For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Adjustable Coil-Over Suspension for BMW M6 Gran Coupe 2014-2019 Instructions for Part# D190-1011 The Dinan Adjustable Coil-Over Suspension system is engineered for drivers seeking peak performance and control from their vehicle. Developed through racing expertise and refined for everyday driving, this suspension setup enhances traction, stability, and handling across various driving conditions, inspiring confidence with its superior handling, reduced body roll, and minimized dive and squat during braking and acceleration. With threaded collars for customizable ride height, Dinan’s design retains the factory Electronic Damper Control (EDC) shocks while introducing adjustable springs and progressive bump stops. This allows for a sleek, lowered stance and increased suspension travel, delivering both aesthetic appeal and improved driving dynamics. For maximum safety, a tire clearance evaluation is advised when lowering beyond recommended levels. Features: Threaded collars provide easy, precise height adjustments for front and rear. Lowering adjustments : Up to 1-1/4" for the M5 (with a 3/4" recommended drop) and up to 1-1/8" for the M6 (with a 5/8" recommended drop). Stiffer springs (15% increase in both front and rear) for improved handling and reduced body roll. Suspension packers included for fine-tuning bump-stop clearance to optimize handling and comfort. Dinan-spec progressive bump stops to maintain ride quality at lowered heights. Durable components made from black-anodized 6061-T6 aluminum for a sleek look and corrosion resistance. Compatibility with BMW EDC shocks , preserving factory shock performance while enhancing suspension versatility. Note : Lowering may affect tire clearance. Please assess thoroughly to ensure safety; Dinan is not liable for damages or injuries if proper care is not taken during installation. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 9 Labor Time (Hours) 8.9 Length 33 Product Type HAS Kit Weight 47 Width 16 UPC 813725020631 Part Number D190-1011 Fitment Chart: Make Model Year BMW M6 Gran Coupe 2014-2019

For any questions please PM or email:  Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for 2.0L Turbo Engines (Mercedes-Benz) 2014-2020 Instructions for Part# D440-0034 The DINANTRONICS Sport boost controller is designed to deliver up to 30 HP and 40 lb-ft of torque. This easy-to-install and remove device enhances performance by re-mapping boost, fuel, and timing through the factory DME, providing immediate power gains. Its Bluetooth capability offers full user control with adjustability through a smartphone app, enabling you to switch between different power settings and even monitor real-time boost. Key Features: Up to +30 HP and +40 lb-ft of torque. Bluetooth Smart Connectivity: Android and iOS compatible (not supported on Android OS 8.0 "Oreo" or OS 14.0). Live Boost Monitor: Displays real-time boost data on your smartphone. Power Settings: Choose between Sport , Sport+ , and Race modes for various driving preferences. Valet/Parental Controls: Allows reduction of boost by -3 PSI for safer or restricted driving. Quick and Easy Installation: Plugs into a single sensor for a discrete and effortless install or removal. CARB EO Approval Pending. Warranty: 1-Year Product Warranty: Covers only the product itself, excluding consequential damages or labor costs. 14-Day Satisfaction Guarantee: A risk-free trial period of two weeks. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +40 Product Type Inline Module Weight 1 Width 6 UPC 813725023335 Part Number D440-0034   Fitment Chart: Make Model Year Mercedes C300 2015-2018 Mercedes CLA250 2014-2020 Mercedes E300 2017-2019 Mercedes GLA250 2015-2020 Mercedes GLC300 2016-2019 Mercedes METRIS 2016-2020 Mercedes SLC300 2017-2020 Mercedes SLK300 2016

Special Note:   Not for xDrive models. Product Description Dinan's Performance Spring set for the F30 340i (non xDrive) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the 340i by a full 1" in front and 1" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 25% increase in stiffness in front and 34% increase in the rear will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph, up to the top speed of the vehicle.  NOTICE:  Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits.    Benefits of the Dinan Performance Spring Set for the F30 340i (non xDrive): +   25% increase in spring stiffness in front, 34% increase in the rear.  +   Lowers the vehicle 1" in front and 1" in the rear +   Preset to prevent spring sag +   Compatible with both conventional and factory electronic shocks Models Supported by Dinan Performance Spring Set for the F30 340i (non xDrive) 2016-2018  340i & xDrive F30 Sedan  Corresponding Ride Quality and Handling Kit highly recommended. Refer to description for details. Product Specifications Labor Hours/Installation Hours 7.80 Required Items Highly Recommended:   D193-3201 - Supplemental Ride Quality & Handling Kit for BMW F30 340i - RWD (see product description for details).

Lightweight Flywheel and Clutch Assembly – Manual (Thru 5/06)   Product Description The Dinan flywheel has been lightened for a substantial 40% reduction in rotational inertia. All of the components necessary for a complete clutch replacement are included in the package. Dinan has carefully lightened the stock dual-mass flywheel improving driveline efficiency for faster acceleration and more immediate throttle response.  Models supported by D550-0010 2006 BMW 650i Convertible 2006 BMW 550i Sedan 2006 BMW 650i Coupe Special Note:   For Manual cars with a production date thru 5/06 only. Product Specifications Labor Hours/Installation Hours 7.30 Included Notes Included Item Details

Description: The rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle. Our replacement turbochargers been built to the stock BMW’s rigorous standards and testing to ensure compatibility. The replacement N54 turbos comes with a 2 year guarantee, unlimited mile warranty to secure your driving pleasure in the foreseeable future. High performing rear replacement turbo with the engineering expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement.    Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 MODELS SUPPORTED   2009-2016 BMW 1M 2011 BMW 135i 2009-2016 BMW Z4 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Product Specifications: Labor Hours/Installation Hours 15.50 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW X5M / X6M 2010-2014   Instructions - d100-0915.pdf   The Dinan Performance Spring Set for the E70 X5M and E71 X6M is designed to enhance the handling, stability, and stance of these high-performance BMW SUVs. With a focus on improving mechanical grip and body roll reduction, this suspension upgrade provides a more controlled and responsive driving experience, without sacrificing ride quality. Key Features: Lowered Ride Height : Front : Lowered by 3/4" . Rear : Lowered by 3/4" . This lowering enhances the suspension geometry, giving the vehicle a more aggressive stance while improving overall handling. Increased Spring Stiffness : The performance springs feature increased spring rates, which reduce rear suspension compression during acceleration and front suspension compression (or dive) under braking. This results in more stability and a controlled feel during spirited driving. Reduced Body Roll : A substantial reduction in body roll makes the vehicle's steering more responsive to driver input. This improvement is felt across a range of speeds, making the car more nimble and confident during cornering. Durable Construction : The springs are CNC wound using high-tensile chrome silicon wire and shot-peened for stress relief, ensuring durability and preventing spring sag over time. This design is built to last throughout the life of the vehicle. Improved Grip : The performance spring set improves high-speed driving grip, giving you the confidence to push your X5M or X6M to its limits, whether on highways or the track. Compatibility : The springs are compatible with load-leveling systems and factory electronic shocks , making them a versatile option for those with different suspension setups. Important Note: For optimal ride height performance and ride quality, Dinan recommends pairing the Performance Spring Set with the corresponding Ride Quality and Handling Kit . Although it's not explicitly required, not using the matching handling kit could lead to suboptimal results in terms of ride quality and handling. While Dinan provides a full warranty for product defects, any claims related to improper handling or ride quality resulting from not installing the complete kit will not be covered. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 8 Labor Time (Hours) 8.5 Length 14 Product Type Springs Weight 28 Width 8 UPC 813725020259 Part Number D100-0915   Fitment Chart: Make Model Year BMW X5M 2010-2014 BMW X6M 2010-2014

For any questions please PM or email:  Online@AutoTalent.com Dinan Performance Spring Set for BMW 435i / 440i 2014-2020   Instructions for Part# D100-0921 Special Note: Not compatible with xDrive models or the 435i/440i convertible. The Dinan Performance Spring Set for the F32/F36 435i/440i (RWD) provides significant improvements in handling, ride quality, and the vehicle's stance. Here’s a breakdown of the features and benefits: Key Features: Lowered Ride Height : F32 (Coupe) : The vehicle is lowered by 1" in the front and rear. F36 (Gran Coupe) : The vehicle is lowered by 3/4" in the front and rear. This lowered stance not only enhances the vehicle's aggressive look but also improves suspension geometry for better handling. Increased Spring Stiffness : F32 (Coupe) : The spring stiffness is increased by 50% in both the front and rear. F36 (Gran Coupe) : The spring stiffness is increased by 34% in the front and 11% in the rear. These increases in spring stiffness reduce suspension compression under acceleration (rear) and braking (front), enhancing control and reducing body movement. Reduced Body Roll : A significant reduction in body roll makes the vehicle feel more stable and responsive to steering input, improving cornering performance. This also enhances the car’s agility and control at all speeds. Improved Grip : The performance springs result in a noticeable improvement in grip , especially in high-speed driving situations. This allows for more confidence in the car’s handling during aggressive driving. Durable Construction : The springs are CNC wound from high tensile chrome silicon wire and shot-peened to relieve stress, ensuring long-term durability and preventing sag over time. Compatibility : The Dinan Performance Spring Set is compatible with both conventional and factory electronic shocks , making it a versatile option for owners of the F32/F36 435i/440i (RWD). Important Note: For optimal results, Dinan recommends installing the matching Ride Quality and Handling Kit alongside the Performance Spring Set. This ensures that the advertised ride height, performance, and ride quality are achieved. While not strictly required, installing only the spring set without the corresponding handling kit may result in suboptimal ride quality and handling characteristics. Any claims regarding improper handling or ride quality resulting from this mismatch will not be covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725020310 Part Number D100-0921 Fitment Chart: Make Model Year BMW 435i 2014-2016 BMW 440i 2017-2020

For any questions please PM or email: Online@AutoTalent.com Dinan Strut Tower Brace for BMW 323i / 325i / 328i / M3 / Z3 1992-2000 Instructions for Part# D180-0362 The Dinan Strut Tower Brace is designed to enhance both the performance and longevity of your vehicle by maintaining the structural integrity of the strut towers. By reducing flex during hard cornering, this brace provides sharper handling and a more responsive driving experience. The brushed aluminum and carbon fiber inlays offer a sleek, stylish appearance while delivering functional benefits. The brace is compatible with both Dinan Suspension Systems and stock components , and its machined end brackets ensure precise fitment over the strut tower reinforcements for a clean and secure installation. Key Features: Improved chassis rigidity for enhanced performance. Bolt-on installation to the top of the strut towers for easy setup. Decreased flex in the strut towers during cornering for sharper handling. Brushed aluminum with carbon fiber inlays for a refined, attractive look. Can be installed with Dinan Suspension Systems or stock components . Brand Dinan Dinan Point Value 2 Emission Code 5 Height 4 Labor Time (Hours) 0.5 Length 44 Product Type Strut Tower Brace Weight 6.6 Width 10 UPC 813725020587 Part Number D180-0362   Fitment Chart: Make Model Year BMW 323i 1998-1999 BMW 325i 1992-1995 BMW 328i 1996-1998 BMW 328is 1996-1999 BMW M3 1995-1999 BMW Z3 1997-2000

Description:   High performing rear replacement turbo with the engineering and reliability expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement. Our rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.   Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Models supported by D310-0072 2009 BMW Z4 sDrive35is Convertible Product Specifications: Labor Hours/Installation Hours 15.50 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email:  Online@AutoTalent.com Dinan Big Turbo Kit - No Core for BMW 5-Series | 6-Series | 7-Series (F Chassis, N55) 2012-2019 The Dinan Big Turbo Upgrade for the Electric Wastegate (EWG) N55 engine is an exceptional performance enhancement designed for racing enthusiasts or anyone seeking to maximize the power potential of their BMW. This upgrade offers a significant increase in airflow, enabling the turbo to generate higher boost pressures at elevated engine speeds while maintaining efficiency. The result is a dramatic boost in power and torque, allowing the N55 engine to achieve performance levels typically reserved for higher-tier models. Key Features & Benefits: Larger Compressor Wheel: The turbo's billet compressor/impeller wheel is 30% larger than the stock unit, allowing for significantly greater airflow. This enables the engine to produce higher boost pressures at higher RPMs, resulting in more power while retaining efficiency. Fully Cast Construction: The turbocharger is cast to Dinan's specifications and incorporates an upgraded thrust system , providing greater durability and reliability over stock turbos. This eliminates the need for core exchange programs and lengthy wait times, making the upgrade more convenient. Enhanced Durability: The upgraded thrust system ensures that the turbo can withstand the increased demands of higher boost levels, offering prolonged life and consistent performance. Power Gains: With the Stage 2 Flash and Dinan software, combined with an upgraded intercooler , the turbo delivers significant power and torque gains, with 93 octane fuel being the recommended setup. M2 (with Stage 2 Flash): Peak power: 417 BHP @ 6500 RPM Peak torque: 440 lb-ft @ 3500 RPM Max gains: +48 BHP @ 4000 RPM, +64 lb-ft @ 3000 RPM Non-M2 (with Stage 2 Flash): Peak power: 384 BHP @ 5500 RPM Peak torque: 439 lb-ft @ 3500 RPM Max gains: +122 BHP @ 4500 RPM, +162 lb-ft @ 3000 RPM Race gas options are also available for further power gains. Optimized Installation Procedure: The Dinan installation process is quicker than BMW's turbo replacement procedure, saving time and labor costs. This is particularly beneficial for RWD vehicles , where installation is simplified. Comprehensive Kit: The package includes all necessary o-rings and gaskets for installation on RWD vehicles. For xDrive vehicles , additional hardware is required (Dinan P/N D313-0117). Factory-Matching Warranty: Dinan offers a 4-year/50,000-mile new car warranty when the system is installed according to Dinan specifications, providing peace of mind for performance enthusiasts. Emissions Legal: The upgrade is 50-state emissions legal , certified under CARB EO # D-176-52 , ensuring compliance with emissions regulations across the U.S. Performance & Compatibility: This turbo upgrade is only compatible with electric wastegate vehicles. To fully realize the performance gains, Dinan recommends pairing the turbo with their Stage 2 Flash , an upgraded intercooler (Dinan Dual Core Intercooler where applicable), and high-octane fuel. Brand Dinan Dinan Point Value 2 Emission Code 1 Height 9 Labor Time (Hours) 11.5 Length 14 Product Type Turbocharger Weight 13 Width 14 UPC 813725024134 Part Number D310-0110A    Fitment Chart: Make Model Year BMW 535i 2012-2016 BMW 535i GT 2012-2017 BMW 535i GT xDrive 2012-2017 BMW 535i xDrive 2012-2016 BMW 640i 2012-2018 BMW 640i Gran Coupe 2013-2019 BMW 640i xDrive 2014-2018 BMW 640i xDrive Gran Coupe 2014-2019 BMW 740i 2013-2015 BMW 740Li 2013-2015 BMW 740Li xDrive 2013-2015

For any questions please PM or email: Online@AutoTalent.com Dinan Strut Tower Brace for BMW 5-Series 1997-2003  Instructions for Part# D180-0390 Dinan Strut and Shock Tower Braces are designed to maintain the structural integrity of your vehicle's strut and shock towers over time. By reducing flex during hard cornering , these braces improve handling and ensure more precise steering . Their brushed aluminum construction with carbon fiber inlays adds an aesthetic upgrade under the hood, while the machined end brackets ensure a precise and solid installation. Compatible with both Dinan Suspension Systems and stock components , these braces offer an effective way to enhance performance and durability. Key Features: Improved chassis rigidity for better handling. Bolt-on installation on top of the strut towers for ease of setup. Reduced flex in the strut and shock towers during cornering. Brushed aluminum and carbon fiber inlays for enhanced aesthetics. Compatible with Dinan Suspension Systems or OEM components . Brand Dinan Dinan Point Value 2 Emission Code 5 Height 4 Labor Time (Hours) 0.5 Length 44 Product Type Strut Tower Brace Weight 7.8 Width 10 UPC 813725020594 Part Number D180-0390   Fitment Chart: Make Model Year BMW 525i 2001-2003 BMW 528i 1997-2000 BMW 530i 2001-2003 BMW 540i 1997-2003 BMW M5 2000-2003

Description:   Superior performing pair of replacement turbos with the engineering and reliability to expect from all Dinan parts.  Revitalize your exhausted turbos with these high grade replacements. Our replacement turbo packages include a pair of rebuilt turbochargers which are modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.  Dinan Rebuilt Turbos for BMW E90/E92 335i (N54) includes : 1 Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54) 1 Rear Turbo Of Your Choice Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Total Core Charge: $ 2,400.00 Special Note: D310-0072 should ONLY be used when the vehicle is a right hand drive, RWD (not xi) application. For all other applications D310-0073 should be used. Labor time is 15.1 hours to install each pair of turbochargers unless the vehicle is xDrive equipped in which case an additional 1.9 hours is required totaling 17 hours of labor.  Models supported by Rebuilt Turbos E90/E92 335i 2009-2016 BMW 1M 2011 BMW 135i 2009-2016 BMW Z4 Product Specifications: Labor Hours/Installation Hours 30.8000 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes Includes a pair of turbochargers that have been rebuilt and modified with a heavy duty wastegate pivot. Required Items Refer to BMW recommended procedure for gaskets & hardware that MUST be replaced during turbocharger installation. Dinan's kit can also be used (D313-0010). Emission Status Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Special Notes Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Requires corresponding rear turbo, D310-0073 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - Requires corresponding front turbo, D310-0071 to function properly. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - Requires corresponding front turbo, D310-0071 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Required Products Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Corresponding Rear turbo (D310-0073) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Anti-Roll Bar Set for BMW M6 / M6 Gran Coupe 2012-2019 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars are designed to enhance the handling dynamics of your BMW by significantly reducing body roll while maintaining an optimal level of comfort. These anti-roll bars are specifically tuned for each BMW chassis, ensuring that your vehicle remains level during cornering and provides a more planted and confident driving experience. Front Anti-Roll Bar Diameter: 28mm (compared to stock size of 24.5mm) Weight Savings: 44% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 35% to 53% stiffer than the stock bar 2-hole design allows for mounting in 3 different positions Installation: Comes with adjustable left and right-hand threaded end links for easy length adjustment Rear Anti-Roll Bar Diameter: 22mm (compared to stock size of 21.5mm) Weight Savings: 29% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 39% to 72% stiffer than the stock bar 3-hole design allows for mounting in 3 different positions using stock BMW end links Features: Construction: Tubular (hollow) design for lightweight performance without sacrificing strength Market Unique: The only tubular anti-roll bars with a large range of adjustment available Performance Benefits: Less Body Roll: Enhances cornering stability and control More Mechanical Grip: Improves traction, especially during aggressive driving Increased Stability: Provides confidence at the limit, enhancing overall driving experience Upgrade to Dinan's Lightweight Tubular Adjustable Anti-Roll Bars to experience a more responsive and dynamic ride, tailored specifically for your BMW chassis. This performance enhancement allows you to enjoy the thrill of driving while benefiting from improved handling characteristics. Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 3.2 Length 44 Product Type Sway Bar Weight 30 Width 10 UPC 813725020433 Part Number D120-0560   Fitment Chart: MAKE MODEL YEAR BMW M6 2012-2018 BMW M6 Gran Coupe 2014-2019

For any questions please PM or email: Online@AutoTalent.com Dinan Front Roll Control System for BMW M5 / M6 2006-2010 Note: Designed for use with D120-0491 (21mm Rear Anti-roll Bar) for proper balance. Dinan Front Roll Control System enhances the handling and cornering confidence of your BMW by significantly reducing body roll. Features: Less Body Roll : Minimizes body roll to keep the vehicle level, allowing for sharper turns and improved handling. Increased Mechanical Grip : Boosts grip by keeping more of the tire's contact patch on the road for better traction. Enhanced Stability at the Limit : Increases driver confidence by delivering a stable and planted feel in corners, especially under high-performance conditions. This Front Roll Control System is optimized to work in conjunction with the 21mm Adjustable Rear Anti-Roll Bar for balanced handling. It is compatible with Dinan’s Stage 1 Suspension System, allowing gradual upgrades for those building up their BMW's performance capabilities in stages. Ideal for vehicles with a less than 30mm difference between front and rear tire widths, this upgrade repositions the mounting points of the stock anti-roll bar, effectively stiffening the system and elevating overall performance. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 4 Labor Time (Hours) 1 Length 6 Product Type Sway Bar Weight 4 Width 9 UPC 813725020440 Part Number D133-0495 Fitment Chart: Make Model Year BMW M5 2006-2010 BMW M6 2006-2010

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for BMW M2 / X1 / X3 / X4 / X5 / X6 / Z4 2011-2019 FOR BMW N20/N26/N55 Engines Instructions for Part# D440-0010 The DINANTRONICS Sport is a powerful and user-friendly boost controller designed to enhance the performance of BMW models equipped with the N20 and N55 engines. Its easy installation, Bluetooth compatibility, and adjustable power settings make it ideal for enthusiasts who want to boost their driving experience without complicated modifications. Maximum Gains: N20 Engine: Up to +30 HP and +50 lb-ft of torque. N55 Engine: Up to +30 HP and +40 lb-ft of torque. Key Features: Bluetooth Smart Compatibility: Works with both Android and iOS (except Android OS 8.0 "Oreo" & OS 14.0). Live Boost Monitoring: Real-time boost data streaming via a smartphone app, mimicking sport gauges found in iDrive. Multiple Power Settings: Includes Sport, Sport+, and Race modes for customizable performance. Valet / Parental Control: Limits boost by -3 PSI for safer driving when needed. Quick and Easy Installation: Plug-in design connects to a single sensor for discreet installation or removal. Automatic Engine Detection: The unit automatically recognizes the engine and adjusts its mapping accordingly. Warranty and Notes: 1-Year Product Warranty: Covers the product itself but excludes consequential damages or labor reimbursement. CARB EO Approval Pending: The unit is CARB EO submitted, with approval pending. 14-Day Satisfaction Guarantee: Risk-free trial for two weeks. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +50 Product Type Inline Module Sale Category Tuners and Programmers Weight 1.5 Width 6 UPC 813725022789 Part Number D440-0010     Fitment Chart: Make Model Year BMW M2 2016-2018 BMW M235i 2014-2016 BMW M235i xDrive 2015-2016 BMW X1 2012-2015 BMW X3 2011-2017 BMW X4 2015-2018 BMW X5 2014-2018 BMW X6 2015-2019 BMW Z4 2012-2016