Dinan Supplemental Ride Quality & Handling Kit for BMW M3 2008-2013 (OEM EDC Shocks)

The Dinan Supplemental Ride Quality & Handling Kit D193-9031 is the complete handling kit for the E90/E92/E93 BMW M3 with factory EDC (Electronic Damper Control) shocks, lowered on Dinan performance springs. It combines Dinan-tuned progressive-rate bump stops with front guide supports and Dinan rear shock mounts.

On a lowered car the factory bump stops engage too early. The Dinan stops let the spring use its full compression travel, so the car is less likely to bottom out harshly, rides better and holds more grip in corners than with springs alone. They are made from OE-quality material for a progressive feel, as the product photos show. Dinan says the front guide supports add about 3/8 inch of usable suspension travel and the rear shock mounts add about 1/2 inch of rear shock travel, which matters on a lowered M3.

Fitment is the 2008-2013 M3 sedan, coupe and convertible with factory EDC (Electronic Damper Control) shocks. For an M3 with conventional non-EDC shocks, use Dinan kit D193-9034. Dinan says its spring sets should be installed with the matching handling kit to reach the advertised ride height and ride quality.

The kit contains the bump stops, front guide supports, rear shock mounts and the bushings, sleeves and small hardware shown in the photos. It is best installed at the same time as the Dinan springs. Emission code 5: it does not affect emissions and is legal in all 50 states. Coverage is Dinan's limited warranty: the remainder of the vehicle's factory limited warranty (up to 4 years / 50,000 miles) or 2 years with unlimited miles, whichever is greater. Dinan will not warranty ride or handling complaints on spring-only installs that skip this kit. It ships in one carton of about 10 x 8 x 8 inches at roughly 7 pounds.

Features

• For the 2008-2013 E9x M3 with EDC
• Bump stops, guide supports and rear shock mounts
• About 3/8 in more front travel
• About 1/2 in more rear shock travel
• Tuned for Dinan springs

What's Included

• Dinan Supplemental Ride Quality Handling Kit (D193-9031)

Specifications

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.

Fitment Notes

• For M3s with factory EDC shocks.
• Non-EDC M3: use D193-9034.
• Use with Dinan performance springs.