All Products

The APEX VS-5RS is a forged wheel from APEX's Sprint Line, engineered specifically for Honda applications utilizing the 5x120 bolt pattern with 64.1mm center bore. This 18x10.5 ET47 wheel addresses the performance demands of Honda enthusiasts who require both strength and reduced unsprung weight...

The APEX VS-5RS is a forged wheel from APEX's Sprint Line, engineered specifically for BMW applications utilizing the 5x112 bolt pattern with 66.6mm center bore. This 19x9 ET25 wheel addresses the performance demands of BMW enthusiasts who require both strength and reduced unsprung weight...

The APEX Wheels VS-5 from the Evolution Line represents a precision-engineered flow formed wheel designed for applications requiring 5x120.65 bolt pattern compatibility. This 18x10 ET58 wheel addresses the demands of wide performance applications through APEX's flow formed construction process, which combines casting efficiency with...

The APEX Wheels SM-10 from the Evolution Line represents a precision-engineered flow formed wheel designed for applications requiring 5x112 bolt pattern compatibility, with primary development focused on Toyota Supra platforms. This 18x10 ET30 wheel addresses the demands of wide performance applications through APEX's flow...

The APEX Wheels SM-10 from the Evolution Line represents a precision-engineered flow formed wheel designed for BMW applications requiring 5x112 bolt pattern compatibility. This 19x9 ET28 wheel addresses the demands of performance applications through APEX's flow formed construction process, which combines casting efficiency with...

The Eventuri black carbon intake system for the 4.0 TFSI twin-turbo V8 is a complete induction system for the Audi RS Q8, SQ7 and SQ8, Lamborghini Urus, Porsche Cayenne Turbo and Bentley Bentayga V8. This version is for vehicles with the factory plastic turbo...

The Eventuri gloss carbon turbo inlet set for the BMW G90 M5 sedan and G99 M5 Touring replaces both factory inlet tubes ahead of the twin turbochargers on the S68 4.4L V8. It removes a restriction in the intake path that sits right before...

The Eventuri black carbon intake for the Chevrolet C8 Corvette Hard-Top Convertible replaces the factory airbox and trunk panel with an integrated carbon intake assembly for the 6.2L LT2 V8. It was designed from the ground up for the HTC, whose rear trunk packaging...

The Eventuri CSL carbon strut brace for the BMW G87 M2, G80 M3 and G82/G83 M4 is built to add chassis stiffness while placing a sculpted carbon structure across the S58 engine bay. This version is finished in gloss carbon.It is a structural part,...

The Eventuri BMW E9X M3 Black Carbon Inlet Plenum is a purpose-built upgrade engineered to enhance the acoustic character of BMW's naturally aspirated S65 4.0L V8 engine while preserving factory performance dynamics. Designed specifically for the E9X M3 platform, this carbon plenum replaces the...

The Eventuri Mercedes W465 G63 AMG Black Carbon Intake System is engineered for the M177-powered platform, addressing the restrictive factory intake architecture through a complete redesign that replaces the OEM airboxes with significantly larger pre-preg carbon fiber housings. This cold air intake system was...

The Eventuri Black Carbon Intake System for the Chevrolet C8 Corvette Z06 Hard-Top Convertible has been engineered from the ground up to address the airflow limitations of the naturally aspirated LT6 engine. By rethinking the constraints of the factory intake architecture, originally derived from...

The Eventuri Black Carbon Intake System represents a ground-up reengineering of the factory intake architecture for the Chevrolet C8 Corvette Z06 Coupe, developed specifically for the high-revving LT6 engine. Eventuri engineered this system to dramatically increase intake volume while optimizing airflow efficiency, addressing the...

The Active Autowerke EL Resonated bundle combines the two biggest sound upgrades for the S58 BMW G87 M2 in one order: the Active Autowerke valved rear axle-back exhaust and the patented Gen-2 equal length mid pipe with resonators. Bought together, they cost less than...

The Active Autowerke Gen-2 Signature equal length mid pipe with resonators replaces the factory mid section on the S58 BMW G87 M2. It is built on the equal length design Active Autowerke first developed for the F8X M cars and then the G80 M3...

The Active Autowerke Signature B58 downpipe replaces the factory part on the F-chassis BMW M240i, 340i and 440i. It starts at 4.5 in, carries Active Autowerke's 4.5 in AFlow high-flow cat, then steps to 3.5 in with a stainless flex joint before meeting the...

The SPEQ Series 19699 is MagnaFlow's performance exhaust for the new Charger with the 3.0L twin-turbo Hurricane Sixpack inline-six. It swaps every factory part from the catalytic converters back for a 3-inch, 304 stainless system built around two straight-through mufflers tuned for this engine,...

The Corsa Performance S650 Ford Mustang GT carbon fiber air intake offering has arrived and is unlike anything availabe in the marketplace. The Corsa Performance air intake system features two unique carbon fiber offerings including a matte carbon fiber intake offering that flawlessly matches...

The AMP Research POWERSTEPXL automatic electric-powered running board is designed for lifted trucks. The board has been integrated into a custom rocker rail and creates a seamless look while providing a 1.5 in. lower stepping surface than the original POWERSTEP. This allows easier access...

Getting into your truck shouldn't feel like climbing Mount Everest. That's why AMP Research invested in POWERSTEP, the automatic, electric-powered running board that instantly extends when you open your door, and then hides itself safely out of sight when the doors close for improved...

Getting into your truck shouldn't feel like climbing Mount Everest. That's why AMP Research invested in POWERSTEP, the automatic, electric-powered running board that instantly extends when you open your door, and then hides itself safely out of sight when the doors close for improved...

Getting into your truck shouldn't feel like climbing Mount Everest. That's why AMP Research invented the patented PowerStep , the automatic, electric-powered running board that instantly extends when you open your door, and retracts out of sight when the doors close for improved ground...

Getting into your truck shouldn't feel like climbing Mount Everest. That's why AMP Research invented the patented PowerStep , the automatic, electric-powered running board that instantly extends when you open your door, and retracts out of sight when the doors close for improved ground...

We design our lights from inception, patent every component we've designed, and guarantee that our products are compliant with the SAE and DOT requirements.This Part Fits: Year Make Model Submodel 2017-2018 Dodge Charger Daytona 2017-2018 Dodge Charger Daytona 392 2018-2023 Dodge Charger GT 2018...

Air Lift’s LoadLifter 5000 Ultimate with Air Spring Cradle for the Ford F-150 Raptor offers up to 5,000 lbs. of load-leveling capacity, making towing and hauling a stress-free experience. This kit features an internal jounce bumper, helping to absorb shock, even with zero air...

Built for enthusiasts, backed by legacy. Air Lift Performance Coilovers deliver superior quality, an aggressive stance, and a sporty ride you can trust. Get a lowered stance while still experiencing the best quality, designed for durability and performance. Our coilovers are the perfect solution...

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Adjustable Coil-Over Suspension System for BMW M2 2023-2026 Instructions - D190-8220.pdf Engineered exclusively for the G87 BMW M2, the Dinan Adjustable Coil-Over Suspension transforms the driving experience by masterfully balancing aggressive handling with...

The VRSF 3-inch cat-back exhaust replaces the factory exhaust from the downpipes back on the E82 135i coupe, with either the N54 or N55 engine. It merges the two downpipe connections into a single 3-inch pipe and is made entirely from 304 stainless steel.What...

This Valvetronic Designs valved sport exhaust system is engineered specifically for the 2021-2026 Mercedes-Benz AMG GLE 63/S (W167/C167). Close the valves for quiet cruising, or open them when you want the full sound.Available configurations Valved Sport Catback Exhaust System + Free Flow Race Downpipes...

For any questions please PM or email: Online@AutoTalent.com IPE SS Catted Downpipe for Nissan GT-R (R35) 2007-2025 IPE represents cutting-edge innovation in high-performance exhaust technology, specializing in valvetronic systems for supercars and sports cars. With two decades of dedicated experience, the company maintains comprehensive in-house...