Brembo Big Brake Kits for Chrysler 300 V6 (2005-2010)

This page lists every Brembo big brake kit we offer for the 2005-2010 Chrysler 300 (LX) with the V6 engine and rear-wheel drive. Brembo lists three kits: a GT 4-piston front kit and a GT 6-piston front kit, both on 355x32mm two-piece discs, and a GT 4-piston rear kit on 345x28mm two-piece discs. The LX 300 is a big, heavy sedan, and a Brembo GT kit gives it more heat capacity and a firmer, more consistent pedal than the factory single-piston brakes. A Brembo system replaces the caliper and disc on the axle you choose with a matched caliper, disc and pad package, sold as a complete axle set.

The front kits are offered with drilled or Type 3 slotted discs, and the rear kit with drilled, Type 1 slotted or Type 3 slotted discs. The 4-piston kits come in black, red or silver. The 6-piston front kit also comes in yellow, as a GT-S (black hard-anodized) or as a GT-R (billet-machined and nickel-plated).

See also: Chrysler 300 2011-2023 Brembo kits, Dodge Charger Brembo kits. Or browse all Brembo big brake kits.

Video: Brembo GT Kit

Brembo's own short overview of its GT big brake kits. The calipers, finishes and discs in the video are examples; the kit you get is the one you select above.

Choosing Your Kit

• Kit: Two front kits are listed first: a GT 4-piston kit on 355x32mm discs and a GT 6-piston kit on 355x32mm discs. Then comes one rear kit: a GT 4-piston kit on 345x28mm discs. Each kit name gives the axle, the system (GT or PISTA), the piston count and the disc size.
• Finish: front GT 4-piston 355x32mm kit and rear GT 4-piston 345x28mm kit: black, red, and silver; front GT 6-piston 355x32mm kit: black, red, silver, yellow, GT-S (black hard-anodized), and GT-R (billet-machined and nickel-plated). A finish that a kit does not offer cannot be selected for it.
• Disc Type: drilled discs suit street driving and give good wet-weather bite; Type 1 Slotted is a street and occasional-track disc; Type 3 Slotted is aimed at regular track days. Offered as follows: Drilled and Type 3 Slotted on the front GT 4-piston 355x32mm kit and front GT 6-piston 355x32mm kit; Drilled, Type 1 Slotted, and Type 3 Slotted on the rear GT 4-piston 345x28mm kit.

Features

• 4- and 6-piston Brembo calipers, matched to discs from 345x28mm to 355x32mm on this car
• 2-piece disc construction: an iron friction ring on a lighter aluminum bell
• GT caliper finishes plus GT-S (black, hard-anodized) and GT-R (billet-machined, nickel-plated) on the kits that list them
• Every kit is a complete axle set

What's Included

• GT, GT-S and GT-R kits, in Brembo's words: calipers, pads, discs, brackets, hoses and hardware.

Specifications

GT kits: add the finish code to the base part number for the exact part: 1 black, 2 red, 3 silver, 5 yellow, 7 fluorescent yellow, S GT-S, R GT-R. Replacement and upgrade pads for these calipers are sold separately.

FAQ

Does this fit the 300C or an AWD 300?
No. Brembo lists these kits for the V6 Chrysler 300 with rear-wheel drive only, and excludes AWD cars. The V8 300C has its own Brembo listing.

4-piston or 6-piston front kit?
Both use the same 355x32mm disc. The 6-piston caliper spreads the clamping force over a longer pad and offers more finish choices, including GT-S and GT-R.

Should I add the rear kit?
The front kit does most of the braking. Add the 4-piston rear kit for better balance and heat capacity, or if you want matching calipers front and rear.

Which disc should I choose?
Drilled discs are the classic look and suit street driving. Slotted discs keep the pad surface clean under heavy use and are the better choice for towing, mountain roads or track days. Every disc type on a kit is the same size and price.

Will these kits fit my wheels?
Every big brake kit needs wheel clearance, and the 355mm kits need the most room on the 300. Send us your wheel size and offset and we will check them against Brembo's clearance data before you order.

Fitment Notes

Brembo lists all kits on this page for the Chrysler 300 with the V6 engine, 2005-2010, excluding AWD models. Brembo GT systems are designed for cars at original ride height. Raising the ride height is not compatible with the brake lines included in these systems. The GT-R 6-piston caliper needs different wheel clearance from the GT 6-piston caliper.

Each kit fits the vehicles listed below. Confirm wheel clearance before ordering.

Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.

Fitment