GiroDisc 380mm Replacement Rings 2003-2024 Audi R8, RS4, RS5, RS6, Lamborghini Gallardo, Huracan, Murcielago

GiroDisc slotted replacement rings for the 2003-2024 Audi R8, RS4, RS5, RS6, Lamborghini Gallardo, Huracan, Murcielago. When the iron on your 2-piece rotors wears out, these rings bolt back onto your existing Brembo or StopTech hats, so you replace only the part that wears. It is the most cost-effective way to keep a track car stopping well over many seasons.

How the rings work

A 2-piece rotor splits into an iron ring that wears and an aluminum hat that does not. These rings are GiroDisc's own cast iron with curved internal vanes that pump cooling air through the disc, and a slotted face that keeps the pad surface fresh. They mount to your existing Brembo or StopTech hats with floating drive pins, so the ring can grow with heat and center itself between the pads.

GiroDisc makes these rings as a direct swap for the iron on Brembo and StopTech 2-piece rotors of the listed size, so you can keep the hats you already run.

When to replace them

Swap the rings when they reach minimum thickness, or sooner if a crack reaches the outer edge of the ring. Bed in new pads with the new rings for the best pedal feel. Reusing the hats saves weight and money every time the iron is due.

What's Included

Two slotted iron rings. New drive pin hardware is also supplied. Hats are not included: you reuse your existing Brembo or StopTech hats.

Specifications

Fitment notes

Some listings depend on the factory brake package or trim, so check the notes in the Model column of the fitment table before you order. GiroDisc also lists versions sold outside the US (Audi RS4 B8). The table below covers US-market and race fitment. The product photo is GiroDisc's representative image of its replacement rings.

Fitment