Skip to content

E92 M3 Öhlins Road and Track Coilovers: E9X and E46 Guide

by AutoTalent 09 Nov 2026 0 Comments

Quick answer: the E92 M3 Öhlins Road and Track kit (part BMS MI40S1) is Öhlins' Dual Flow Valve (DFV) coilover system for the 2008-2013 BMW M3. Öhlins lists it for the E90 sedan, E92 coupe and E93 convertible. It has height-adjustable monotube dampers, an inverted front strut, one damping adjuster per corner and 60 N/mm front / 120 N/mm rear springs. It's built for a car that's driven daily and tracked on weekends. At AutoTalent it's $3,600, and the E46 M3 version (BMS MI30S1) is $3,000, at the time of writing. If your E9X M3 has EDC, you'll also need Öhlins' EDC cancellation kit.

Below we cover what's in each kit, how the E9X and E46 versions differ, the EDC question, and how to set the dampers up.

Silver BMW M3 E92 coupe cornering on a racetrack at sunset

E92 M3 Öhlins Road and Track at a glance

E9X M3 (E90 / E92 / E93) E46 M3
Öhlins part number BMS MI40S1 BMS MI30S1
US model years (AutoTalent listing) 2008-2013 2001-2006
Damper technology DFV, monotube; inverted MacPherson front strut DFV; inverted MacPherson front strut, conventional rear shock
Damping adjustment One adjuster per damper (compression and rebound together) One adjuster per damper (compression and rebound together)
Spring rates (Öhlins) 60 N/mm front, 120 N/mm rear 70 N/mm front, 110 N/mm rear
Lowering (Öhlins) Approx. 0-40 mm front and rear About 30 mm lower than stock with the recommended setup
Top mounts Uses original top mounts Uses original top mounts
Extra parts EDC cancellation kit on EDC-equipped cars None listed
Price at AutoTalent* $3,600, E9X M3 Road & Track $3,000, E46 M3 Road & Track

*Prices at the time of writing. Specifications are from Öhlins' published product data and mounting instructions.

What you get with Öhlins Road and Track on the E92 M3

  • Dual Flow Valve (DFV): Öhlins' patented valve controls compression and rebound through one valve, so the damper can react smoothly to small, sharp bumps and still control the car under load. Öhlins' goal is a refined ride on the road with traction and control on track.
  • Monotube dampers with an inverted front strut: the front MacPherson strut is upside down for strength, and the rear is an aluminum monotube shock.
  • One adjuster per corner: Öhlins' E9X spec lists a 1-way adjuster with 25 clicks, so you can set each corner separately.
  • Independent height adjustment: the front and rear have a spring preload adjuster and a separate damper length adjuster, so you can set ride height without changing preload.
  • Rebuildable, with a 2-year warranty: Öhlins dampers can be serviced and revalved, and the kit is corrosion tested to ISO 9227.

The EDC question on the E9X M3

Many E90, E92 and E93 M3s were ordered with Electronic Damper Control (EDC). Road & Track dampers are manually adjusted, so on an EDC car Öhlins lists a separate EDC cancellation kit for the M3 E90/E92, with its own mounting instructions. It's needed because the factory electronic dampers come out when the Road & Track kit goes in. Not sure if your car has EDC? Send us the VIN and we'll check before you order.

Gold adjustable coilover strut with a red preload collar installed in the front wheel well of a dark sport coupe

E46 M3 vs E92 M3 Öhlins kits: what's different

Both kits use DFV and one damping adjuster per corner, and both use the factory top mounts. The E46 kit runs a slightly stiffer front spring (70 vs 60 N/mm) and a softer rear (110 vs 120 N/mm). Its rear is a conventional shock with a separate spring and preload adjuster. Per Öhlins' mounting instructions, the E46 sits about 30 mm lower than stock at the recommended preload, and each turn of the rear height adjuster moves it 1.5 mm. If you own an E46 M3, our E46 M3 mods guide shows where suspension fits alongside the S54 reliability work.

Setting up your Road and Track kit

Start with Öhlins' base settings and adjust in small steps. For the E46 M3, Öhlins' mounting instructions recommend these rebound settings:

Use Recommended rebound setting (E46 M3, Öhlins)
Track 0-7 clicks
Winding road 5-10 clicks
Street 10-20 clicks

For the E9X M3, use the setup data in the Öhlins manual that comes with the kit. Most owners run a softer street setting and add a few clicks for track sessions. Get a full alignment after installation and after any ride height change. Spare parts are available too: we list the E9X M3 Road & Track replacement rear damper and E9X M3 front dampers, so one corner can be serviced or replaced on its own.

Technician adjusting the rear damper of a dark blue BMW E90 M3 sedan in a racetrack paddock

Who the E92 M3 Öhlins Road and Track kit is for

  • Daily-driven M3s that see track days: the main use case. You get a lower, flatter, more controlled car without a punishing ride.
  • Owners replacing tired factory dampers: on a car this age the original dampers are often worn, and Road & Track is a clear step up from stock.
  • Not ideal for: dedicated race cars that need separate high- and low-speed adjustment. Öhlins' track-focused lines are built for those.

To compare Road & Track kits across other cars, read our Öhlins Road and Track guide, or browse Öhlins for BMW and the full Öhlins collection.

E92 M3 Öhlins Road and Track FAQ

Does the Öhlins Road and Track kit fit the E90 M3 sedan and E93 convertible?

Yes. Öhlins lists the BMS MI40S1 Road & Track kit for the BMW M3 E90 sedan, E92 coupe and E93 convertible, plus the 2011 1M Coupe (E82). At AutoTalent it is listed for the 2008-2013 BMW M3.

Do I need an EDC cancellation kit for my E92 M3?

If your M3 has Electronic Damper Control (EDC), yes. Öhlins lists a separate EDC cancellation kit for the M3 E90/E92 alongside the Road & Track kit. Cars without EDC don't need it. Contact us with your VIN and we'll confirm what you need.

How much does Öhlins Road and Track cost for the E92 M3?

At AutoTalent, the 2008-2013 BMW M3 (E9X) Road & Track coilover system (BMS MI40S1) is $3,600, and the 2001-2006 E46 M3 kit (BMS MI30S1) is $3,000, at the time of writing.

How low does the E92 M3 sit on Öhlins Road and Track?

Öhlins lists an approximate lowering range of 0-40 mm at the front and rear for the E9X M3 kit, and both ends use separate spring preload and damper length adjustment. Set the final height to suit your wheels, tires and use.

What spring rates come with Öhlins Road and Track for the E92 and E46 M3?

Öhlins lists 60 N/mm front and 120 N/mm rear springs for the E9X M3 kit (BMS MI40S1), and 70 N/mm front and 110 N/mm rear for the E46 M3 kit (BMS MI30S1).

Is Öhlins Road and Track good for a daily-driven E92 M3?

Yes. That's what the kit is designed for. Öhlins' Dual Flow Valve gives a refined ride on the street, and the adjustable damping and ride height give you control on track days. Many owners run softer settings on the road and add damping for the track.

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.

Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Login Close
Close
Shopping Cart
1 items

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Close
Edit Option
Close
Back In Stock Notification
this is just a warning