Dinan's Performance Spring set for the F30 320i and 328i/330i (non xDrive) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the 320i and 328i/330i by a 3/4" in front and 3/4" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 30% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel.
The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph, up to the top speed of the vehicle.
NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.
Benefits of the Dinan Performance Spring Set for the F30 320i & 328i/330i (non xDrive):
+ 30% increase in spring stiffness
+ Lowers the vehicle 3/4" in front and 3/4" in the rear
+ Preset to prevent spring sag
+ Compatible with both conventional and factory electronic shocks
Dinan Performance Spring Set for the F30 320i & 328i/330i (non xDrive)
- 2012-2016 328i & xDrive F30 Sedan
- 2013-2018 320i & xDrive F30 Sedan
- 2017-2018 330i & xDrive F30 Sedan
Corresponding Ride Quality and Handling Kit highly recommended.
Refer to description for details.
|Labor Hours/Installation Hours
Highly Recommended: D193-3001 - Supplemental Ride Quality & Handling Kit for BMW F30 320i 328i 330i (see product description for details).