ND Miata Öhlins Coilovers: Road & Track Specs, Fitment and Price
Quick answer: ND Miata Öhlins coilovers means the Öhlins Road & Track kit, part number MAS MP00S1, for the 2016-2024 Mazda MX-5 Miata and the 2017-2024 MX-5 Miata RF. It uses Öhlins' Dual Flow Valve (DFV) dampers with one damping adjuster per corner, height-adjustable bodies, 70 N/mm front and 40 N/mm rear springs, and your factory top mounts. In its standard setting the car sits about 15 mm lower than stock. It's built for a Miata that's driven every day and taken to autocross or track days. At AutoTalent the kit is $2,700 at the time of writing.
Below we cover ND fitment by model year, what's in the kit, how DFV and the adjusters work, Öhlins' recommended settings, and how the ND kit compares with the Öhlins kits for the NA, NB and NC Miata.

ND Miata Öhlins Road and Track at a glance
| Öhlins part number | MAS MP00S1 (road setup) |
| US fitment | 2016-2024 MX-5 Miata (Sport, Club, Grand Touring); 2017-2024 MX-5 Miata RF (Club, Grand Touring); 2020 100th Anniversary editions |
| Damper technology | Dual Flow Valve (DFV), monotube, rebuildable |
| Damping adjustment | One adjuster per corner sets compression and rebound together; remote cable adjusters at the rear |
| Spring rates | 70 N/mm front (about 400 lb/in), 40 N/mm rear (about 228 lb/in) |
| Ride height | About 15 mm lower than stock in standard settings; roughly 5-30 mm lower range |
| Top mounts | Uses the original Mazda top mounts front and rear |
| Warranty | 2-year Öhlins limited warranty |
| AutoTalent price | $2,700 (at the time of writing) |
ND Miata fitment: which model years are covered
The ND kit covers every US-market ND we list it for: the soft-top MX-5 Miata from 2016 through 2024 in Sport, Club and Grand Touring trims, and the retractable-hardtop MX-5 Miata RF from 2017 through 2024 in Club and Grand Touring trims. The 2020 100th Anniversary Special Edition roadster and RF are covered too.
There's one kit for ND1 (2016-2018) and ND2 (2019-2024) cars. The 2019 update brought a higher-revving 2.0L engine, and AutoTalent's fitment for this kit covers both. Club models take the same Öhlins kit as Sport and Grand Touring cars. If you have a 2025 or newer Miata, call us before ordering and we'll confirm fitment for your exact car.
What you get in the Öhlins ND Miata kit
MAS MP00S1 is a complete four-corner coilover system: two front dampers (Öhlins MAS 5P00), two rear dampers (MAS 6P00), springs, spring seats, dust boots, the adjuster knobs, two C-spanners for setting preload, an owner's manual and a sticker kit. The rear dampers come with remote adjusters, a 280 mm cable and thumbwheel for each side, so you don't have to reach under the car to change rear damping.
Top mounts aren't included, and that's deliberate. The ND kit is designed around Mazda's original rubber-isolated top mounts, which keeps noise, vibration and harshness close to stock. That's a real advantage on a car you drive every day.

How DFV and the adjusters work on the ND
DFV, or Dual Flow Valve, is Öhlins' patented valving for its Road & Track dampers. On the ND kit, a single knob at each corner changes compression and rebound damping together. In practice that means one adjustment per corner instead of separate compression and rebound knobs, and Öhlins tunes the valving so the car stays composed over broken pavement while still controlling body roll when you push.
Ride height and spring preload are set independently. Öhlins sets the front springs with 10 mm of preload and the rears with 5 mm, and the height adjusters move the car 1.5 mm per full turn. That lets you lower the car or corner-balance it without changing how much the spring is compressed. For a broader look at DFV across other cars, see our Öhlins Road and Track coilovers guide.
Öhlins' recommended damper settings for the ND Miata
Öhlins publishes a simple starting point for MAS MP00S1. Clicks are counted from fully stiff, and the same ranges apply front and rear:
| Use | Damping (clicks from stiff) |
|---|---|
| Street | 10-20 |
| Winding road | 5-10 |
| Track | 2-7 |
A sensible approach is to start in the middle of the street range for daily driving, then add damping a few clicks at a time for a canyon run or a track session. Change one end at a time and note what you feel. If the rear feels nervous on corner exit, soften the rear or firm the front a click or two.
Road setup vs track-day springs
Öhlins offers the ND kit in two forms. MAS MP00S1, the kit AutoTalent sells, is the road setup with 70 N/mm front springs. MAS MP00S2 is Öhlins' track-day version with stiffer 100 N/mm front springs. For a Miata that's driven on the street and taken to autocross or the occasional track day, the road setup is the better match. A car that lives on sticky tires at the track is where the stiffer front springs earn their place.
Öhlins for every Miata: ND vs NC vs NA/NB
If you're searching for Miata Öhlins options beyond the ND, Öhlins builds a Road & Track kit for each US generation, and all three are $2,700 at AutoTalent at the time of writing. They differ in springs, ride height and top mounts:
| ND (MAS MP00S1) | NC (MAS MI30S1) | NA/NB (MAS MI20S1) | |
|---|---|---|---|
| US model years | 2016-2024 (RF 2017-2024) | 2006-2015 | 1990-1997, 1999-2005 |
| Spring rates (F/R) | 70 / 40 N/mm | 70 / 40 N/mm | 80 / 60 N/mm |
| Lowering in standard settings | About 15 mm | About 35 mm | About 20 mm |
| Top mounts | Original front and rear | Öhlins aluminum front, original rear | Öhlins aluminum front and rear |
| AutoTalent price | $2,700 | $2,700 | $2,700 |
NC owners can shop the Öhlins Road & Track kit for the 2006-2015 MX-5 Miata (NC), and NA and NB owners can shop the Öhlins Road & Track kit for the 1990-2005 Miata (NA/NB). There was no 1998 model-year Miata in the US, which is why that year is missing from the NA/NB fitment. To see Öhlins kits for other cars, browse our Öhlins coilovers collection.
Is the Öhlins kit worth it on an ND Miata?
The ND is light and softly sprung from the factory, so it rolls and pitches more than many owners want once they start driving it hard. The Öhlins kit tightens that up with more spring than stock and damping you can adjust in seconds, while the DFV valving and factory top mounts keep the car comfortable enough to drive every day. Because the dampers are rebuildable, you can have them serviced or revalved later instead of replacing the kit.
If your Miata only sees the street and you just want a lower stance, a cheaper height-adjustable kit may be enough. If you drive it to autocross or track days and home again, and you care about ride quality on the way, the Öhlins kit is built for exactly that. You can order the Öhlins Road & Track kit for the 2016-2024 ND Miata at AutoTalent.
ND Miata Öhlins coilovers FAQ
Do Öhlins Road and Track coilovers fit every ND Miata?
AutoTalent lists the Öhlins Road & Track kit (MAS MP00S1) for the 2016-2024 Mazda MX-5 Miata in Sport, Club and Grand Touring trims, the 2017-2024 MX-5 Miata RF in Club and Grand Touring trims, and the 2020 100th Anniversary editions. ND1 and ND2 cars use the same kit. For a 2025 or newer Miata, call us before you order so we can confirm fitment.
How much do ND Miata Öhlins coilovers cost?
The Öhlins Road & Track coilover system for the ND Miata is $2,700 at AutoTalent at the time of writing. The NC and NA/NB kits are also $2,700.
How low does an ND Miata sit on Öhlins Road and Track?
With the preload and height adjusters in their standard positions, Öhlins says the car sits about 15 mm lower than stock. The height adjusters move 1.5 mm per turn, and Öhlins quotes a range of roughly 5-30 mm lower than standard.
What spring rates come with the ND Miata Öhlins kit?
MAS MP00S1 uses 70 N/mm (about 400 lb/in) front springs and 40 N/mm (about 228 lb/in) rear springs. Öhlins sells a separate track-day version, MAS MP00S2, with 100 N/mm front springs. AutoTalent stocks the road-setup MP00S1.
Do I need new top mounts for Öhlins on an ND Miata?
No. The ND kit is designed to use the factory top mounts front and rear, which helps keep noise and harshness close to stock. That is different from the NA/NB kit, which includes aluminum top mounts at both ends.
Can I buy a single Öhlins damper for my ND Miata?
Yes. AutoTalent lists the ND front replacement damper and ND rear replacement damper separately at $720 each, at the time of writing.
Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.
