CONCERNS ABOUT FITMENT?

Our system does away with two potential boost leak points thanks to our single cast design. We've upgraded the factory rubber intercooler outlet hose to a multi-ply wire-reinforced silicone design with strong t-bolt clamps that resist boost leaks better than their stock counterparts. Our...

We upgrade the factory plastic pipe with a strong 60mm aluminum pipe. Due to the thin-walled nature of metal vs plastic, we're able to increase the internal diameter of the pipe to maximize airflow. The MAP sensor mounting point is made from CNC-machined billet-aluminum....

For 2019+ model year vehicles running the APR Throttle Body Inlet System without the APR intake system and diverter valve adapter, this adapter is required. Enabled APR Throttle Body System fitment on 2019+ vehicles CNC machined billet diverter valve reroute adapter Manifold plug with...

The APR Charge Pipe System is a comprehensive, direct replacement upgrade, to the factory system.The factory plastic and rubber turbo outlet pipe is a small and restrictive 38mm pipe that has shown to melt, deform, and cause boost leaks under extreme conditions. The APR...

APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower and torque across the entire RPM range with the supercharger operating at...

High horsepower configurations often require more fuel, especially on applications where ethanol is used. The APR 980cc MPI Injector Upgrade Kit includes an upgraded high-flow multiport injection (MPI) injector and harness necessary to satisfy high horsepower builds. The kit uses a compact and extended...

The factory plastic and rubber turbo outlet pipe is a small and restrictive 38mm pipe that has shown to melt, deform, and cause boost leaks under extreme conditions. The APR System remedies this by upgrading the system to a larger 60mm aluminum pipe, along...

APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower and torque across the entire RPM range with the supercharger operating at...

The Ultimate DQ500 DSG / S Tronic Transmission Catch Can and Breather System is here! The factory transmission features a plastic breather system that allows for transmission fluid expansion and removal of gases. Unfortunately, this system easily becomes taxed, causing transmission fluid to spew...

The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all...

APR's Roll-Control Front Stabilizer Bar End Links improve handling and response through the use of replaceable and swappable spherical bearings, intended for race use. The end links offer a great range of adjustability in both connection geometry and height, allowing elimination of pre-loading and...

APR's Roll-Control Front Stabilizer Bar End Links improve handling and response through the use of replaceable and swappable ball joints, intended for street use. The end links offer a great range of adjustability in both connection geometry and height, allowing elimination of pre-loading and...

The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all...

The APR Exhaust Valve Remote lets you override the factory exhaust valve operation to fully open the exhaust valves at the press of a button. Simply plug-and-play and press "ON" to open the valves fully. To return to the original behavior, press "OFF" and...

The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations!High quality components and extreme tolerances:The HPFP internals must be machined to extreme tolerances and installed in a clean environment or...

The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple...

APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management adjustments to handle the increased supercharger speeds, and in turn allows the...

The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel...

The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all...

The APR Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential of the 3.0 TFSI. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up to an astonishing 542 HP with APR's Supercharger and Crank Pulleys. Stunning...

This fit kit is required to fit the APR CPS system to C7 (pre facelift) and B8 (Pre Facelift) vehicles. All hoses and fittings included for a painless install Adapts the system to the B8 chassis All necessary fittings Spring Clamps This Part Fits:...

The APR Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential of the 3.0 TFSI. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up to an astonishing 542 HP with APR's Supercharger and Crank Pulleys. Stunning...

APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management adjustments to handle the increased supercharger speeds, and in turn allows the...

APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management adjustments to handle the increased supercharger speeds, and in turn allows the...

The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple...

The APR Coolant Performance System (CPS) is a massive front-mounted cooler upgrade that dramatically reduces intake air temperature (IAT), minimizes heat soak, and provides increased performance! It is 140% larger than the stock B8 unit and features a self-bleeding cooling circuit to ensure it...

The APR Short Shifter System is a comprehensive upgrade to the factory gear shifter assembly and is designed to reduce shifter movement, in all directions, while simultaneously improving shift quality. The system provides fine tuning of front-to-back and side-to-side movements to shorten shifts, counterweight...

The APR Turbo Inlet Pipe is an easy-to-install bolt-on upgrade that eliminates a restriction before the turbocharger. Unlike fabricated units on the market today, ours is cast from aluminum, allowing for an organically shaped inlet that transitions gradually over a large distance. Such a...

The APR Fueling System is a comprehensive upgrade required to safely support Stage 3+ power levels. The upgrade includes a larger in-tank low pressure fuel pump (LPFP). It's ethanol compatible. All necessary hardware is included for a seamless integration and the system is fully...

Designed for the DIY installers, the universal APR Catch Can System Block Off Plate is designed for use on vehicles where APR does not sell an application specific Catch Can System. The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk...