Dinan High Performance Adjustable Coil-Over Suspension for BMW F10 M5 and F06 M6 Gran Coupe

Dinan's high-performance adjustable coil-over kit (D190-1011) is a height-adjustable spring package that keeps the factory BMW Electronic Damper Control shocks in place. Threaded collars, machined from 6061-T6 aluminum and black-anodized, let you set front and rear ride height without replacing the EDC dampers. Dinan-spec progressive bump stops and suspension packers are included so the installer can set bump-stop clearance after the car is lowered.

On the F10 M5, Dinan allows up to 1.25 inches of lowering, with a 3/4-inch drop recommended if you want to keep ride quality. On the F06 M6 Gran Coupe the maximum is 1.125 inches, with a 5/8-inch drop recommended. Spring rates are 15% stiffer than stock front and rear. The extra rate and the lower stance are meant to cut body roll, reduce dive under braking and squat under acceleration, and keep more consistent traction at speed. Because the car can be lowered a long way, Dinan tells the installer to check tire clearance in every situation; Dinan is not responsible for damage if that check is skipped.

Dinan titles the kit for 2012-2016 M5 and 2014-2019 M6 Gran Coupe cars. The US table uses those models and then cuts the M5 to 2013-2016, which is the US F10 M5 run. The M6 coverage is the F06 Gran Coupe only; F12/F13 M6 coupe and convertible are not on Dinan's listing. The install sheet also states the kit is for stock EDC front and rear shocks and should not be used on any other application. Shipping size from the distributor sheet is 24.5 x 18.9 x 11.3 inches at 44.5 pounds.

Coverage follows Dinan's standard limited warranty: the remainder of the vehicle factory limited warranty (up to 4 years / 50,000 miles) or 2 years / unlimited miles, whichever is greater. The F10 M5 store page and the later DNN-prefixed listing share this part number and redirect here.

Features

• Height-adjustable coil-over kit that retains the factory BMW EDC shocks
• M5: up to 1.25 in of lowering, 3/4 in recommended for ride quality
• M6 Gran Coupe: up to 1.125 in of lowering, 5/8 in recommended for ride quality
• 15% stiffer springs front and rear, with progressive bump stops and packers
• 6061-T6 aluminum threaded collars, black anodized

What's Included

• Dinan High Performance Adjustable Coil-Over Suspension (D190-1011)

Specifications

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.

Fitment Notes

• For factory EDC shocks only. Do not use this kit with other dampers.
• F12/F13 M6 coupe and convertible are not on Dinan's listing for this part.
• Confirm tire clearance at the chosen ride height before driving.