Remus F87 M2 Valved Cat-Back Exhaust (N55, Tips Req) | 2016-2018

The Remus Cat-Back Sport Exhaust 088016 1500 is a valved F87 M2 exhaust that replaces the factory rear silencer on the 2016-2018 BMW M2 Coupe with the N55 engine. Two Remus sport silencers with built-in valves take the place of the stock muffler, giving the turbocharged straight-six a sportier, more sonorous voice while the valves still let the car run quieter when the factory valve control closes them.

What This BMW M2 Exhaust Does

The stock M2 exhaust leaves the mid-section through a single 80 mm pipe. The Remus system splits the flow into two 65 mm pipes, one to each silencer. Remus measured a gain of 8.7 hp and 11.8 Nm (8.7 lb-ft) on the N55 with this system, and the system weighs 1.1 kg (2.4 lb) less than the factory exhaust. The valves stay connected to the car: Remus supplies an additional genuine BMW valve actuator and a Y-cable, which connect both valves to the car's onboard electronics so they keep working with the factory valve control. That makes it a true valved sport exhaust system for the N55 M2, not a straight-through pipe.

Materials and Construction

Remus builds the system from T304 stainless steel, shot-blasted to relieve stresses from production, and uses thinner but equally strong sidewalls to save weight. It is hand-built in Europe at the Remus plant in Bärnbach, Austria. The system bolts to the factory flange and hangs on the original rubber mounts, so no cutting is needed. In Europe it carries EC type approval, and it is covered by Remus's 24-month warranty.

Features

• Dual valved sport silencers that replace the factory rear muffler
• 8.7 hp and 11.8 Nm (8.7 lb-ft) gain measured by Remus on the N55
• 1.1 kg (2.4 lb) lighter than the stock exhaust
• Extra genuine BMW actuator and Y-cable included, so both valves keep factory control
• Flow splits from one 80 mm pipe to two 65 mm Remus pipes
• T304 stainless steel, hand-built in Europe; 24-month Remus warranty
• EC type approval in Europe

What Is Included

• 1 Remus flange tube
• 2 Remus connection tubes
• 2 Remus sport silencers
• 2 Remus valve tubes
• 1 additional genuine BMW actuator and Y-cable
• 1 assembly kit

Required Parts

The silencers come without tailpipes, and a Remus quad tailpipe set is needed to finish the install. Use the Add Exhaust Tips option above to add one of the sets Remus lists for the F87 M2: chrome, black chrome, Street Race with carbon inserts, carbon, or titanium OPT. The titanium OPT sets are supplied with the four OPT adapters they need. Each tip option shows its own photo when selected.

Specs

• Part number: 088016 1500
• Brand: Remus
• Type: cat-back sport exhaust (Remus Sport Silencer L/R)
• Material: T304 stainless steel
• Valves: integrated, run by the factory valve control
• Pipe size: stock 80 mm to Remus 2 x 65 mm
• Weight saving vs. stock: 1.1 kg (2.4 lb)
• Tailpipes: not included (see Add Exhaust Tips)
• Shipping dimensions: 61.4 x 29.9 x 10.6 in (156 x 76 x 27 cm)
• Shipping weight: 60.5 lb (27.4 kg)

Fitment Notes

• Fits the US-market BMW M2 Coupe (F87) with the N55 engine listed below.
• Remus does not list this system for the M2 Competition (F87N, S55 engine) or the M2 G87; it makes separate systems for those cars.
• Professional installation is recommended. Remus publishes step-by-step installation instructions for this system.

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.