GiroDisc 380x34mm Replacement Rings for Brembo 62mm Wide Annulus Brakes

GiroDisc slotted replacement rings for the Brembo 380 x 34 mm big brake kits with a 62 mm wide annulus pad. When the iron on your 2-piece rotors wears out, these rings bolt back onto your existing Brembo or StopTech hats, so you replace only the part that wears. It is the most cost-effective way to keep a track car stopping well over many seasons.

How the rings work

A 2-piece rotor splits into an iron ring that wears and an aluminum hat that does not. These rings are GiroDisc's own cast iron with curved internal vanes that pump cooling air through the disc, and a slotted face that keeps the pad surface fresh. They mount to your existing Brembo or StopTech hats with floating drive pins, so the ring can grow with heat and center itself between the pads.

GiroDisc makes these rings as a direct swap for the iron on Brembo and StopTech 2-piece rotors of the listed size, so you can keep the hats you already run.

When to replace them

Swap the rings when they reach minimum thickness, or sooner if a crack reaches the outer edge of the ring. Bed in new pads with the new rings for the best pedal feel. Reusing the hats saves weight and money every time the iron is due.

What's Included

Two slotted iron rings. Hats are not included: you reuse your existing Brembo or StopTech hats. The existing hardware is reused.

Specifications

Fitment notes

These rings replace the iron on Brembo 380 x 34 mm big brake kits with a 62 mm wide annulus pad. Check your caliper or rotor size before you order. Hardware is not included with these rings; new hardware can be sourced if the existing fasteners are damaged. The product photo is GiroDisc's representative image of its replacement rings.

Fitment