GiroDisc Rear Caliper Rebuild Kit 2013-2017 Dodge Viper

A GiroDisc rear caliper rebuild kit for the 2013-2017 Dodge Viper and the factory race cars listed below. Hard track driving cooks the piston seals and dust boots inside a caliper long before the caliper itself is worn. This kit replaces them, so the pistons seal and retract properly again and the caliper looks and works like new.

Why rebuild

Piston seals do more than stop fluid leaks. They also pull the pistons back slightly when you release the pedal, which keeps pad drag and knock-back in check. Once track heat has cooked them, pedal feel suffers and pads wear unevenly. Cooked dust boots crack and let grit reach the piston bores. Rebuilding with fresh seals and boots restores both jobs for far less than new calipers.

Made to GiroDisc's specification

The dust boots and piston seals are made to GiroDisc's specifications for this caliper. Clean the bores and pistons carefully, inspect the pistons for scoring, lubricate the new seals with fresh brake fluid or assembly lube, and bleed the system once the caliper is back on the car.

Protect the rebuild

GiroDisc recommends pairing freshly rebuilt calipers with its titanium pad shields, which keep heat from reaching the pistons, seals and fluid. That lengthens the time between rebuilds.

What's Included

Piston seals plus dust boots, enough to rebuild one caliper. Order one kit per caliper, so a full rear axle takes two kits.

Specifications

Fitment notes

GiroDisc also lists it for factory race cars: Viper ACR-X. The product photo is GiroDisc's representative image for this part.

Fitment