CONCERNS ABOUT FITMENT?

This transmission pan has an increased fluid capacity of approximately 2 quarts over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. The black powder coat on the...

This transmission pan has an increased fluid capacity of approximately 2 quarts over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. Transmission pan is compatible with factory...

Enhance your Subaru Outback's capabilities with the Terra Guard Trail Bumper! Crafted from robust tubular steel, this heavy-duty front bumper guard ensures maximum protection and off-road utility. Integrated recovery shackle mounts offer added safety for any off-road adventure. Illuminate your path with up to...

Flow and Performance: This Large Bore-HD exhaust system is 100% hand MIG-welded and Constructed from 4" mandrel-bent 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. A mitered merge collector is also...

This aFe POWER 85mm Throttle Body improves engine air flow over the stock 82mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. This aFe POWER 85mm...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Performance Gains: This system produced gains of up to +8 horsepower and +9 lbs. x ft. torque, as measured on our in-house dyno. 3" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength...

Performance Gains: This system produced gains of up to +8 horsepower and +9 lbs. x ft. torque, as measured on our in-house dyno. 3" 304 Stainless Steel Construction: This axle-back exhaust system is constructed of 3" mandrel-bent 304 stainless steel tubing for maximum strength...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

The new ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4-inch aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free...

aFe EGR coolers are constructed from new stainless steel components. All connections are welded, not brazed, to improve reliability. This cooler features 6 thick-wall heat exchanger tubes. These tubes are resistant to clogging, extending the life of the cooler. Our available complete gasket kit...

No Core Charge! No Core Exchange!: aFe Power is proud to introduce a direct replacement EGR Cooler kit for 2008-2010 V8-6.4L turbo diesel Ford Power Stroke trucks. This EGR Cooler kit includes one horizontal and one vertical EGR cooler. This EGR Cooler is a...

No Core Charge! No Core Exchange!: aFe Power is proud to introduce the horizontal direct replacement EGR Cooler for 2008-2010 V8-6.4L turbo diesel Ford Power Stroke trucks. This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes a thicker wall to...

No Core Charge! No Core Exchange!: aFe Power is proud to introduce the vertical direct replacement EGR Cooler for 2008-2010 V8-6.4L turbo diesel Ford Power Stroke trucks. This EGR Cooler is a 100% new unit, not remanufactured. The cooler utilizes a thicker wall to...

The compressor features an anodized 7+7 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. This turbocharger setup can be installed on 03-07 Ford F250/F350/F450/F550 Super...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

The BladeRunner turbocharger is constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge. This turbocharger utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation. The turbocharger...

The compressor features an anodized 11 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. This turbocharger setup can be installed on 11-16 Chevrolet Silverado 2500HD/3500HD...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

The BladeRunner turbocharger is constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge. This turbocharger utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation. The turbocharger...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

aFe Power introduces an all new BladeRunner GT Series Wastegate Actuator upgrade for Ford Diesel Trucks 99.5-03 with V8-7.3L (td) engine. The GT Series wastegate actuator is constructed out of light weight black anodized CNC 6061 billet aluminum for maximum strength and style, with...

Introducing the all new aFe Power BladeRunner Wastegate Actuator for the Dodge Diesel Trucks 94-98 L6-5.9L (td). Constructed out of coated black stamped steel for maximum strength and style, with locking jam nut for precise boost pressure settings. These units come preset to factory...

Introducing the all new aFe Power BladeRunner Wastegate Actuator for the Dodge Diesel Trucks 98.5-02 L6-5.9L(td). Constructed out of coated black stamped steel for maximum strength and style, with locking jam nut for precise boost pressure settings. These units come preset to factory settings...