CONCERNS ABOUT FITMENT?

This Takeda cat-back exhaust system delivers. Constructed out of mandrel bent stainless steel tubing and a high flow muffler, this system offes maximum flow. Incorporating a factory style exhaust valve to control the exhaust note and perfromance, this smooth tone and responsive performance comes...

Add power, sound and style with aFe's Takeda 3" to 2-1/2" cat-back exhaust system. 304 stainless steel, mandrel bent tubing improves exhaust flow and delivers up to +10 HP and +11 lbs. x ft. torque. 100% hand TIG-welded for race proven strength and durability...

Add power, sound and style with aFe's Takeda 3" to 2-1/2" cat-back exhaust system. 304 stainless steel, mandrel bent tubing improves exhaust flow and delivers up to +10 HP and +11 lbs. x ft. torque. 100% hand TIG-welded for race proven strength and durability...

This Takeda cat-back exhaust system delivers. Constructed out of mandrel bent stainless steel tubing and a high flow muffler, this system offes maximum flow. Incorporating a factory style exhaust valve to control the exhaust note and perfromance, this smooth tone and responsive performance comes...

Tune up and dress up your Honda Civic Si Sedan with L4-1.5L (t) engine with the Takeda 3" to 2-1/2" 304 cat-back exhaust with dual carbon fiber tips. This system utilizes 3" to 2-1/2" mandrel bent, 304 stainless steel tubing to improve exhaust flow...

Unleash performance gains of up to +10 HP and +11 lbs. x ft. torque with aFe's Takeda 3"-2 ½" mandrel bent, 304 stainless steel cat-back exhaust system for your Honda Civic Si Coupe with L4-1.5L (t) engine. This exhaust system is 100% hand TIG-welded...

Performance Gains: This system produced gains of up to +6 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent, brushed finished 304 stainless...

Performance Gains: This system produced gains of up to +6 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent, brushed finished 304 stainless...

Performance Gains: This system produced gains of up to +6 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent, brushed finished 304 stainless...

Performance Gains: This system produced gains of up to +6 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno.3" - 2-1/2" 304 Stainless Steel Construction: This cat-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent, brushed finished 304 stainless...

Unleash performance gains of up to +10 HP and +11 lbs. x ft. torque with aFe's Takeda 3"-2 ½" mandrel bent, 304 stainless steel cat-back exhaust system for your Honda Civic Si Sedan with I4-1.5L (t) engine. This exhaust system is 100% hand TIG-welded...

Even the latest-model sport compact vehicles have room for improvement and is why aFe POWER Takeda stainless steel cat-back exhaust system for the Honda Civic Type R L4-2.0L (t) engine is here to turn it up. In-house testing shows this Takeda exhaust system delivered...

Unleash the full power and sound potential with aFe POWER Takeda stainless steel cat-back exhaust system. 304 stainless steel tubing and dual free-flowing mufflers increased performance flow and delivered gains of up to +19 HP/ +20 lbs. x ft. TQ! 100% hand TIG-welded, this...

aFe's Takeda stainless steel cat-back exhaust system brings the power and sound to the Honda Civic Si Coupe with L4-1.5L (t) engine. Constructed from 3" to 2-1/2" mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +10 HP and +11...

This Takeda cat-back exhaust system delivers. Constructed out of mandrel bent stainless steel tubing and a high flow muffler, this system offes maximum flow. Incorporating a factory style exhaust valve to control the exhaust note and perfromance, this smooth tone and responsive performance comes...

Unleash the full power and sound potential from your Honda Type-R with aFe POWER Takeda stainless steel cat-back exhaust system. 304 stainless steel tubing and dual free-flowing mufflers increased performance flow and delivered gains of up to +19 HP/ +20 lbs. x ft. TQ!...

Unleash the full power and sound potential from your Honda Type-R with aFe POWER Takeda stainless steel cat-back exhaust system. 304 stainless steel tubing and dual free-flowing mufflers increased performance flow and delivered gains of up to +19 HP/ +20 lbs. x ft. TQ!...

Performance Gains: This system produced gains of up to +11 HP and +10 lbs. x Ft. TQ., as measured on our in-house dyno (tested with PN 49-37011 exhaust). 3" 304 Stainless Steel Construction: This mid-pipe is constructed of 3" mandrel-bent 304 stainless steel tubing...

Replace the restrictive factory mid-pipe with the aFe POWER Takeda free-flowing mid-pipe. Constructed from mandrel bent stainless steel tubing this mid-pipe creates a noticeable performance gain and improved tone. Cutting is required to remove the OE system, see instruction sheet for cut locations. Constructed...

This mid-pipe is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flanges this system is a direct bolt-on system, which requires no...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered...

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered...

The Scorpion Aluminized Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response....

aFe is proud to introduce an all new Takeda dual cat-back exhaust system for the 2015-2020 Subaru WRX and WRX STI with the H4-2.0L/2.5L (t) engines. This performance cat-back exhaust system is constructed out of 3" into dual 2-1/4" mandrel-bent 304 stainless steel tubing...

Performance Gains: This system produced gains of up to +8 HP and +8 lbs. x Ft. TQ., as measured on our in-house dyno. 3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel...

Performance Gains: This system produced gains of up to +8 HP and +8 lbs. x Ft. TQ., as measured on our in-house dyno. 3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel...

Performance Gains: This system produced gains of up to +8 HP and +8 lbs. x Ft. TQ., as measured on our in-house dyno. 3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel...

Performance Gains: This system produced gains of up to +8 HP and +8 lbs. x Ft. TQ., as measured on our in-house dyno. 3" - 2-1/2" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent 304 stainless steel...

Add power and sound to your Elantra GT Sport with this Takeda axle-back exhaust sytem. The 100% hand MIG-welded, mandrel-bent, stainless steel tubing provides a smooth flowing exhaust that increases performance and a echoes a crisp tuned sound. The system is finished off with...

Achieve performance gains of up to +17 HP and +20 lbs. x ft. torque with aFe's Takeda 3"-2 ½" mandrel bent, brushed finish 304 stainless steel cat-back exhaust system for your 2008-2015 Evo X. Dual, high-flow 304 stainless steel mufflers improve performance across the...