust engineered by Akrapovič for these cars. On the Akrapovič dyno it added 8.7 hp and 11.2 lb-ft, tested on a Porsche 911 GT3 / GT3 Touring (991.2).

Performance and Sound

This rear-section system takes the place of the stock silencers. Freer flow through the mufflers sharpens throttle response and gives the engine a clearer voice, while the lighter construction takes weight off the rear axle. Valves in the system keep it calm at a steady cruise and open it up for a much louder, deeper sound when you push on. Akrapovič also offers optional link pipes for this car, intended for closed-course use.

Materials and Construction

The titanium construction saves weight compared with the steel factory parts. Titanium also handles high exhaust temperatures and takes on its distinctive colouring with use.

Akrapovič was founded in Slovenia in 1990 by Igor Akrapovič and built its name in motorsport before moving into road-car exhausts. That racing background shows in the attention to weight, flow and build quality.

Features

• Titanium construction
• Akrapovič dyno result: +8.7 hp at 4,400 rpm
• Akrapovič dyno result: +11.2 lb-ft at 4,400 rpm
• Weighs 8.7 lb (3.9 kg), 10.3 lb (54.3%) less than stock
• Valved for a quiet cruise and a louder sound under load
• Natural titanium finish
• Engineered and built by Akrapovič in Slovenia
• Developed on the Akrapovič dyno and in its sound lab

What Is Included

• Akrapovič Porsche 911 GT3 (991.2) Slip-On Race Line (Titanium) w/o Tail Pipe Set (S-PO/TI/8)

Required Parts (Sold Separately)

• Akrapovič tail pipe set (required, sold separately)

Specs

• Part number: S-PO/TI/8
• Brand: Akrapovič
• Material: titanium
• Finish: natural titanium
• Type: Slip-On Line exhaust
• Akrapovič product weight: 8.7 lb (3.9 kg)
• Weight saving vs. stock: 10.3 lb (4.7 kg), 54.3%
• Installation time: about 240 minutes
• Shipping dimensions: 34.1 x 10.3 x 7.8 in (87 x 26 x 20 cm)
• Shipping weight: 8.8 lb (4.0 kg)

Fitment Notes

• Fitment covers the US-market cars in the table below; check the chassis and engine before ordering.
• We recommend installation by a qualified shop.