AMS Performance

The AMS Performance R8/Huracan Billet Rear Toe Links replace the weak factory links, whose rubber bushings deflect. In AMS track testing, the stock links flexed under hard launches and pulled the rear toe out of alignment. Spherical bearing heim joints remove that deflection, so...

The AMS Performance VW Golf R Mk7 Chopped Carbon Fiber Intake System (part number AMS.21.08.0001-2) replaces the bulky factory airbox with chopped carbon fiber tubing and a dry media filter. It draws a larger volume of cold air into the stock turbo and is...

A twin turbo system on a Lamborghini Huracan makes a lot of extra heat, especially in hot climates. The AMS Performance V10 Ice Tank adds thermal capacity to the intercooler system so the car makes the same power pull after pull without heat soaking.The...

The AMS 3.5L EcoBoost F-150 and Raptor Turbine Housing Adapter Kit (part number AMS.32.05.0002-1) replaces the factory adapters between the turbos and the downpipes. AMS calls them the largest, most free-flowing adapters on the market, and they are all-new castings, not reworked OEM parts.Internal...

The AMS Performance R8/Huracan Billet Rear Toe Links replace the weak factory links, whose rubber bushings deflect. In AMS track testing, the stock links flexed under hard launches and pulled the rear toe out of alignment. Spherical bearing heim joints remove that deflection, so...

The AMS Performance R35 GT-R Race X Solid Engine Mount System (part number ALP.07.03.0012-1) replaces the soft rubber factory mounts so engine torque goes straight to the pavement. You can feel the sharper throttle response the moment it is installed.The two front mounts are...

The AMS Performance R35 GT-R 4 Bar MAP Sensor Upgrade (part number ALP.07.13.0002-1) is a plug-and-play fix for boost control above 24 psi. The factory sensor only reads reliably to 24 psi, which leaves little room for a working boost cut and no way...

This is the AMS Performance R35 GT-R Intake Manifold with Cast Aluminum Plenums with the standard fuel rail, finished in black anodizing on the billet runners. AMS designed it to be the most efficient, most powerful cast VR38 manifold available, and against the leading...

This is the AMS Performance R35 GT-R Carbon Fiber Intake Manifold with the standard fuel rail, finished in red anodizing on the billet runners. AMS designed it to be the most efficient, most powerful VR38 manifold available, and against the leading cast aluminum manifold...

This is the AMS Performance R35 GT-R Carbon Fiber Intake Manifold with the standard fuel rail, finished in blue anodizing on the billet runners. AMS designed it to be the most efficient, most powerful VR38 manifold available, and against the leading cast aluminum manifold...

The AMS Performance 2017-2020 Ford Raptor 3.5L EcoBoost Street Downpipes (part number AMS.45.05.0001-2) open up the exhaust path out of the turbos, the first step to more power on any twin-turbo engine. Less restriction improves spool time, boost threshold and overall output.The inlet has...

The AMS Performance 2015-2019 Lamborghini Huracan Titanium Exhaust Tips (part number ALP.22.05.0002-1) add an exotic, high-performance look to the rear of the car. They are made from lightweight motorsports-grade titanium with a blue heat-anodized finish and a laser-engraved AMS logo on the outside.They are...

The AMS Performance R35 GT-R OMEGA Turbo Kit Lower Intercooler Piping completes an AMS OMEGA turbo kit. It grows the lower intercooler pipes from 70mm (2.75") to 76mm (3"), which AMS says gives the greatest increase in horsepower and torque from added airflow.Cast compressor...

The AMS Performance R35 GT-R Front Bumper Repair Kit (part number ALP.07.06.0002-1) fixes a common problem on 2009-2016 GT-Rs: the mounting points along the bottom of the front bumper crack or break, so the front lip sags or will not attach at all.The kit...

The AMS Performance Nissan Z 3.0L VR30 Stage 1 Long Block is a fully assembled engine for high horsepower builds. AMS machines it with in-house equipment and assembles it in a temperature and humidity controlled clean room, and the engine is strengthened in several...

The AMS Performance Infiniti Q50/Q60 3.0L VR30 Stage 1 Long Block is a fully assembled engine for high horsepower builds. AMS machines it with in-house equipment and assembles it in a temperature and humidity controlled clean room, and the engine is strengthened in several...

The AMS Performance R35 GT-R OMEGA Turbo Kit Lower Intercooler Piping completes an AMS OMEGA turbo kit. It grows the lower intercooler pipes from 70mm (2.75") to 76mm (3"), which AMS says gives the greatest increase in horsepower and torque from added airflow.Cast compressor...

The AMS Performance BMW M340i B58 Heat Exchanger (part number AMS.51.02.0001-1) upgrades the front heat exchanger that cools the B58 air-to-water intercooler. The factory system can heat soak quickly under hard use, in hot climates or on long pulls, and that costs power.The AMS...

The AMS Performance 2020+ Toyota GR Supra Intake Manifold replaces the factory manifold and its integrated air-to-water intercooler. As power rises, so do charge temperatures, and AMS uses a parallel twin-core design that routes coolant for very efficient cooling. The cores are rated for...

The Wavetrac R190 Limited Slip Rear Differential (part number 44.309.170WK), offered through AMS Performance, brings quicker acceleration and faster cornering to the Infiniti Q50 and Q60. It replaces the open factory differential with a gear-type LSD that keeps both rear wheels driving.What sets Wavetrac...

The AMS Performance R35 GT-R Oil Cooler Upgrade (part number ALP.07.02.0104-1) replaces the factory engine oil cooler, part 21305-JF02B, which is very expensive to replace from Nissan. AMS designed a better-cooling, bolt-in alternative at a fraction of the factory price.Instead of the factory tube-and-fin...

The AMS Performance R35 Race Oil Filter Adapter Plate lets a high-horsepower GT-R run a proper racing oil filter in the stock location. In high-rpm testing AMS saw the stock filter collapse its media, balloon its casing and spend time in bypass, leaving the...

This is the AMS Performance R35 GT-R Intake Manifold with Cast Aluminum Plenums in its triple fuel rail configuration for 18 injectors, built for VR38 engines aiming past 2,000 hp. The extra rail places injectors at an optimized spray angle for better atomization.The manifold...

The AMS Performance R35 GT-R Fuel Rail Upgrade (part number ALP.07.07.0002-1) replaces factory fuel rails that AMS found become a restriction above about 900 horsepower. The AMS engineering team tested every factory fuel component in its flow test cell, found the restrictions and designed...

The AMS Performance OMEGA 14 R35 GT-R Turbo Kit is a stock-location turbo kit built around Garrett GTX3582 Gen II CHRAs. AMS says it is capable of low 8-second quarter miles and 1,350+ whp with the right supporting parts. It takes its name from...

The AMS Performance Toyota GR Supra Heat Exchanger (part number AMS.38.02.0001-1) upgrades the front heat exchanger that cools the Supra air-to-water intercooler. The B58 does not use a typical air-to-air front mount; it cools charge air with coolant, and the stock system can heat...

The AMS Performance 2015-2021 Subaru WRX Front Mount Intercooler Kit keeps intake temperatures down and power up on the FA20 WRX, whether you live somewhere hot, drag race or make long high-speed pulls. It replaces the stock top-mount intercooler with a front-mount core that...

The AMS Performance Alpha V10 Intake Manifold replaces the plastic factory manifold on the 5.2L FSI V10 in the Lamborghini Huracan and second-generation Audi R8. When AMS developed its twin-turbo V10 program, it found the OEM plastic manifold could fail under the positive pressure...

The AMS Performance Toyota GR Supra Carbon Fiber Air Intake (part number AMS.38.08.0001-1) replaces the plastic factory filter box and intake tube on the A90 Supra 3.0 with matte carbon fiber parts and a dry media filter. AMS testing showed a 25% reduction in...

The AMS Performance R35 GT-R Billet Flywheel (part number ALP.07.03.0011-1) replaces the factory two-piece flywheel and reluctor ring with a one-piece part machined from billet 4140 chromoly steel. AMS says it was the first aftermarket GT-R flywheel with an integrated sensor ring, so you...