For any questions please PM or email: Online@AutoTalent.com Dinan Camber Plates for BMW 645ci / 650i 2004-2010 Dinan Camber Plates deliver enhanced cornering performance for most vehicles by adding -0.6 degrees of negative camber to the front wheels, leading to improved traction, sharper turn-in response, and a dramatic reduction in understeer. However, for the Z8 , they function as caster plates, relocating the upper strut mounting position to provide +0.5 degrees of caster. This unique setup still induces negative camber in turns, further enhancing grip and responsiveness. Features: Additional -0.6 degrees of camber (except Z8). Additional +0.5 degrees of caster (Z8 only). Decreased understeer , improving handling and cornering agility. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 3 Labor Time (Hours) 3.5 Length 6 Product Type Camber Plates Weight 6 Width 6 UPC 813725020488 Part Number D160-0390   Fitment Chart: Make Model Year BMW 645ci 2004-2005 BMW 650i 2006-2010

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW F22 230i 2017-2021 Dinan engineers crafted the BMW F22 230i Free Flow Axle-Back Exhaust to enhance exhaust flow, reducing back pressure and improving power output while delivering a sporty, aggressive sound under hard acceleration. This exhaust system strikes the perfect balance between a refined tone during regular driving and a more assertive, throaty note when pushed harder. To maintain cabin comfort, Dinan integrated drone abatement technologies to minimize low-RPM resonance, allowing for an intimate driving experience without excessive cabin noise. Designed for easy installation, the exhaust system utilizes a simple bolt-on setup with mounting hardware included. It’s constructed from 16-gauge 304 stainless steel , ensuring durability and long-term corrosion resistance. The system is available with twin 3" ceramic black or polished exhaust tips , laser engraved for a sleek, high-performance look. The exhaust yields a modest but noticeable performance increase, with up to 4 horsepower and 3 ft-lbs of torque gained at 6600 RPM. Notably, the factory computer-controlled exhaust valve is eliminated with this system, simplifying the design while maintaining a sporty sound profile throughout the rev range. Key Features: Power Gains: +4 HP and +3 lb-ft @ 6600 RPM Sound Profile: Louder, sportier, and more aggressive without excessive drone Exhaust Tips: Twin 76mm (3") polished or ceramic black laser-engraved tips Construction: 100% 304 stainless steel, resistant to corrosion Installation: Utilizes factory brackets and hangers for a seamless, factory-like fitment Valve Removal: Eliminates the factory computer-controlled exhaust valve for a streamlined design Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.3 Length 48 Max HP Gain 4 @ 6600 RPM Max Torque (lb-ft) Gain 3 @ 6600 RPM Product Type Axle-Back Exhaust Tip Finish Black Ceramic Coated Weight 51 Width 30 UPC 813725024684 Part Number D660-0076-BLK Fitment Chart: Make Model Year BMW  F22 230i  2017-2021

For any questions please PM or email: Online@AutoTalent.com Dinan 19-Inch Lightweight Forged Black GA1R Wheel Set for BMW M3 E9X 2008-2013 Reducing unsprung weight and improving your BMW's grip on the road is what the Lightweight Performance Wheel Set is all about. These wheels are built to Dinan offsets and sizes to accommodate substantially larger tires without any rubbing or modification of the wheel well. Each wheel is cut from a single solid block of aluminum, creating a very strong wheel that is also light in weight. The design not only offers superior performance but also great looks, making it a standout choice. Front recommended tire: Michelin Pilot Super Sport - 275/30-19. Rear recommended tire: Michelin Pilot Super Sport - 295/30-19. Features: Built to Dinan-optimized offsets and sizes (Front: 19" x 9"; Rear: 19" x 10") Lightweight (Front: 20 lbs; Rear: 21 lbs) Accommodates substantially larger tires for maximum grip and reduction of understeer by bringing the front and rear tire sizes closer together Motorsport-inspired design for the ultimate in street performance Aerospace-grade 6061-T6 forged aluminum for high strength-to-weight ratio Engineered to minimize unsprung mass and rotational inertia for maximum performance and handling CNC machined from a solid piece of aluminum Extreme stiffness and fatigue strength 2100 lb. Street-Tire Load Rating (per wheel) OE TPMS and lug hardware compatible for ease of installation Dinan center caps included Brand Dinan Dinan Point Value 3 Emission Code 5 Height 60 Length 25 Product Type Forged Wheels Weight 126 Width 25 UPC 813725026206 Part Number D750-0063-GA1R-BLK Fitment Chart: MAKE MODEL CHASIS YEAR BMW M3 E90/E92/E93 2008-2013

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Dual Core Intercooler for BMW M235i 2014-2016  Instructions for Part# D330-0021 The Dinan Dual Core Intercooler is engineered for high-performance applications, providing substantial power gains while ensuring reliable operation under various driving conditions. Its innovative design offers significant improvements in cooling efficiency and thermal management, making it a vital upgrade for enthusiasts seeking to maximize their vehicle's potential. Key Features Increased Cooling Efficiency : The intercooler boasts a 240% increase in face area compared to the stock setup, allowing for significantly enhanced heat exchange and reduced charge air temperatures, which helps prevent heat soak. Improved Pressure Drop : With a charge air pressure drop of only 0.8 psi , the intercooler provides a 25% improvement over stock, contributing to more efficient engine performance. Optimal Thermal Management : The system features a 155º F charge air temperature drop , reflecting an 11% improvement over stock, ensuring that the engine can maintain higher performance levels without overheating. Enhanced Delta Efficiency : A notable improvement in the charge air temperature to ambient temperature delta of 18º F at 6250 RPM results in a 60% improvement compared to the factory intercooler, leading to more consistent power output. Dual-Core Design : Dinan's unique dual-core design allows both cores to operate simultaneously, maximizing cooling capacity and efficiency, which helps reduce "cool down" time and maintain full power during demanding driving conditions. Power Gains : On vehicles equipped with the N55 engine , users can expect maximum gains of 15 HP and 13 lb-ft of torque at 6250 RPM . For the N20/N26 engines , gains of 6 HP and 5 lb-ft of torque can be realized at 5500 RPM . Compatibility with Tuning : To achieve the best performance, pairing the intercooler with engine tuning (like Dinan's flash software) is recommended. This combination extends the power band, resulting in a more robust output from 5000 RPM to redline , compared to stock gains primarily seen at 6000 RPM and above . Easy Installation : The intercooler is designed as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like fit. Emissions Compliance : The system is 50 State Emissions Legal , with a CARB EO number of D-176-51 , ensuring that performance upgrades do not compromise regulatory compliance. Brand Dinan Dinan Point Value 2 Emission Code 1 Height 13 Labor Time (Hours) 4.5 Length 36 Max HP Gain 15 @ 6250 RPM Max Torque (lb-ft) Gain 13 @ 6250 RPM Product Type Intercooler Sale Category Forced Induction Weight 33 Width 19 UPC 813725022895 Part Number D330-0021   Emissions This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles 1968 and newer U.S. manufactured Federally Certified vehicles 1968 and newer Foreign manufactured vehicle Fitment Chart: Make Model Year BMW M235i 2014-2016 BMW M235i xDrive 2015-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Polished Tips for BMW  325i / 330i ( E46 ) 2001-2006 The Dinan Free Flow Axle-Back Exhaust for 3 Series models delivers improved exhaust flow, resulting in power gains while maintaining a balanced, refined sound. Below is a detailed breakdown of the key features: Key Features: Performance Gains: Power Increase: +5 HP @ 6500 RPM +4 LB-FT @ 6500 RPM (with software) Tuned Resonance Chamber Technology: This ensures an ideal balance between enhanced power and a sporty, yet civilized, exhaust note. The system avoids excessive noise, making it suitable for everyday driving. Weight Reduction: The Dinan exhaust is significantly lighter than the stock system, weighing 17 lbs compared to the 28 lbs of the stock exhaust, resulting in an 11-lb weight reduction . Durable Construction: Built from 20 gauge 304 stainless steel , the exhaust system provides excellent corrosion resistance, ensuring durability and longevity. Aesthetic Design: Features dual 2.5-inch polished stainless steel tips , laser engraved with the Dinan logo, giving the car a sleek and performance-oriented appearance. Drone Abatement Technologies: These technologies minimize cabin resonance, ensuring a comfortable driving experience without unwanted exhaust drone at low RPMs. Factory-Like Fitment: The system uses factory brackets and hangers for a precise, easy installation, ensuring a clean fit without the need for modifications. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.5 Length 48 Max HP Gain 5 @ 6500 RPM Max Torque (lb-ft) Gain 4 @ 6500 RPM Product Type Axle-Back Exhaust Weight 39.3 Width 30 UPC 813725021928 Part Number D660-4602 Fitment Chart: Make Model Year BMW 325i 2001-2005 BMW 325ci 2001-2006 BMW 325xi 2001-2005 BMW 330i 2001-2005 BMW 330ci 2001-2006 BMW 330xi 2001-2006

Dinan Supplemental Ride Quality Handling Kit - BMW M550i G30 2018-2021 DESCRIPTION: To fully enjoy Dinan performance spring sets we highly recommend pairing them up with our supplemental ride quality and handling kits. This additional kit includes tuned, progressive rate bump stops that maximize suspension travel on the lowered car for improved handling capabilities and ride quality when compared to just a spring set. By allowing for full compression travel within the spring the possibility of a sudden "bottoming out" is negated, a common unwanted side effect when lowering a vehicle. Bump stops also have the added benefit of optimizing the spring rate rewarding those that use them with added mechanical grip and cornering power. Simply put, the Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets. NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car's improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. SPECS: Included Notes 2 front bump stops Required Items Highly Recommended: D100-0932 - Performance Spring Set for BMW G30 M550i (see product description for details. VEHICLE FITMENT: 2018-2023 M550i G30 NOTE: Images are for representation purpose only and may differ depending on application.

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Polished Tips for BMW 330i / 430i 2016-2020 Special Note:   Has not yet been tested with the M-aerodynamic rear bumper so fitment is not guaranteed on that application. Dinan's Free Flow Axle-Back Exhaust System for the BMW 330i/430i is designed to enhance performance by reducing back pressure, which increases exhaust flow and results in +4 HP and +3 lb-ft of torque at 6600 RPM . This exhaust system provides a sporty sound that is aggressive under hard acceleration but remains civilized for daily driving. Drone abatement technology ensures minimal cabin resonance, making it ideal for those who want a high-performance sound without intrusive noise. The system features a simple bolt-on installation using the factory hangers and mounting hardware. It is constructed from 100% 16-gauge 304 stainless steel , which resists corrosion for long-term durability. The exhaust gases exit through twin 3" (76mm) polished or ceramic black laser-engraved tips , offering a sleek, high-performance aesthetic. Key Features: Power Gains: +4 HP and +3 lb-ft of torque at 6600 RPM Drone Reduction: Abatement technology reduces low-RPM cabin resonance Sound Profile: Louder, sportier sound under acceleration Exhaust Tips: Twin 3" (76mm) polished or ceramic black, laser-engraved tips Material: 100% 16-gauge 304 stainless steel construction for corrosion resistance Installation: Bolt-on design, using factory brackets and hangers for easy installation Exhaust Valve: Factory computer-controlled valve is eliminated for consistent tone Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.3 Length 48 Max HP Gain 4 @ 6600 RPM Max Torque (lb-ft) Gain 3 @ 6600 RPM Product Type Axle-Back Exhaust Tip Finish Polished Weight 51 Width 30 UPC 813725024585 Part Number D660-0069   Fitment Chart: Make Model Year BMW 330i 2017-2018 BMW 330i xDrive 2017-2019 BMW 430i 2017-2020 BMW 430i Gran Coupe 2017-2020 BMW 430i xDrive 2017-2020 BMW 430i xDrive Gran Coupe 2017-2020

For any questions please PM or email: Online@AutoTalent.com Dinan Tension Strut Ball Joint Kit for BMW M5 / M8 2018-2025 Instructions for Part# D280-0019 The Dinan Tension Strut Ball Joint Kit pays homage to the classic BMW M experience, designed to bring back the authentic road feel that many driving enthusiasts crave. With the decline of pure road feedback in modern suspensions, this kit revives that visceral connection to the pavement, reminiscent of BMW’s road racing heritage. Dinan's expertise in precision suspension components ensures that this kit doesn’t just restore road feel; it enhances it, making your BMW’s handling sharper and more responsive without sacrificing daily drivability. By replacing the stock rubber bushings in the thrust arms with precision ball joints housed in durable, machined aluminum, the Dinan kit virtually eliminates the deflection seen in stock bushings. This provides a direct and responsive feel while reducing brake shimmy for a smoother, more confident driving experience. These sealed, nylon-lined bearings are the quietest in the market, delivering performance while keeping noise at bay, ideal for both spirited drives and everyday commutes. Key Features: Enhanced Steering Precision : Improves road feel by reducing bushing deflection. Brake Shimmy Reduction : Creates a more stable braking response. Quiet, Nylon-Lined Bearings : Designed for minimal noise and long-term durability. Machined Aluminum Housings : Precision-built for strength and stability. Sealed Bearings with Rubber Boot : Protects against dirt and road grime for extended longevity. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 4 Labor Time (Hours) 4 Length 14 Product Type Monoballs Weight 5 Width 12 UPC 813725025094 Part Number D280-0019   Fitment Chart: Make Model Year BMW M5 2018-2023 BMW M8 2020-2025

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M3 Sedan ( E90 ) 2008-2011 Special Note:   This fits the M3 Sedan only. Dinan, the top research company in the BMW aftermarket, has a proven legacy of performance, having powered back-to-back Rolex Series Daytona Prototype racing championships from 2010 to 2012 and winning the prestigious 24 Hours of Daytona in 2013 with Chip Ganassi Racing. This excellence is the foundation of Dinan’s Free Flow Axle-Back Exhaust systems, where cutting-edge technology is brought directly to BMW owners who value both performance and refinement. Dinan’s Free Flow Axle-Back Exhaust is designed to optimize flow and sound without compromising on either. The Helmholtz chamber , a key feature, reduces the drone that commonly affects aftermarket exhausts at low throttle, making for a quieter, more refined driving experience. The exhaust also features a straight-through single pipe design that further reduces noise during light throttle while delivering a sportier and more aggressive exhaust note at wide-open throttle. In addition to improving performance, Dinan's exhaust is built for durability and weight savings. Constructed from 100% 20-gauge 304 stainless steel , this system is lighter than stock by 10 pounds , which contributes to better overall vehicle dynamics. The system features quad 3" black ceramic-coated tips that are laser-engraved for a sleek look, perfectly complementing the BMW’s aesthetic. Dinan’s approach to performance without sacrificing everyday drivability is a testament to its focus on maintaining BMW’s hallmark refinement. Key Features: Increased Power: +6 HP and +5 lb-ft @ 6800 RPM Helmholtz Chamber: Reduces drone at light throttle, ensuring a quiet cabin experience Straight-Through Design: Enhances flow and performance while minimizing noise at low throttle Sporty Sound: Enjoyably louder and more aggressive at wide-open throttle Quad 3" Exhaust Tips: Black ceramic-coated and laser engraved for a premium appearance Weight Savings: 10 lbs lighter than the stock exhaust system Durable Build: Made from 100% 20-gauge 304 stainless steel to resist corrosion Seamless Fitment: Uses factory brackets and hangers for easy installation Warranty: Includes a 4-year/50,000-mile new car factory matching warranty—double the warranty offered by most competitors Brand Dinan Dinan Point Value 3 Emission Code 5 Height 15 Labor Time (Hours) 1.6 Length 63 Max HP Gain 6 @ 6800 RPM Max Torque (lb-ft) Gain 5 @ 6800 RPM Product Type Axle-Back Exhaust Weight 72 Width 18 UPC 813725021614 Part Number D660-0028   Fitment Chart: Make Model Year BMW  M3 (E90)  2008-2011

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M235I ( F22 ) 2014-2016 Special Note:   For vehicles WITHOUT the M-Performance rear valance Dinan engineers have developed the Free Flow Axle-Back Exhaust for the F22 BMW M235i to enhance exhaust flow by minimizing back pressure, resulting in an increase in power output and delivering a sporty sound that is both refined at lower speeds and aggressive under hard acceleration. The system incorporates a Helmholtz chamber design , which significantly reduces unwanted resonance, or "drone," at lower RPMs, ensuring a more comfortable cabin experience. Constructed from 100% 16-gauge 304 stainless steel , the exhaust is built to exact specifications for a precise fit, utilizing the factory hangers. This durable construction guarantees corrosion resistance and long-lasting performance. The system also features twin 89mm (3.5") laser-engraved tips , available in polished stainless or ceramic black, providing a tasteful and high-performance appearance . Features: More Power: +6 HP @ 6600 RPM, +5 lb-ft @ 6600 RPM Helmholtz Chamber: Designed to eliminate drone Sporty Sound: Louder, more aggressive tone under acceleration Twin 89mm Tips: Available in polished stainless or ceramic black, laser-engraved Durable Construction: 100% 304 stainless steel for corrosion resistance Easy Fitment: Uses factory brackets and hangers for seamless installation Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.3 Length 50 Max HP Gain 6 Max Torque (lb-ft) Gain 5 Product Type Axle-Back Exhaust Sale Category Exhaust Weight 47 Width 34 UPC 813725021799 Part Number D660-0047-BLK   Fitment Chart: Make Model Year BMW M235I (F22) 2014-2016

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System for BMW 328i / 428i 2012-2016 Dinan engineers have meticulously designed the BMW 328i/428i Free Flow Axle-Back Exhaust to enhance exhaust flow and reduce back pressure, resulting in increased power output and a sporty sound profile that strikes a perfect balance. The system delivers a civilized tone during regular driving but transforms into a pleasantly aggressive roar under hard acceleration. With a focus on driver experience, Dinan's advanced drone abatement technologies significantly minimize low-RPM drone, ensuring a refined cabin environment without excessive noise. Constructed from 100% 16-gauge 304 stainless steel , this exhaust system is built for durability and resistance to corrosion, promising longevity and performance. The design incorporates twin 70mm (2.75") exhaust tips, available in polished or ceramic black finishes, each laser engraved for a sophisticated high-performance appearance. The installation process is straightforward, using the factory brackets and hangers for a seamless fit. Notably, the factory computer-controlled exhaust valve is eliminated, enhancing the system's efficiency. This exhaust offers a maximum performance gain of 4 horsepower and 3 lb-ft of torque at 6600 RPM , providing an exciting upgrade for your BMW. Key Features: Power Gain: +4 HP and +3 lb-ft of torque @ 6600 RPM Sound Profile: Enjoyably louder and sportier with minimized low-RPM drone Exhaust Tips: Twin 70mm (2.75") laser engraved tips in polished or ceramic black Construction: 100% 304 stainless steel for corrosion resistance Installation: Simple bolt-on with factory brackets for a factory-like fitment Valving: Eliminates the factory computer-controlled exhaust valve for improved efficiency Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.3 Length 48 Max HP Gain 4 @ 6600 RPM Max Torque (lb-ft) Gain 3 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 51 Width 30 UPC 813725021775 Part Number D660-0046-BLK Fitment Chart: MAKE MODEL YEAR BMW 328i 2012-2016 BMW 328i xDrive 2013-2016 BMW 428i 2014-2016 BMW 428i xDrive 2014-2016

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW 335i / 435i 2012-2016  Special Note:   Factory computer-controlled exhaust valve is eliminated. Dinan engineers developed the Free Flow Axle-Back Exhaust for the F30 335i and F32 435i to enhance exhaust flow by reducing back pressure, which results in increased power output and a sporty, refined sound . The exhaust is designed to maintain a civilized tone during normal driving, yet deliver a pleasantly aggressive note under hard acceleration. Dinan's use of a Helmholtz chamber helps to reduce unwanted resonance, or "drone," at lower RPMs for a more enjoyable driving experience. Constructed from 100% 16-gauge 304 stainless steel , this system is corrosion-resistant and built to last. The exhaust features twin 3.5" laser-engraved exhaust tips available in either polished stainless or ceramic black , giving the car a tasteful and high-performance aesthetic. The factory computer-controlled exhaust valve has been eliminated to provide a more consistent exhaust sound. Features: More Power: +6 HP at 6600 RPM, +5 LB-FT at 6600 RPM Helmholtz Chamber: Reduces drone for a quieter ride at low RPM Sporty Sound: Louder, more aggressive sound under acceleration Twin 3.5" Tips: Available in polished stainless or ceramic black finishes, laser engraved for durability Durable Construction: Made from 100% 304 stainless steel for long-term corrosion resistance Factory Fit: Uses OEM brackets and hangers for seamless installation Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.3 Length 48 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 45.5 Width 30 UPC 813725021751 Part Number D660-0045-BLK Fitment Chart: Make Model Year BMW 335i 2012-2015 BMW 435i 2014-2016

PLEASE CALL OR TEXT (310)231-0292 WITH ANY QUESTIONS Dinan Racing Toe links | BMW 1M / M3 2008-2013 DESCRIPTION FEATURES VEHICLE FITMENT Dinan Racing Toe Links is the best toe for your BMW 1M E82, BMW M3 E90, BMW E92 M3 & BMW M3 E93 2008-2013. Are you looking for the best racing toe links for your BMW E82 1M & BMW M3 E90, BMW E92 M3? Rear Racing Toe links are the best air kit for your BMW E82 & BMW E9X model. Dinan's high-performance Racing Rear Toe Links add precision and predictability at the limit. The stock rear toe link is built with rubber bushings and a curved foraged alloy rod which is designed to flex. During hard acceleration this flex allows the rear wheels to have excessive toe change under hard acceleration and braking. All of this flex in the stock toe link causes the car to be unstable. Dinan stops the flex by replacing the rubber bushings with Teflon coated machined steel rod ends and the OEM curved bar with a straight billet aluminum rod, thus adding stability. The Dinan rear toe link also incorporates a hex nut shaped center to aid in the necessary fine adjustment of the toe link that is tough to achieve using the stock link. While functionally the renewed E39 M5 AMM's are identical to their successors, the re-released units are cosmetically different. The original release bore no branding for a stealth/OEM look whereas these feature the outlined Dinan logo that was popularized from the E39 540i AMM. This oft-requested adjustment should please most while also allowing the purists to be able to tell the difference between an original unit and the later release. Specification: BRAND :   Dinan DINAN POINT VALUE  :    3 EMISSION CODE  :   5 HEIGHT  :   5 LABOUR TIME (Hours) :   1.4 LENGTH :   16 PRODUCT TYPE :   Link Kit WEIGHT :   5 WIDTH :   5 WIDTH :   4 UPC :   813725023205 PART NUMBER :   R280-0006 EMISSIONS: This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles 1968 and newer U.S. manufactured Federally Certified vehicles 1968 and newer Foreign manufactured vehicle Dramatically Improved Predictability At The Limit Greater Stability Teflon Coated Fine Adjustment Highly Recommended For Use With Larger Wheels & Tires MAKE MODEL CHASIS ENGINE YEAR BMW 1M E82 - 2008-2013 BMW M3 E9X - 2008-2013 /* New Product Tab Functions */ function openTab(evt, TabName) { var i, tabcontent, tablinks; tabcontent = document.getElementsByClassName("tabcontent"); for (i = 0; i

For any questions please PM or email: Online@AutoTalent.com Dinan Anti-Roll Bar Set for BMW 428i / 430i / 435i / 440i 2014-2020 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars for both the front and rear are designed to significantly reduce body roll, improve grip, and increase stability, all while saving weight. These anti-roll bars are precision-tuned for each BMW chassis and allow for a range of stiffness adjustments to meet your driving needs. They are ideal for those looking to improve handling and mechanical grip without sacrificing comfort, providing a more planted and confident driving experience. Front Anti-Roll Bar Features: Size: 28mm (compared to stock sizes ranging from 21.2mm to 24.2mm) Adjustable from 45% to 97% stiffer than the stock bar, depending on the application 3 adjustment positions for fine-tuning Tubular construction for reduced weight Designed to work with stock BMW end links Rear Anti-Roll Bar Features: Size: 19mm (compared to stock sizes ranging from 12mm to 15mm) Adjustable from 84% to 474% stiffer than the stock bar, depending on the application 3 adjustment positions for easy tuning Tubular construction for weight savings Compatible with stock BMW end links General Benefits: Reduces body roll for enhanced cornering Increases mechanical grip and stability at the limit Improves handling without compromising ride quality Allows for customization of suspension stiffness to match driving style   Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 7.1 Length 40 Product Type Sway Bar Weight 30 Width 10 UPC 813725022765 Part Number D120-0585   Fitment Chart: MAKE MODEL YEAR BMW 428i 2014-2016 BMW 428i Gran Coupe 2015-2016 BMW 430i 2017-2020 BMW 430i Gran Coupe 2017-2020 BMW 435i 2014-2016 BMW 435i Gran Coupe 2015-2016 BMW 440i 2017-2020 BMW 440i Gran Coupe 2017-2020

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System for BMW 750i (G11/G12) 2016-2019 Dinan's Free Flow Axle-Back Exhaust System for the BMW 750i is designed to improve performance by increasing exhaust flow and reducing back pressure, which leads to gains of +8 HP and +6 lb-ft of torque at 6600 RPM . This system delivers a sporty, aggressive sound under hard acceleration while remaining civilized for daily driving. The exhaust's computer-controlled valves retain the factory functionality, limiting noise during low-speed driving and opening fully under high-load conditions to enhance performance and sound. One of the standout features of this system is the Helmholtz chamber design, which helps to reduce low-RPM drone , ensuring a quiet cabin experience even with the enhanced sound profile. The system has a stealthy design , as it utilizes the stock rear bumper cutouts without aftermarket exhaust tips, maintaining the elegant styling of the luxury sedan. Constructed from 100% 16-gauge 304 stainless steel , the exhaust system is designed for long-term durability and corrosion resistance. The system is also easy to install , thanks to a bolt-on design that uses the factory hangers and includes mounting hardware for a seamless fit. Key Features: Power Gains: +8 HP and +6 lb-ft of torque at 6600 RPM Drone Reduction: Incorporates Helmholtz chamber for reduced cabin resonance Sound Profile: Louder, sportier sound with computer-controlled valves for refined noise control Stealth Design: Exhaust exits through stock cutouts, preserving the sedan’s elegant appearance Material: 100% 304 stainless steel construction for durability and corrosion resistance Installation: Simple bolt-on design with included mounting hardware, using factory brackets and hangers Brand Dinan Dinan Point Value 3 Emission Code 5 Height 16 Labor Time (Hours) 2.6 Length 66 Max HP Gain 8 @ 6600 RPM Max Torque (lb-ft) Gain 6 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Weight 60 Width 30 UPC 813725024622 Part Number D660-0072 Fitment Chart: Make Model Year BMW 750i 2016-2019 BMW 750i xDrive 2016-2019 BMW 750Li xDrive 2016-2019