Soul Performance Resonated Muffler Bypass Exhaust For BMW F10 M5

VENDOR: Soul Performance


All orders will include an AutoTalent window decal
Choose Tips



The M5 is quite refined with generous sound deadening and heavy muffling in the exhaust, muting the 4.4L’s intoxicating symphony – but we have a solution. Evaluation of the factory midpipes reveals a very high flowing and relatively smooth flowing design. BMW incorporated a factory break point for upgraded exhausts and the rear section is what holds the exhaust back. The Soul Resonated Muffler Bypass Exhaust forgoes the factory mufflers for a clamp on, 3″ straight pipe design with the addition of race resonators to minimize drone.

The straight through design of our race resonators encourages maximum power and sound under heavy throttle while cutting down on harsh frequencies that can make their way into the cabin and cause droning on partial throttle and during cruising conditions. This is the ideal solution to pair with aftermarket downpipes to prevent drone and raspiness. The Y pipe setup exiting out through quad tips encourages equal exhaust distribution and tip adjustability to allow for either a flush or staggered appearance in the bumper. Turn up the aggression but not the drone with SOUL.

Each set of muffler bypass pipes is made from mandrel-bent T304L 3″ .065″ wall stainless steel tubing, straight through race resonators with a full metal packing design for maximum durability, and laser cut brackets for perfect fitment. Choose from several hand-finished exhaust tip options to get the look that suits your M6 best. Mikalor Supra Heavy-Duty Clamps are included to securely hold the tips onto the system.

Soul Performance development M5 reached a peak power of 610 whp and 615 ft-lbs of torque during third-party dyno testing at R/T Tuning. Mods included catless downpipes, custom tune, and our Resonated Muffler Bypass Exhaust. Power gains are identical as the M6 uses the same 4.4L V8.

Each exhaust system is tested in a fixture to ensure perfect fitment. Installation requires cutting the original BMW exhaust at a factory break point (marked with a dimple) which allows for reinstallation of the factory system if necessary. Thorough installation instructions are included in the box for a straightforward install that can be performed by most DIY enthusiasts.


  • Aggressive custom exhaust system
  • Weighs approximately 14.7 lbs / 6.6 kg less than factory exhaust components
  • Increases the desirable spectrum of engine notes and tone while minimizing drone with race resonators
  • All Soul Performance Products components are backed by our Lifetime Warranty for both street and track use
  • Stainless Steel T304L 3″ .065
  • Perfect Shape and Design
  • Perfect fitment

            Vehicle Fitment:

            • 2011 BMW F10 M5
            • 2012 BMW F10 M5
            • 2013 BMW F10 M5
            • 2014 BMW F10 M5
            • 2015 BMW F10 M5
            • 2016 BMW F10 M5


                                      Images are for representation purpose only and may differ depending on application.