Dinan

D100-0917

Dinan Performance Spring Set for BMW E92 M3

Product Description   

Dinan's Performance Spring set for the E92 M3 provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 1/2" in front and 1/2" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle. 

NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.

 Benefits of the Dinan Performance Spring Set for the E92 M3:

+ Decreased body roll from higher spring rates
+ Lowers the vehicle 1/2" in front and 1/2" in the rear
+ Preset to prevent spring sag
+ Compatible with both conventional and factory electronic shocks

Models Supported by Dinan Performance Spring Set for the E92 M3:

  •  2008-2013 M3 E92 Coupe 

Corresponding Ride Quality and Handling Kit highly recommended.
Refer to description for details.

Please consult the suspension stage matrix to see what individual components make up each of the different Dinan suspension stages that were offered in the past.

Product Specifications
Labor Hours/Installation Hours 7.50
Included Notes 2 front springs, 2 rear springs
Required Items Highly Recommended: D193-9031 - Supplemental Ride Quality & Handling Kit for BMW E92 M3 EDC or D193-9034 - Supplemental Ride Quality & Handling Kit for BMW E92 M3 non-EDC (see product description for details).

Subscribe