RS3 Mods: The Best Upgrades for the Audi RS3 8V and 8Y
Quick answer: the best RS3 mods are an intake, a cat-back exhaust, lowering springs or coilovers, brake rotor upgrades and a tune, with a catted downpipe as the next step for more power. In the US, the RS3 was sold as the 8V sedan for 2017-2020 (400 hp, 354 lb-ft) and as the 8Y sedan from 2022 (401 hp, 369 lb-ft). Both use the 2.5L turbocharged five-cylinder. Many parts are generation-specific, so we list the years for every part below.

RS3 mods at a glance
| Order | Mod | 8V (2017-2020) | 8Y (2022+) | Price (at time of writing) |
|---|---|---|---|---|
| 1 | Intake | AWE S-FLO / Eventuri Gen 2 | AWE S-FLO | $1,515 / $1,695 |
| 2 | Exhaust | Remus front pipes | AWE Track or SwitchPath | from $1,795 |
| 3 | Springs | Eibach Pro-Kit | Eibach Pro-Kit / H&R Sport Springs | $395 / $539 |
| 4 | Coilovers | Ohlins Road & Track | Call us | $2,900 |
| 5 | Brakes | GiroDisc 2-piece rotors | GiroDisc 2-piece rotors | from $995 |
| 6 | Downpipe + tune | Milltek catted downpipe | Milltek catted downpipe | from $1,828 |
1. Intake
An intake is the classic first RS3 mod, mostly because it brings out the five-cylinder's induction sound and turbo noise. The AWE S-FLO Closed Carbon Intake for the 2017-2026 RS3 ($1,515) fits both the 8V and 8Y, and AWE also makes an open version ($945), a shortie ($605) and a 4.5" carbon inlet tube ($395). For the 8V, the Eventuri Black Carbon Intake for the 8V RS3 Gen 2 ($1,695, or $2,015 in carbon Kevlar) uses 88mm tubing all the way to the turbo and a sealed housing fed by the stock cold-air duct.
2. Exhaust
For the 8Y, AWE offers the louder Track Edition ($1,795, no tips) and the valved AWE SwitchPath exhaust for the 2022-2026 RS3 ($2,695, no tips), which lets you switch between quiet and loud. AWE sells conversion kits if you change your mind later. Akrapovic makes a titanium Evolution Line cat-back for the 2022-2027 RS3 sedan (it needs a separate link pipe). For the 8V, Remus makes front pipe sections (from $456.91).
3. Springs and coilovers
Lowering springs are the budget handling mod. The Eibach Pro-Kit ($395) is listed for the 2017-2020 and 2022-2024 RS3. For the 8Y, the H&R Sport Springs for the 2022 RS3 with DCC ($539) are made for cars with the RS sport suspension and adaptive dampers. On the 8V, the Ohlins Road & Track coilovers for the 2016-2020 8V ($2,900) add 20+ damping settings and adjustable ride height. Cars with magnetic ride need the Ohlins DCC cancellation kit.
4. Brakes
The RS3 is heavy in the nose, and hard track use heats the brakes fast. GiroDisc two-piece rotors pair a slotted iron ring with an aluminum hat, so they run cooler and weigh less than one-piece discs. The GiroDisc rear rotors fit the 2015-2027 RS3 ($995). For the front, GiroDisc makes 2-piece front rotors for the 2022-2026 RS3 8Y ($1,150) and 370mm replacement rings for the 2017-2022 cars ($880). Pair them with track pads and fresh high-temperature fluid.

5. Downpipe and tune
A tune is where the 2.5 TFSI makes its big gains. A downpipe is the usual next step, and Milltek says its large-bore downpipe needs a stage 2 ECU remap. For street cars, choose a catted version: the Milltek large-bore downpipe with a hi-flow sports catalyst for the 8V and 8Y RS3 starts at $1,828. Catless downpipes are for off-road and competition use only. Our catted vs catless downpipe guide explains the difference. A tune can affect your warranty and, in some states, emissions compliance.
Exterior and aero
For the 8Y sedan, Urban Automotive makes carbon splitters, side sills, a trunk spoiler and a rear diffuser (2022-2025), and TRE and Akrapovic offer carbon splitters and diffusers too.
RS3 mods FAQ
What are the best RS3 mods?
An intake, a cat-back exhaust, lowering springs or coilovers, two-piece brake rotors and a tune. A catted downpipe with a stage 2 tune is the next step for more power.
What is the first mod for an RS3?
An intake or an exhaust is the usual first mod, because both bring out the five-cylinder sound. Springs are the best value for handling.
Do 8V RS3 parts fit the 8Y RS3?
Some do. The AWE S-FLO intakes are listed for the 2017-2026 RS3, but exhausts, springs and coilovers are generation-specific. Always check the listed years.
How much horsepower does the RS3 have?
The US 8V RS3 (2017-2020) is rated at 400 hp and 354 lb-ft. The 8Y RS3 (2022 and newer) is rated at 401 hp and 369 lb-ft. Both use a 2.5L turbocharged five-cylinder.
Does an RS3 downpipe need a tune?
Yes. Milltek says its RS3 large-bore downpipe requires a stage 2 ECU remap.
Are catless downpipes legal on an RS3?
No. Catless downpipes are for off-road and competition use only. Choose a catted downpipe for a street car.
Questions about fitment? Call (310) 231-0292 or text (310) 886-3111.
