CONCERNS ABOUT FITMENT?

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a aggressive sound. Muffler finish may vary. Finishing off this exhaust system is a 2-1/2...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This axle-back exhaust system is finished off with a hi-tuck tip that...

aFe's Twisted Steel headers outflow and outperform the Ford diesel factory exhaust manifolds for a true, bolt-on performance header system. These precision-designed, hand-crafted headers are mandrel-bent from 1-3/4" into 2" heavy duty gauge .120" wall, brushed finish 304 stainless steel tubing and are 100%...

This Transmission pan has an increased fluid capacity of approximately 4 quarts over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Transmission pan is compatible with factory...

This cover has an increased oil capacity over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. This cover incorporates a magnetic drain and deep reach fill plug...

Bolt on instant performance by upgrading or replacing your restrictive, cracked factory manifold with this BladeRunner port matched manifold. Designed to outflow the stock manifold by 12% for improved throttle response, the BladeRunner manifold has both the inlet and the outlet ports machined to...

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and...

The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber, resulting in increased performance and improved throttle response. The serrated/helix combination design also reduces intake whistle that occurs with helix-only designs (US PAT 07055513)....

The serrated/helix design (US PAT 07055513) creates turbulence in the intake manifold and increases air pressure in the combustion chamber for better performance. This unique entry design also reduces intake whistle that commonly occurs with other helix-only styles. The addition of a Silver Bullet...

BladeRunner 2-1/2 IN & 3 IN Aluminum Hot and Cold Charge Pipe Kit Black GM Colorado/Canyon 16-20 L4-2.8L (td) LWNThis Part Fits: Year Make Model Submodel 2016-2022 Chevrolet Colorado LT 2016-2022 Chevrolet Colorado WT 2016-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC...

BladeRunner 2-1/2 IN Aluminum Hot and Cold Charge Pipe Kit Red Ford Focus ST 13-18 L4-2.0L (t)This Part Fits: Year Make Model Submodel 2013-2014 Ford Focus S 2013-2014 Ford Focus SE 2013-2018 Ford Focus ST 2013-2014 Ford Focus Titanium

Anyone can make a stiff sway bar, at aFe Control we provide you the perfect balance of increased roll stiffness without upsetting the vehicles balance and traction control systems. Designed specifically with lightweight material this swaybar will transform the handling of your car and...

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding...

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding...

aFe is proud to introduce a?new OE replacement filter for the 2011-2014 Mercedes AMG CL63/E63/S63 V8-5.5L (t). Coming is pairs, these filters are offered in?two medias; Pro Dry S for maximum convenience, Pro 5R for maximum air flow. These filters will outflow the stock...

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding...

Constructed with 100-percent polyurethane on top and bottom, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent...

This intake system features a 7" tall conical air filter with five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

Constructed from rugged 3/16” & 1/4” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts offer convenient, secure recovery solutions, while light tabs are designed to fit a range of 6‑inch...

Designed to streamline the installation process of select aFe POWER intake systems, this extension harness allows for hassle-free relocation of the factory Mass Air Flow [MAF] sensor. Suitable for a wide range of projects or modifications that require the relocation of the factory MAF...

Dramatically reduce body roll without sacrificing ride quality with the aFe CONTROL rear sway bar. Our 2-way adjustable sway bar will allow you to easily dial in the handling balance of your Tacoma. Sharpened steering response will improve initial turn-in making your Toyota feel...

This aFe POWER 78mm Throttle Body improves engine air flow over the stock 74mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. This aFe POWER 78mm...

The BladeRunner intake heater relocation allows you to relocate the intake heater from the failure-prone factory location to in front of the intake manifold. This places the intake heater upstream of the EGR feed, avoiding EGR contamination of the intake heater. The factory grid...

The actuator requires no special timing of the turbocharger during installation, and coms with a plug and play calibration tool for VG calibration. This turbocharger actuator can be installed on 07.5-12 models with the included wire harness adapter. For 13-18 models, the harness adapter...

The compressor features an anodized 7+7 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. This turbocharger setup can be installed on 03-07 Ford F250/F350/F450/F550 Super...

The compressor features an anodized 11 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. This turbocharger setup can be installed on 11-16 Chevrolet Silverado 2500HD/3500HD...

Constructed from rugged 3/16” & 1/4” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts offer convenient, secure recovery solutions, while light tabs are designed to fit a range of 6‑inch...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires...