CONCERNS ABOUT FITMENT?

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control) – also known as...

aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. A calibration plug...

This oil pan has an increased oil capacity of approximately 0.5 quart over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Neodymium magnetic drain plug for engine...

This oil pan has an increased oil capacity of approximately 0.5 quart over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Neodymium magnetic drain plug for engine...

This differential cover is constructed from high-strength A356 cast aluminum and features machined fins for maximum strength and styling. Increased oil capacity of approximately 0.5 quart over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the...

aFe Power's new front differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. This cover...

This cover is constructed from high-strength A356 cast aluminum and features machined fins for maximum strength and styling. Increased oil capacity of approximately 1.46 quart over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil...

aFe Power's new differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for...

This transmission pan is constructed from high-strength A356 cast aluminum and features machined fins for maximum strength and styling. Increased oil capacity of approximately 4 quart over stock for better performance over a longer duration. Transmission pan is compatible with factory equipment and comes...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual high-flow stainless steel mufflers, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are dual 4-1/2 IN...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual high-flow stainless steel mufflers, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are dual 4-1/2 IN...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual high-flow stainless steel mufflers, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are dual 4-1/2 IN...

This axle-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual high-flow stainless steel mufflers, producing an aggressive sound. Muffler finish may vary. Finishing off this exhaust system are dual 4-1/2 IN...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing...

This cat-back exhaust system is constructed of 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing...

This Takeda Cat-Back Exhaust System for the Honda Civic (Sedan) with the L4-1.5L turbo engine utilizes 2-1/2" into 2-1/4" stainless steel tubing and incorporates dual, high-flow mufflers for improved performance across the power band. To finish off the exhaust, are dual welded-on 3-1/2" diameter...

aFe is proud to introduce an all new Takeda Dual Cat-Back Exhaust System for the Honda Civic Sedan EX/EX-L/Touring with the I4-1.5L turbo engine. This cat-back exhaust system utilizes 2-1/2" to 2-1/4" stainless steel tubing and incorporates dual, high-flow mufflers to improve performance across...

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter...

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter...

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter...

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. Finishing off this exhaust system are dual 4-1/2 IN diameter...

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This...

Even the latest-model sport compact vehicles have room for improvement and is why aFe POWER Takeda stainless steel cat-back exhaust system for the Honda Civic Type R L4-2.0L (t) engine is here to turn it up. In-house testing shows this Takeda exhaust system delivered...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque....

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound. Modular design utilizes stock mounting locations 100% TIG-Welded for strength and durability Dual 4-1/2"...

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound. Modular design utilizes stock mounting locations 100% TIG-Welded for strength and durability Dual 4-1/2"...

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound. Modular design utilizes stock mounting locations 100% TIG-Welded for strength and durability Dual 4-1/2"...

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound. Modular design utilizes stock mounting locations 100% TIG-Welded for strength and durability Dual 4-1/2"...

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 3 IN diameter 304 stainless steel black clamp-on exhaust tips. The tips features a laser etched Takeda logo...