CONCERNS ABOUT FITMENT?

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg.. High Quality Clamps and Hi Temp Silicone...

BladeRunner 2-1/2 IN & 3 IN Aluminum Hot and Cold Charge Pipe Kit Red GM Colorado/Canyon 16-20 L4-2.8L (td) LWNThis Part Fits: Year Make Model Submodel 2016-2022 Chevrolet Colorado LT 2016-2022 Chevrolet Colorado WT 2016-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

aFe Powers Charge Pipes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

aFe Powers Charge Pipes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

aFe Powers Charge Pipes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

aFe Powers Charge Pipes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...

aFe Power's intercooler tubes are constructed from 2-1/2" (Hot Side) and 3" (Cold Side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The metallic blue powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The...

aFe Power's intercooler tubes are constructed from 2-1/2" (Hot Side) and 3" (Cold Side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The...

These couplings feature high temperature 5-Ply reinforced silicone material which meet or exceed SAEJ20 Standard. This Kit Fits aFe Intercooler Tubes 46-20254-B Or 46-20254-L Only 5-Ply Reinforced High Temp Silicone Couplings w/Clamps Set Coupler Hose Allows For Expansion/Movement/Vibration This Part Fits: Year Make Model...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2011-2013 BMW 335i (E9X) L6-3.0L (t) N55 engines, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the...

Reinforced Silicone: This intercooler hose is constructed from high temperature 5-Ply reinforced silicone material which meet or exceed SAEJ20 Standard. It uses built-in metal spiral insert to withstand extreme amounts of boost pressure while keeping from expanding. Durable Coupling: Allow for expansion, movement, and...

BladeRunner 2-1/2 to 3 IN Aluminum Cold Charge Pipe Black BMW 335i (F30) 12-15/ M235i (F22/23) 14-16 L6-3.0L (t) N55 A/T 2.5 in. Inlet/3 in. Outlet For Superior Strength and Durability No Cutting or Drilling On OEM Parts For Faster Installation Billet Aluminum Factory...

Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply polyester reinforced silicone hump coupling for strength. Mandrel-bent Tubing: Constructed of 2-1/2" to 3" mandrel-bent aluminum tubing then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandre l bends...

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection. 5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater...

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection. 5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater...

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2015 BMW 335i (F30) L6-3.0L (t) with the N55 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design,...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that...

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory fin core design, while...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

BladeRunner Aluminum Hot and Cold Charge Pipe Kit Black Ford F-150 15-19 V6-3.5L (tt)This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2016 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2016 Ford F-150...

This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows OE intercooler system by 15%! Multi-Ply Reinforced High Temp Silicone Allows For Expansion...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

BladeRunner 3 IN Aluminum Cold Charge Pipe Black Ford F-150 15-19 V6-2.7L (tt) Reduce Potential For Future Engine Damage Due To Cooler Failure Does Not Defeat Any Intended Emission Control Device/System All New Construction; Not A Repaired/Refurbished Unit Improved Direct-Flow Design Prevents Failures Increased...

BladeRunner 3 IN Aluminum Hot Charge Pipe Black Ford F-150 15-19 V6-2.7L (tt) Heavy-Duty 5-Ply Couplings Hassle-Free Installation Leak-Free Seal This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT

BladeRunner Aluminum Hot and Cold Charge Pipe Kit Black Ford F-150 15-19 V6-2.7L (tt)This Part Fits: Year Make Model Submodel 2015-2017 Ford F-150 Lariat 2015-2017 Ford F-150 XL 2015-2017 Ford F-150 XLT