Install time is 6.3 hours without alignment.
Dinan's Performance Spring set for the F22 M235i/M240i provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the M235i/M240i by a 1/2" in the front and a full inch in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 10% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.
Benefits of the Dinan Performance Spring Set for the F22 M235i/M240i:
+ 10% increase in spring stiffness in front and 27% increase in the rear
+ Lowers the vehicle 1/2" in the front and a full inch in the rear
NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.
Models Supported by Dinan Performance Spring Set for the F22 M235i/M240i
- 2014-2016 M235i & xDrive F22 Coupe
- 2017-2018 M240i & xDrive F22 Coupe
Corresponding Ride Quality and Handling Kit highly recommended.
Refer to description for details.
|Labor Hours/Installation Hours
||2 front springs, 2 rear springs
Highly Recommended: D193-2201 - Supplemental Ride Quality & Handling Kit for BMW F22 M235i M240i (see product description for details).