AP Racing Radi-CAL Competition Front Kit 372mm - Toyota GR Supra

The AP Racing by Essex Radi-CAL Competition Brake Kit is a front brake upgrade for the 2020-2025 Toyota GR Supra 3.0. It pairs AP Racing CP9660 Radi-CAL Pro5000R six-piston calipers with 372 x 34mm, 72-vane AP Racing J Hook discs on fully floating aluminum hats, built for track days and competition driving. Clears the OEM Supra wheels without a wheel spacer.

Why upgrade

The kit removes about 23 lb of unsprung weight from the front of the car compared with the OEM brakes. Each caliper weighs 6.2 lb without pads, against 9.2 lb for the factory four-piston fixed caliper. Each two-piece disc weighs 21 lb, compared with 28.8 lb for the original 348mm disc. The caliper takes a 18mm thick pad for long life and heat tolerance. Every component is designed to resist the heat of extended track sessions. Pistons are sized to maintain brake bias and work with the OEM master cylinder and ABS.

Caliper and disc construction

On the Toyota GR Supra, the CP9660 caliper mounts radially on a dedicated bracket at 180mm centers with a 42mm offset, with an M10x1.0 inlet thread. The championship-winning 72-vane AP Racing J Hook discs are fully floating. The discs use anti-knockback, anti-rattle attachment hardware. The disc metallurgy is designed for the temperatures seen on track, for a long service life. Spiegler stainless steel brake lines with a clear sheath reduce compliance compared with the OEM rubber lines. The caliper uses a commonly available 18mm thick pad shape. Ventilated, domed-back stainless steel pistons keep heat out of the brake fluid for a very firm pedal. Anti-knockback springs behind the caliper pistons limit pad knockback.

Features

• AP Racing CP9660 six-piston calipers
• 372 x 34mm, 72-vane J Hook discs on floating hats
• About 23 lb less unsprung weight
• 18mm thick brake pads
• Pistons sized for the OEM master cylinder and ABS

What's Included

• One pair AP Racing CP9660 Radi-CAL Pro5000R six piston calipers
• One pair 372x34mm AP Racing CP7177, 72 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
• One pair caliper mounting brackets and hardware
• One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
• Detailed installation instructions

Brake pads are not included.

Specifications

Video

Fitment notes

This front kit fits the vehicles in the table below, which we confirmed against two sources using US model years. Essex has confirmed clearance with OEM 19 inch Toyota front wheels and Volk TE37 Saga 18x10 +25. Not for the four-cylinder GR Supra 2.0. Check your wheel with the Essex wheel fitment template before ordering.

Fitment