APEX Wheels SL-12RT Forged Wheel | 18x10 ET32 | 5x120.65

Built for C6 and C7 widebody Corvettes, the APEX Wheels SL-12RT in 18x10 ET32 is one of the newest forged designs in the APEX Touring Line. It sets twelve straight spokes inside a stepped machined outer lip and is drilled 5x120.65 with a 70.3mm center bore that matches the Corvette hub, so it centers directly with no hub rings.

APEX lists this 18x10 at ET32 as a front-axle size for staggered setups. Each SL-12RT size gets a face profile matched to its vehicles and brakes, and this one uses Profile 2, chosen for caliper clearance on the cars in the fitment table below.

Features

• Twelve straight spokes with deep side-milled sides for lower weight
• Machined outer lip on the Anthracite and Race Silver finishes; Satin Black is one color across face and lip
• Sprint-spec reinforced inner lip from the APEX Sprint Line, with 32% more material where the barrel needs it
• Forged from 6061-T6 aluminum
• Vehicle-specific Profile 2 face for brake clearance
• APEX center cap included
• Uses 60 Degree Conical lug hardware

Forging starts with a solid 6061-T6 aluminum billet pressed under very high pressure, which closes porosity and aligns the grain. That is why a forged wheel can weigh less than a cast wheel of the same size while carrying more load. This 18x10 ET32 weighs 20.8 lbs.

Three finishes are offered in this size: Anthracite, a dark grey with a bright machined lip; Race Silver, a classic motorsport silver with a machined lip; and Satin Black, a single uniform finish across face and lip. The finish changes only the color. Size, offset and weight are the same in every finish.

APEX backs its forged wheels with a lifetime structural warranty and a one-year finish warranty. New SL-12RT production may ship as a pre-order, so lead time is confirmed when you order.

What Is Included

• One (1) APEX SL-12RT wheel in the selected finish
• APEX center cap
• Sold individually. Order the quantity you need.

Wheel Specifications:

Fitment Notes:

• Fitment comes from APEX's vehicle configurator for this exact 18x10 ET32 wheel, checked against a second source. Years are US model years.
• Engine "All" covers every engine in that chassis unless the row lists one. Any condition for a vehicle is in its Notes cell.
• "Front only" or "Rear only" means that axle only, for staggered setups. No axle note means front and rear.
• Lug hardware must match the 60 Degree Conical seat.
• Lowered cars, wider tires or big brake kits can change clearance. Check before you order.

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.

Fitment: