All Products

The Active Autowerke G2X brace replaces the factory chassis brace on the BMW G20 M340i and G22/G23/G26 M440i. It is designed to make room for larger exhaust systems. Active Autowerke includes this brace with its G2X M340i/M440i mid pipes and sells it on its...

Description:The Active Autowerke GESI G-Sport Ultra High Output catted downpipe for the BMW X5 G05, X6 G06, 540i (B58N) G30 2024+ is engineered to unlock the full potential of your B58N engine without sacrificing daily drivability or OBD2 compliance.Active Autowerke designed this downpipe to...

Hyundai and Kia's 2.5L four-cylinder is shared across several SUVs and the Santa Cruz pickup, and they all use this close-coupled manifold converter. MagnaFlow 290133 covers the 2021-2023 Sorento, 2023 Sportage, and 2022-2024 Santa Cruz and Tucson with the 2.5L. The compact catalyst bolts...

Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured,...

Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured,...

Offering up to 5,000 pounds of load-leveling capacity, the LoadLifter 5000 Ultimate with Air Spring Cradle load support kit from Air Lift for the 2021-2024 RAM TRX 4WD & 2025 RAM RHO 4WD makes towing and hauling a comfortable and stress-free experience. The LoadLifter...

For any questions please PM or email: Online@AutoTalent.com Dinan Turbo Inlet Pipe for BMW 230i / 330i / 430i 2019-2026 Instructions for Part# D760-0060 Unlock greater turbo responsiveness and an exhilarating auditory experience with the Dinan Carbon Fiber Turbo Inlet Pipe. This direct replacement upgrades...

For any questions please PM or email: Online@AutoTalent.com IPE SS Catless Downpipe (Non-OPF) for Ferrari Portofino 2017-2020 IPE represents cutting-edge innovation in high-performance exhaust technology, specializing in valvetronic systems for supercars and sports cars. With two decades of dedicated experience, the company maintains comprehensive in-house...

Behind the Niro's manifold converter sits a second catalyst in the underbody pipe, and that is the part MagnaFlow 280057 replaces. It interchanges with Kia OE 28601-G5200 and 28601-G5210 on 2017-2022 Niro hybrids and plug-in hybrids, from the FE and LX up to the...

For any questions please PM or email: Online@AutoTalent.com IPE SS Cat-Back Exhaust System (Factory Front Pipe) for BMW M3 / M4 Competition (G80/G82 - S58) 2021-2025 IPE represents cutting-edge innovation in high-performance exhaust technology, specializing in valvetronic systems for supercars and sports cars. With two...

For any questions please PM or email: Online@AutoTalent.com APR Performance Carbon Fiber Radiator Cooling Plates for Acura Integra Type S And A Spec DE5 2023+ APR Carbon Fiber Radiator Cooling Plates optimize engine cooling performance by channeling airflow directly into the radiator, preventing air from...

The NEW PURE600 is the entry point to big-turbo power on the second-generation B58. It is a complete new turbocharger that supports more than 550 wheel horsepower with fuel and supporting mods, and unlike the larger PURE units it can run on an off-the-shelf...

Capristo's cat spare pipes fit the 1996-1999 Ferrari 355 with Motronic 5.2 and the 1994-1995 car with Motronic 2.7. Two O2 sensor bung plugs are included for the 2.7 cars.Features Made entirely at Capristo's factory in Sundern, Germany Top-grade T309 (1.4828) stainless steel Premium...

Unleash the full potential of your RAM 1500 (DT), Jeep Wagoneer, or Grand Wagoneer equipped with the Hurricane engine with this all-new Momentum GT Cold Air Intake System. Engineered for performance and designed with precision, this next-generation intake system delivers improved airflow, enhanced throttle...

For the 2016-2019 Explorer with the 3.5L V6, BRExhaust 106-0943 replaces the system from the front pipe back to the split rear mufflers. It fits Base, XLT and Limited trims and comes as one box, so the whole rear exhaust can be swapped in...

When the Regal's exhaust has rusted through in more than one place, replacing it in sections gets expensive. BRExhaust 106-0889 replaces the complete system on 2011-2017 Buick Regals with the 2.0L, from the front pipe to the dual rear mufflers, in one box. The...

The second-generation Scion xB uses a single exhaust from the 2.4L four back to one rear muffler. BRExhaust 106-0843 replaces it for the full 2008-2015 run, interchanging with Toyota 17420-28820, 17430-28840 and 17451-0D131 among others, and ships in one box with a spring bolt...

The AWE Resonated Downpipes replace the factory post-cat resonated downpipes on Audi's 3.0T supercharged V6, the engine shared by the B8 and B8.5 S4 and S5 and the C7 and C7.5 A6 and A7 3.0T. They use larger-than-stock tubing for better flow, but carry...

The Wrangler 392 deserves an exhaust that sounds like a HEMI and survives the trail. The AWE SwitchPath Cat-Back Exhaust for the Jeep Wrangler Rubicon 392 is a dual 3-inch system engineered specifically for the 6.4-liter V8, with a resonated H-pipe that deepens and...

The Eibach PRO-KIT is a premium line of lowering springs designed to enhance the performance and appearance of your vehicle. Whether you're a car enthusiast looking to improve the handling of your daily driver or motorsports competitor looking for an edge on the track....

Built for the Porsche 911 GT3/GT3 RS (997.2), the Akrapovič Porsche 911 GT3/RS (997 FL) 3.8L Rear Carbon Fiber Lip (01-08-28-0001) is a Slip-On Line exhaust engineered by Akrapovič for these cars.What It DoesAs a slip-on (rear section) system it keeps the factory front...

The Eventuri black carbon intake for the B48A20T2 2.0L turbo is a fully sealed, high-volume system for the latest generation of BMW front-drive based M Performance models: the F74 M235 xDrive Gran Coupe, U10 X2 M35i and U11 X1 M35i.In the factory airbox the...

For any questions please PM or email: Online@AutoTalent.com Stillen Front Lip Spoiler for Nissan Altima 2013-2015 Upgrade the front end of your 2013-2015 Nissan Altima with the STILLEN Front Lip Spoiler. This polyurethane lip spoiler adds an aggressive and sporty touch to your Altima's...

For any questions please PM or email: Online@AutoTalent.com Stillen Front Splitter [Matte Black] for Nissan Altima 2016-2018 Give your 2016-2018 Nissan Altima a more aggressive and sporty look with the STILLEN Front Splitter. This addition not only enhances the aesthetics but may also contribute...

For any questions please PM or email: Online@AutoTalent.com Stillen Rear Spoiler [Carbon Fiber] for Infiniti Q60 2017-2022 Sporty Style and Enhanced Aerodynamics for Your Infiniti Q60 Upgrade the rear of your Infiniti Q60 with the STILLEN Carbon Fiber Rear Spoiler. Designed by STILLEN and...

For any questions please PM or email: Online@AutoTalent.com Stillen Rear Sway Bar for Nissan Maxima 2009-2014 SKU: 304401 Enhance Your Maxima's Handling with STILLEN Experience improved cornering and handling with the STILLEN Rear Sway Bar for the 2009-2015 Nissan Maxima. This high-performance sway bar...

For any questions please PM or email: Online@AutoTalent.com Dinan Cold Air Intake for BMW 230i / 330i / 430i 2019-2025 Instructions for Part# D760-0070 Note:  This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable...

For any questions please PM or email: Online@AutoTalent.com Dinan Cold Air Intake for BMW Z4 sDrive30i / Toyota GR Supra 2.0 2019-2024 Instructions for Part# D760-0066 Note:  This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company...

SPL Tie Rod Ends for the BMW G8X, G2X, and G42 allows for bumpsteer adjustment by allowing the tie rod end pivot to be relocated with the use of spacers. On lowered cars, this results in less dynamic toe change (aka bumpsteer) as the...

For any questions please PM or email: Online@AutoTalent.com Swift Springs Sport Spec-R Springs for Honda S2000 (AP1/2) 2000-2009 Swift Spec-R Sport Springs are designed to offer a blend of improved handling, enhanced performance, and a lowered ride height, while maintaining a high level of...