For any questions please PM or email: Online@AutoTalent.com Dinan Cold Air Intake for BMW X5M / X6M 2015-2019 Instructions for Part# D760-0047 Note:   This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. The Dinan Carbon Fiber Cold Air Intake System for F8x X5M/X6M not only transforms the underhood aesthetics but also delivers an impressive performance upgrade through its innovative filter and airbox design. By expanding the intake’s filter area by 228% and creating a larger airbox, Dinan has crafted a system that draws more air, reduces intake restrictions, and improves throttle response. The carbon fiber lid, tailored to fit within the hood’s limits, provides a premium look that matches the vehicle's high-performance character while enabling more airflow and a sportier tone. Key Features: Power Gains : +23 HP at 5500 RPM and +25 lb-ft of torque at 4000 RPM (with tuning). Enhanced Airflow : 228% increase in filter area (146.2 in² per filter vs. stock 44.5 in²), with the custom filters drawing air from all sides. Larger Volume Airbox : Enlarged by ~15%, the carbon fiber lid provides the necessary space for the larger filters. Sportier Sound : Slightly more audible intake noise for a sportier driving experience. Premium Carbon Fiber Design : Striking appearance that enhances the engine bay with a signature look. Bolt-On Installation : Easily installs with no major modifications needed. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 12 Labor Time (Hours) 0.5 Length 30 Max HP Gain 23 @ 5500 RPM Max Torque (lb-ft) Gain 25 @ 4000 RPM Product Type Cold Air Intake Sale Category Cold Air Intakes Weight 11 Width 20 UPC 813725023496 Part Number D760-0047 Fitment Chart: Make Model Year BMW X5M 2015-2018 BMW X6M 2015-2019

For any questions please PM or email: Online@AutoTalent.com Dinan Resonator Delete Kit for BMW M5 2018-2023 Instructions for Part# D660- 0081 The Dinan Resonator Delete Kit for the F90 M5 delivers a heightened exhaust note with an enhanced, fuller sound that brings out the performance characteristics of BMW’s high-powered sedan. By removing the factory resonator and incorporating a specially designed X-pipe, this kit promotes smooth, even flow to both exhaust tips, eliminating the inconsistencies often present in stock systems. The result is a bolder, more resonant tone with improved sound clarity and volume. Key Features: Enhanced Exhaust Sound : Produces a louder, smoother, and more balanced tone, perfecting the exhaust sound profile of the F90 M5. Flow Optimization : Replaces the stock hydro-formed piping with 3.25" (83mm) mandrel-bent T304 stainless steel tubing, which reduces backpressure and enhances exhaust flow. Innovative X-Pipe Design : The kit includes a handcrafted X-pipe, which evens out the exhaust flow and minimizes restrictions, ensuring consistent sound and performance improvement over stamped X-pipes. Durable Build : Constructed entirely from T304 stainless steel with a brushed finish, ensuring durability and resistance to the elements. Bolt-On Installation : Designed for easy installation, the kit includes all necessary mounting hardware for a straightforward, factory-like fitment. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 10 Labor Time (Hours) 2 Length 30 Product Type Resonator Delete Sale Category Exhaust Weight 25 Width 29 UPC 813725028804 Part Number D660-0081   Fitment Chart: Make Model Year BMW M5 2018-2023

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M3 / M4 ( F8x ) 2015-2020 The F8x M3/M4 offers an exhilarating sound straight from the factory, but with a Dinan Free Flow Axle-Back Exhaust system, it transforms into a symphony of power and refinement that will impress even the most discerning ear. This system is made from 100% 304 stainless steel and is precisely engineered to ensure a perfect fit using the factory hangers and mounting points. Dyno-tuned to provide maximum exhaust flow with minimal backpressure, it offers a more aggressive sound during acceleration, while advanced drone abatement technologies reduce cabin resonance at low speeds. The system features computer-controlled valves that stay quiet during everyday driving but fully open under high-load conditions for free flow and optimal sound. Key Features: Power Gains: +5 HP Drone Abatement Technologies: Reduces cabin resonance for a refined sound Sound Profile: Enjoyably louder and sportier, with an aggressive tone under hard acceleration Exhaust Tips: Quad 3.5" laser engraved tips available in polished stainless steel or black ceramic-coated finish Computer-Controlled Valves: Adjust the sound via the M-Drive settings, reusing stock exhaust valve actuators for seamless operation Secondary Exhaust Valves: Twin 76mm valves are 45% less restrictive than the OE, enhancing flow and performance Weight Reduction: Dinan exhaust is 3 lbs lighter than the stock system Construction: 100% 304 stainless steel for long-lasting durability and corrosion resistance Fitment: Uses factory brackets and hangers for a factory-like installation Dinan's Free Flow Axle-Back Exhaust is backed by their industry-exclusive factory-matching new car bumper-to-bumper warranty and designed and tested in Morgan Hill, California . Available for purchase and installation at any Dinan Approved BMW dealership nationwide , this system perfectly embodies Dinan’s philosophy of "Performance Without Sacrifice."   Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.8 Length 50 Max HP Gain 5 Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 56 Width 34 UPC 813725021874 Part Number D660-0050-BLK Fitment Chart: Make Model Year BMW M3 2015-2018 BMW M4 2015-2020

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M5 ( F90 ) 2018-2023 The Dinan Free Flow Exhaust System for the BMW F90 M5 enhances the already remarkable performance of this luxury super sedan by transforming its exhaust note into a more aggressive and powerful symphony. The stock F90 M5 is known for its refined performance, but Dinan believes it deserves an exhaust note that fully matches its formidable capabilities. With this exhaust system, the M5 is given a louder and more aggressive tone without sacrificing comfort, drone control, or the refined character BMW drivers expect. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque at 6600 RPM. Refined Aggression: The exhaust note remains subdued during low-speed driving but becomes ferociously aggressive during hard acceleration, all while maintaining a drone-free cabin thanks to the retained computer-controlled exhaust valves . Larger Piping: The exhaust system uses 83mm tubing (compared to the stock 80mm), allowing for freer flow, which improves performance and sound. Improved Exhaust Flow: Dinan’s exhaust incorporates absorption and reactive technologies to reduce backpressure and optimize exhaust flow. Quad Exhaust Tips: The system features four 4" (102mm) double-walled, polished exhaust tips , which are clamp-on for easy customization or replacement. These tips fill the factory cut-outs for a striking, aggressive look, while maintaining Dinan's signature straight-cut design . Durable Construction: Built entirely from T304 stainless steel , the exhaust is TIG welded for superior craftsmanship and comes with a brushed finish for a sleek appearance out of the box. Customizable Sound: With the stock exhaust valve actuators reused, the exhaust tone can still be adjusted through the M-drive settings , allowing the driver to switch between refined and aggressive modes based on driving conditions. Larger Secondary Valves: The twin 76mm secondary exhaust valves (30% less restrictive than stock) further enhance flow and performance under load. Easy Installation: A simple bolt-on design with all necessary mounting hardware ensures ease of installation. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 13 Labor Time (Hours) 2.4 Length 50 Max HP Gain 10 @ 6600 RPM Max Torque (lb-ft) Gain 8 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 63 Width 34 UPC 813725025070 Part Number D660-0079-BLK   Fitment Chart: Make Model Year BMW M5 (F90) 2018-2023

Description: Other manufacturer's shifters employ metal components which tend to be noisier and induce a notchy feel. The short-shifter is also rubber isolated for a solid feel and vibration free operation. Dinan's billet short-shifter has a 20% to 25% reduction in throw with a self-lubricating bearing for the ultimate in smooth short shifter technology. The kit effectively reduce the amount of throw necessary to make gear changes providing a sportier feel. It is s imple to install and zero maintenance.  Larger BMW models with larger gear boxes require more leverage to make the gear changes, which is why BMW employs different shift handle configurations for various applications.   Dinan short shifters are application specific as well in order to achieve an appropriate reduction of throw, providing the associated benefits without making the desired gear difficult to locate or require disproportionate effort; a common complaint with other manufacturers' short-shift kits where a ''one size fits all'' approach is common. In addition, Dinan's short-shifters retain the nylon pivot ball and shifter bushing, which provides the same smooth and quiet operation as the original shifter. Benefits: A precise 20-25% throw reduction Counter balanced to reduce effort  Two piece 416 Stainless Steel & Aluminum Stick assembly  Two piece stick provides vibration free operation  Dampened pivot cup with self lubricating pivot ball  Polymer Iglide T-500 lower pivot bushings Special Note: Does not work with the 6-speed manual that was introduced for the 2004-06 model years on the 330i/ci. This includes all ZHP cars. Models supported by D550-1004 1991-1995 BMW 318i 2000 BMW 323ci 2001-2006 BMW 325ci 1987-1995 BMW 325is 2001-2003 BMW 330i 1997-2003 BMW 540i 2000-2003 BMW M5 1991-1995 BMW 318is 1999-2000 BMW 323i 1987-2005 BMW 325i 2001-2003 BMW 330ci 2001-2003 BMW 530i 1988-2006 BMW M3 Product Specifications: Labor Hours/Installation Hours 0.80 Included Notes Short-Shift Handle and bushing.

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M550i xDrive ( G30 ) 2018-2023 The Dinan Free Flow Axle-Back Exhaust for the BMW G30 M550i marks a new chapter in Dinan's exhaust system design. This system is engineered to improve exhaust flow , reduce back pressure , and enhance power output , delivering gains of +8 HP and +6 lb-ft of torque at 6600 RPM . While retaining the brand's hallmark balance between a civilized tone and aggressive sound under acceleration, the M550i exhaust introduces a bold new design for the exhaust tips, which are now massive 4" diameter double-walled tips. These clamp-on tips are a first for Dinan, offering easy replacement or customization options without welding. Like other Dinan exhausts, the M550i system features drone abatement technologies to minimize cabin noise at low RPM, ensuring a quiet and comfortable interior even during high-performance driving. The computer-controlled exhaust valves retained from the stock system modulate the sound, limiting noise during low-speed driving but opening fully under load to allow free exhaust flow and deliver a deep, throaty V8 tone. The result is a refined yet sporty note that accentuates the M550i’s performance. Constructed from 100% 304 stainless steel , this exhaust system offers durability and resistance to corrosion, ensuring long-lasting performance. The system also provides a straightforward installation with a bolt-on design , utilizing the factory hangers and including all necessary mounting hardware. Key Features: Power Gains: +8 HP and +6 lb-ft of torque at 6600 RPM Sound: Louder, sportier sound with controlled exhaust valves to manage noise at low speeds Drone Reduction: Incorporates technologies to reduce low-RPM drone, keeping the cabin quiet Exhaust Tips: Four 4" diameter double-walled, clamp-on tips available in polished or ceramic black finishes, laser engraved with the Dinan logo Material: 100% 304 stainless steel for durability and corrosion resistance Installation: Easy bolt-on installation with included hardware, using factory hangers for a seamless fit Brand Dinan Dinan Point Value 3 Emission Code 5 Height 16 Labor Time (Hours) 1.9 Length 66 Max HP Gain 8 @ 6600 RPM Max Torque (lb-ft) Gain 6 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 73 Width 30 UPC 813725024660 Part Number D660-0075-BLK Fitment Chart: Make Model Year BMW M550i xDrive 2018-2023

Description:   Replacement turbo packages include a pair of rebuilt turbochargers that have been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle. Replacement turbochargers been built to the stock BMW’s rigorous standards and testing to ensure compatibility. The replacement N54 turbos comes with a 2 year guarantee, unlimited mile warranty to secure your driving pleasure in the foreseeable future. Dinan Rebuilt Turbos for BMW E93 335i (N54) includes : Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54) 1 Rear Turbo Of Your Choice Core Program:  Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores. Special Note: D310-0072 should ONLY be used when the vehicle is a right hand drive, RWD (not xi) application. For all other applications D310-0073 should be used.   Labor time is 15.5 hours to install each pair of turbochargers. Core Charge: $ 1200.00 Models supported by Rebuilt Turbos E93 335i 2007-2010 BMW 335i Convertible 2011-2013 BMW 335is Convertible Product Specifications: Labor Hours/Installation Hours 30.8000 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes Includes a pair of turbochargers that have been rebuilt and modified with a heavy duty wastegate pivot. Required Items Refer to BMW recommended procedure for gaskets & hardware that MUST be replaced during turbocharger installation. Dinan's kit can also be used (D313-0010). Emission Status Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Special Notes Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Requires corresponding rear turbo, D310-0073 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - Requires corresponding front turbo, D310-0071 to function properly. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - Requires corresponding front turbo, D310-0071 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Required Products Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Corresponding Rear turbo (D310-0073) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E88 135i (N54)(D310-0072) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E90/E92 335i (N54)(D310-0073) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. 2007-2010 BMW 335i 2009-2010 BMW 335i xDrive 2011-2013 BMW 335is 2007-2008 BMW 335xi

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for BMW / Toyota (B46/B48/B58 Engines) 2016-2025 B46/B48/B58 Engines Instructions for Part# D440-0047 The DINANTRONICS Sport boost controller offers impressive performance enhancements across different engine types. It provides up to +40 HP and +50 lb-ft of torque for the B58 engine, and up to +25 HP and +50 lb-ft of torque for B46/B48 engines. Its straightforward design allows for quick installation and removal, making it an accessible solution for car enthusiasts seeking performance boosts. With built-in Bluetooth Smart capabilities, users can adjust boost levels on the fly, monitor boost data live via the mobile app, and customize settings to match their driving preferences. Key Features: Performance Gains: B58 Engine: Up to +40 HP and +50 lb-ft of torque . B46/B48 Engines: Up to +25 HP and +50 lb-ft of torque . Bluetooth Smart Connectivity: Compatible with Android and iOS devices (except for Android OS 8.0 "Oreo" and OS 14.0). Live Boost Monitor: Displays real-time boost data, similar to the sport gauges on iDrive. Power Settings: Choose from Sport , Sport+ , and Race modes for various performance levels. Valet/Parental Control Modes: Reduce boost by -3 PSI for limited power in specific scenarios. Quick and Discrete Installation: Connects to a single sensor for fast installation or removal. Factory DME Integration: Works with the factory ECU to re-map boost, fueling, and timing for optimized performance. CARB EO Approval Pending. Warranty: 1-Year Product Warranty: Covers the unit itself, excluding consequential damages or labor costs. 14-Day Satisfaction Guarantee: Provides a trial period for the product. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +40 Max Torque (lb-ft) Gain Up to +50 Product Type Inline Module Sale Category Tuners and Programmers Weight 2 Width 6 UPC 813725023762 Part Number D440-0047   Fitment Chart: Make Model Year BMW 230i 2017-2025 BMW 230i xDrive 2017-2025 BMW 330i 2017-2024 BMW 330i xDrive 2017-2024 BMW 340i 2016-2018 BMW 340i xDrive 2016-2018 BMW 430i 2017-2025 BMW 430i Gran Coupe 2017-2024 BMW 430i xDrive 2017-2025 BMW 430i xDrive Gran Coupe 2017-2024 BMW 440i 2017-2020 BMW 440i Gran Coupe 2017-2020 BMW 440i xDrive 2017-2020 BMW 440i xDrive Gran Coupe 2017-2020 BMW 530i 2017-2023 BMW 530i xDrive 2017-2023 BMW 540i 2017-2023 BMW 540i xDrive 2017-2023 BMW 740i 2016-2022 BMW 740i xDrive 2016-2022 BMW 840i 2020-2025 BMW 840i Gran Coupe 2020-2025 BMW 840i xDrive 2020-2025 BMW   840i xDrive Gran Coupe 2020-2025 BMW M240i 2017-2024 BMW M240i xDrive 2017-2024 BMW M340i 2020-2024 BMW M340i xDrive 2020-2024 BMW M440i 2021-2025 BMW   M440i Gran Coupe 2022-2024 BMW M440i xDrive 2021-2025 BMW   M440i xDrive Gran Coupe 2022-2024 BMW X3 2018-2024 BMW X4 2019-2025 BMW X5 2019-2023 BMW X6 2020-2023 BMW X7 2019-2023 BMW Z4 2019-2025 Toyota GR Supra 2020-2025

Description: Superior performing pair of replacement turbos with the engineering and reliability you’ve come to expect from all Dinan parts. Revitalize your exhausted turbos with these high grade replacements. Our replacement turbo packages include a pair of rebuilt turbochargers which have been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.  Dinan Rebuilt Turbos for BMW E82 1M 135i (N54) includes: Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54) Dinan Rebuilt Rear Turbo for BMW E82 135i/1M (N54) Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Total Core Charge: $ 2,400.00 Special Note: Labor time is 15.0 hours to install each pair of turbochargers. Models supported by Rebuilt Turbos E82 1M 135i 2008-2010 BMW 135i Coupe 2011 BMW 1M Coupe Product Specifications: Labor Hours/Installation Hours 30.3000 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes Includes a pair of turbochargers that have been rebuilt and modified with a heavy duty wastegate pivot. Required Items Refer to BMW recommended procedure for gaskets & hardware that MUST be replaced during turbocharger installation. Dinan's kit can also be used (D313-0010). Emission Status Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E82 135i/1M (N54)(D310-0072) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Special Notes Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Requires corresponding rear turbo, D310-0073 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Dinan Rebuilt Rear Turbo for BMW E82 135i/1M (N54)(D310-0072) - Requires corresponding front turbo, D310-0071 to function properly. Required Products Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Corresponding Rear turbo (D310-0073) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E82 135i/1M (N54)(D310-0072) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Throttle Body for BMW 545i / 645ci / 745i / X5 2002-2006 Instructions for Part# D760-3600A   Note: Not compatible with the X5 4.4i (E53) from 2000-2003, Stage 3 Engine Software recommended for optimum performance and drivability. The Dinan High Flow Throttle Body for Valvetronic engines is engineered to improve performance by reducing intake air-flow restriction, allowing the engine to breathe more freely. Despite the presence of a throttle body in Valvetronic engines, it operates differently, primarily assisting with traction control and functioning as a "safety valve." Dinan’s larger-bore throttle body enhances airflow most effectively in wide-open throttle conditions, boosting horsepower and torque when paired with Dinan engine software. Features: Increased Power Output : E60 545i & E63/E64 645Ci : +5 HP @ 6500 RPM, +4 LB-FT @ 5500 RPM (with engine software) E65/E66 745i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) 2004-06 E53 X5 4.4i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) E53 X5 4.8is : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) Improved Throttle Response : Enhances engine responsiveness for a more dynamic driving experience. Larger Bore : Expanded by 3mm for an 8% increase in air flow area, optimizing intake efficiency and power potential. Brand Dinan Clearance Category Air and Fuel Delivery Dinan Point Value 2 Emission Code 1 Labor Time (Hours) 0.8 Max HP Gain 5 - 8 (Depending on application) Max Torque (lb-ft) Gain 4 - 8 (Depending on application) Product Type Throttle Body Sale Category Throttle Bodies Weight 6 UPC 813725028415 Part Number D760-3600A   Fitment Chart: Make Model Year BMW 545i 2004-2006 BMW 645ci 2004-2005 BMW 745i 2002-2005 BMW 745Li 2002-2005 BMW X5 2004-2006

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for MINI Cooper & BMW X1 / X2 / 228i / M235i 2014-2024 Instructions for Part# D440-0012 The DINANTRONICS Sport for BMW engines is a versatile boost controller designed for the B48 and B38 engines, offering a significant performance boost with quick, simple installation and user-adjustable settings via Bluetooth. Maximum Gains: B48 Engine: Up to +30 HP and +40 lb-ft of torque. B38 Engine: Up to +20 HP and +40 lb-ft of torque. Key Features: Bluetooth Smart Compatibility: Works with both Android and iOS (excluding Android OS 8.0 "Oreo" & OS 14.0). Live Boost Monitor: Real-time boost data displayed on the smartphone app, similar to sport gauges in the iDrive system. Multiple Power Settings: Choose from Sport , Sport+ , and Race modes to customize performance. Valet / Parental Control Modes: Reduce boost by -3 PSI for safer driving scenarios. Quick and Discrete Installation: Plugs into a single sensor, allowing for easy and clean installation or removal. Automatic Engine Detection: The unit automatically identifies the engine and adjusts mapping accordingly, providing flexibility across various vehicle applications. Warranty and Additional Information: 1-Year Product Warranty: Covers only the product itself and excludes consequential damages or labor costs. CARB EO Approval Pending: Approval is in process, ensuring emissions compliance. 14-Day Satisfaction Guarantee: Try the product for two weeks with a no-risk satisfaction guarantee. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +40 Product Type Inline Module Sale Category Tuners and Programmers Weight 1.5 Width 6 UPC 813725022796 Part Number D440-0012   Fitment Chart: Make Model Year Mini Cooper  2014-2024 Mini Cooper Countryman 2017-2024 Mini Cooper Clubman 2016-2024 BMW X2 2018-2023 BMW X1 2016-2022 BMW 228i Gran Coupe 2021-2024 BMW 228i xDrive Gran Coupe 2020-2024 BMW M235i xDrive Gran Coupe 2020-2024

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Throttle Body Set for BMW M3 2008-2013   Instructions for Part# D760-3900 The Dinan High Flow Throttle Bodies for the BMW M3 are precision-engineered to increase airflow and improve throttle response. Each of the M3’s eight individual throttle bodies is bored to a larger internal diameter, expanding the airflow area by 8% for better combustion chamber access, resulting in enhanced power and responsiveness. Carefully flow-matched on a Superflow Flow bench, these throttle bodies provide seamless drivability without triggering faults. Features: Increased Power : +7 HP at 8000 RPM and +5 LB-FT at 3900 RPM Enhanced Throttle Response : For a quicker, more responsive feel Optimized Airflow : Throttle bodies are bored 2mm larger, resulting in an 8% increase in airflow area Brand Dinan Clearance Category Air and Fuel Delivery Dinan Point Value 2 Emission Code 1 Height 10 Labor Time (Hours) 8 Length 24 Max HP Gain 7 @ 8000 RPM Max Torque (lb-ft) Gain 5 @ 3900 RPM Product Type Throttle Body Weight 8 Width 18 UPC 813725029047 Part Number D760-3900   Fitment Chart: Make Model Year BMW M3 2008-2013

For any questions please PM or email:  Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for 2.0L Turbo Engines (Mercedes-Benz) 2014-2020 Instructions for Part# D440-0034 The DINANTRONICS Sport boost controller is designed to deliver up to 30 HP and 40 lb-ft of torque. This easy-to-install and remove device enhances performance by re-mapping boost, fuel, and timing through the factory DME, providing immediate power gains. Its Bluetooth capability offers full user control with adjustability through a smartphone app, enabling you to switch between different power settings and even monitor real-time boost. Key Features: Up to +30 HP and +40 lb-ft of torque. Bluetooth Smart Connectivity: Android and iOS compatible (not supported on Android OS 8.0 "Oreo" or OS 14.0). Live Boost Monitor: Displays real-time boost data on your smartphone. Power Settings: Choose between Sport , Sport+ , and Race modes for various driving preferences. Valet/Parental Controls: Allows reduction of boost by -3 PSI for safer or restricted driving. Quick and Easy Installation: Plugs into a single sensor for a discrete and effortless install or removal. CARB EO Approval Pending. Warranty: 1-Year Product Warranty: Covers only the product itself, excluding consequential damages or labor costs. 14-Day Satisfaction Guarantee: A risk-free trial period of two weeks. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +40 Product Type Inline Module Weight 1 Width 6 UPC 813725023335 Part Number D440-0034   Fitment Chart: Make Model Year Mercedes C300 2015-2018 Mercedes CLA250 2014-2020 Mercedes E300 2017-2019 Mercedes GLA250 2015-2020 Mercedes GLC300 2016-2019 Mercedes METRIS 2016-2020 Mercedes SLC300 2017-2020 Mercedes SLK300 2016

For any questions please PM or email: Online@AutoTalent.com Dinan Cold Air Intake for BMW 335i / 435i / M2 / M235i 2012-2018 Instructions for Part# D760-0038 Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is  NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Intake installation on convertibles and M2 requires modification of a brace. Please consult the installation instructions for details. The Dinan High Flow Carbon Fiber Intake for the N55 Engine enhances airflow and throttle response while maintaining the efficiency of the stock intake design. By channeling cold outside air through an optimized, straightened carbon fiber tube, this intake reduces air resistance and improves overall engine performance. Featuring a sealed, larger-volume airbox with an expanded cylindrical filter, this intake system maximizes airflow while delivering a sportier intake sound. Key Features: Power Gains : +8 HP and +6 lb-ft (M2); +10 HP and +15 lb-ft (other platforms). Sporty Sound : Enhanced intake tone complements the improved performance. Sealed Cold-Air System : Maximizes insulation, preventing heat soak. Optimized Design : Carbon fiber intake tube mimics the stock design but with a straighter flow for less resistance. Enlarged MAF : Increases air intake capacity. Quick Installation : Bolt-on setup can be completed in under an hour. Emissions Compliance : CARB EO D-176-56 certification for select models (e.g., 2012-15 F30 335i). Brand Dinan Dinan Point Value 3 Emission Code 7 Height 10 Labor Time (Hours) 1 Length 24 Max HP Gain 8 -10 (Depending on application) Max Torque (lb-ft) Gain 6 - 15 (Depending on application) Product Type Cold Air Intake Sale Category Cold Air Intakes Weight 8 Width 18 UPC 813725021973 Part Number D760-0038   Fitment Chart: Make Model Year BMW 335i 2012-2015 BMW 435i 2014-2016 BMW M2 2016-2018 BMW M235i 2014-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Strut Tower Brace for BMW M3 2008-2013  Instructions for Part# D180-0011 The Dinan Carbon Fiber Strut Tower Braces are designed to enhance both the aesthetics and performance of your engine bay. Built from aerospace-quality aluminum and carbon fiber , these braces are not only strong but also lightweight. The carbon fiber rods are secured with black powder-coated forged aluminum ends , connecting seamlessly to the stock mounts. By replacing the stock aluminum tube with this sleek upgrade, you will improve chassis rigidity and frame your engine beautifully with carbon fiber. These braces can be installed with any Dinan suspension system or stock components, and the carbon fiber weave is designed to perfectly match the Dinan High Flow Carbon Fiber Intake for a cohesive look. Key Features: Aerospace-quality carbon fiber and aluminum construction. Mounts in the stock location for easy installation. Improved chassis rigidity for enhanced performance. Carbon fiber weave matches the Dinan High Flow Intake in color and design. Adds a sleek and refined look to the engine bay Brand Dinan Dinan Point Value 2 Emission Code 5 Height 4 Labor Time (Hours) 0.5 Length 16 Product Type Strut Tower Brace Weight 1.6 Width 4 UPC 813725020556 Manufacturer Part Number 0 Part Number D180-0011   Fitment Chart: Make Model Year BMW M3 2008-2013

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Mid-Pipe for BMW 340i / 440i 2016-2020 Instructions for Part# D660-0057 Note:   Only confirmed to fit with the Dinan Free Flow Axle Back and stock exhaust systems. Fitment with other axle back units is not guaranteed. The Dinan High Flow Mid-Pipe for the F30 340i and F32 440i transforms the factory sound into a bolder, more aggressive tone, and enhances it even further when paired with a Dinan exhaust. This mid-pipe system replaces the factory center section and removes both resonators, incorporating 3.25" mandrel-bent T304 stainless steel tubing for improved flow, an amplified exhaust note, and a 3-pound weight reduction over the stock setup. Key Features: Enhanced Sound : Deletes both resonators, delivering a more aggressive exhaust note. Improved Flow : Replaces stock hydro-formed 80mm piping with 3.25" (82.6mm) mandrel-bent stainless steel for optimized exhaust flow. Premium Construction : Built from 100% T304 stainless steel for durability. Weight Reduction : Weighs 21 lbs compared to the stock 24 lbs. Easy Installation : Bolt-on design includes all necessary mounting hardware. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 10 Labor Time (Hours) 2.5 Length 64 Product Type Mid-Pipe Sale Category Exhaust Weight 31 Width 19 UPC 813725023250 Part Number D660-0057   Fitment Chart: Make Model Year BMW 340i 2016-2018 BMW 340i xDrive 2016-2018 BMW 440i 2017-2020 BMW 440i xDrive 2017-2020

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW G30 540i 2017-2023 The Dinan Free Flow Axle-Back Exhaust for the G30 540i is designed to enhance exhaust flow by reducing back pressure, resulting in increased power and a sporty, aggressive sound. Utilizing the same muffler as its B58 siblings, this system improves both tone and performance, adding intoxicating burbles and pops under hard acceleration. While the exterior sound is bold, the cabin remains comfortable thanks to the Helmholtz chamber, which minimizes low-RPM drone. Crafted from 100% 16-gauge 304 stainless steel for durability, the exhaust also features a striking new tip design with massive quadrilateral black ceramic-coated tips for a high-performance aesthetic that transforms the rear of the 540i. Easy bolt-on installation ensures perfect fitment using the factory hangers. Key Features: Power Gains: +6 HP and +5 lb-ft @ 6600 RPM Drone Reduction: Helmholtz chamber design reduces low-RPM resonance for cabin comfort Sound: Louder, sportier, and more aggressive with added burbles and pops Exhaust Tips: Twin quadrilateral black ceramic-coated tips with laser-engraved Dinan logos Material: 100% 16-gauge 304 stainless steel for long-lasting durability Valve Removal: Eliminates the factory computer-controlled exhaust valve for consistent flow and sound Installation: Uses factory brackets and hangers for easy, factory-like fitment Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.3 Length 55 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Weight 45 Width 30 UPC 813725025148 Part Number D660-0078-BLK   Fitment Chart: Make Model Year BMW  G30 540i  2017-2023

For any questions please PM or email: Online@AutoTalent.com Dinan Camber Plates for BMW 128i / 135i / 325i / 328i / 330i / 335i / 335is 2006-2013  Dinan camber plates for the 1 and 3 Series offer a straightforward solution for enhancing your vehicle's handling performance. With factory camber adjustments already available, Dinan shifts the range by an additional -0.7 degrees , allowing for more aggressive negative camber, significantly improving grip and reducing understeer in corners. Unlike adjustable camber plates, Dinan's design retains factory bushings, preserving ride quality and avoiding unwanted noise. Features: Additional -0.7 degrees of camber for improved handling. Reduces understeer and enhances cornering performance. Decreases outside edge tire wear , extending tire life. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 3 Labor Time (Hours) 3.5 Length 6 Product Type Camber Plates Weight 1.4 Width 6 UPC 813725020464 Part Number D160-0004   Fitment Chart: Make Model Year BMW 128i 2008-2013 BMW 135i 2008-2013 BMW 135is 2013 BMW 325i 2006 BMW 328i 2007-2013 BMW 328i xDrive 2009-2013 BMW 330i 2006 BMW 330xi 2006 BMW 335i 2007-2013 BMW 335i xDrive 2009-2013 BMW 335is 2011-2013 BMW 335xi 2007-2008

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for BMW 2 / 3 / 4 / 5 / 6 / 7-Series 2011-2019 FOR BMW N20/N26/N55 Engines Instructions for Part# D440-0010 The DINANTRONICS Sport is a powerful and user-friendly boost controller designed to enhance the performance of BMW models equipped with the N20 and N55 engines. Its easy installation, Bluetooth compatibility, and adjustable power settings make it ideal for enthusiasts who want to boost their driving experience without complicated modifications. Maximum Gains: N20 Engine: Up to +30 HP and +50 lb-ft of torque. N55 Engine: Up to +30 HP and +40 lb-ft of torque. Key Features: Bluetooth Smart Compatibility: Works with both Android and iOS (except Android OS 8.0 "Oreo" & OS 14.0). Live Boost Monitoring: Real-time boost data streaming via a smartphone app, mimicking sport gauges found in iDrive. Multiple Power Settings: Includes Sport, Sport+, and Race modes for customizable performance. Valet / Parental Control: Limits boost by -3 PSI for safer driving when needed. Quick and Easy Installation: Plug-in design connects to a single sensor for discreet installation or removal. Automatic Engine Detection: The unit automatically recognizes the engine and adjusts its mapping accordingly. Warranty and Notes: 1-Year Product Warranty: Covers the product itself but excludes consequential damages or labor reimbursement. CARB EO Approval Pending: The unit is CARB EO submitted, with approval pending. 14-Day Satisfaction Guarantee: Risk-free trial for two weeks. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +50 Product Type Inline Module Sale Category Tuners and Programmers Weight 1.5 Width 6 UPC 813725022789 Part Number D440-0010     Fitment Chart: Make Model Year BMW 228i 2014-2016 BMW 228i xDrive 2015-2016 BMW 320i 2012-2018 BMW 320i xDrive 2013-2018 BMW 328i 2012-2016 BMW 328i xDrive 2012-2016 BMW 335i 2012-2015 BMW 335i xDrive 2013-2015 BMW 428i 2014-2016 BMW 428i Gran Coupe 2015-2016 BMW 428i xDrive 2014-2016 BMW 428i xDrive Gran Coupe 2015-2016 BMW 435i 2014-2016 BMW 435i Gran Coupe 2015-2016 BMW 435i xDrive 2014-2016 BMW 435i xDrive Gran Coupe 2015-2016 BMW 528i 2012-2016 BMW 528i xDrive 2012-2016 BMW 535i 2012-2016 BMW 535i xDrive 2012-2016 BMW 640i 2012-2018 BMW 640i Gran Coupe 2013-2019 BMW 640i xDrive 2012-2018 BMW 640i xDrive Gran Coupe 2013-2019 BMW 740i 2013-2015 BMW 740Li 2013-2015 BMW 740Li xDrive 2013-2015

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Throttle Body for BMW 545i / 645ci / 745i / X5 2002-2006 Instructions for Part# D760-3600A   Note: Not compatible with the X5 4.4i (E53) from 2000-2003, Stage 3 Engine Software recommended for optimum performance and drivability. The Dinan High Flow Throttle Body for Valvetronic engines is engineered to improve performance by reducing intake air-flow restriction, allowing the engine to breathe more freely. Despite the presence of a throttle body in Valvetronic engines, it operates differently, primarily assisting with traction control and functioning as a "safety valve." Dinan’s larger-bore throttle body enhances airflow most effectively in wide-open throttle conditions, boosting horsepower and torque when paired with Dinan engine software. Features: Increased Power Output : E60 545i & E63/E64 645Ci : +5 HP @ 6500 RPM, +4 LB-FT @ 5500 RPM (with engine software) E65/E66 745i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) 2004-06 E53 X5 4.4i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) E53 X5 4.8is : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) Improved Throttle Response : Enhances engine responsiveness for a more dynamic driving experience. Larger Bore : Expanded by 3mm for an 8% increase in air flow area, optimizing intake efficiency and power potential. Brand Dinan Clearance Category Air and Fuel Delivery Dinan Point Value 2 Emission Code 1 Labor Time (Hours) 0.8 Max HP Gain 5 - 8 (Depending on application) Max Torque (lb-ft) Gain 4 - 8 (Depending on application) Product Type Throttle Body Sale Category Throttle Bodies Weight 6 UPC 813725028415 Part Number D760-3600A   Fitment Chart: Make Model Year BMW 545i 2004-2006 BMW 645ci 2004-2005 BMW 745i 2002-2005 BMW 745Li 2002-2005 BMW X5 2004-2006

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M6 2012-2019 Dinan's Free Flow Axle-Back Exhaust system is engineered for optimal performance and durability, featuring 100% stainless steel construction tailored to exact specifications for a perfect fit with factory hangers and mounting points. This exhaust system is dyno-tuned to achieve maximum exhaust flow with minimal backpressure, ensuring a more aggressive sound during acceleration while effectively reducing drone inside the cabin. Key Features: Power Gains: +8 HP Helmholtz Chamber and Butterfly Valve Technology: Reduces drone and optimizes sound quality Design: Straight-through canister design for efficient flow Sound Quality: Produces an enjoyably louder, throatier, and deeper exhaust note Exhaust Tips: Quad 3.5" options available in black ceramic-coated or polished stainless steel, laser engraved for a high-end finish Durability: Constructed from 100% 304 stainless steel for resistance against corrosion Easy Installation: Utilizes factory brackets and hangers for a seamless fit Every Dinan product comes with an industry-exclusive factory matching new car bumper-to-bumper warranty , ensuring peace of mind. The exhaust system is designed and tested in Morgan Hill, California , and is available for purchase and installation at any Dinan Approved BMW dealership nationwide . This exhaust system exemplifies Dinan's commitment to providing performance without sacrifice , enhancing both sound and power without compromising the refined characteristics of your BMW. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 2.2 Length 48 Max HP Gain 8 Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 64 Width 30 UPC 813725021836 Part Number D660-0049-BLK   Fitment Chart: Make Model Year BMW M6 2012-2019

Special Note:   Not compatible with xDrive equipped cars.   Install time is 6.3 hours without alignment. Product Description Dinan's Performance Spring set for the F22 M235i/M240i provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the M235i/M240i by a 1/2" in the front and a full inch in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 10% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.    Benefits of the Dinan Performance Spring Set for the F22 M235i/M240i: +  10% increase in spring stiffness in front and 27% increase in the rear +   Lowers the vehicle 1/2" in the front and a full inch in the rear NOTICE:  Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. Models Supported by Dinan Performance Spring Set for the F22 M235i/M240i 2017-2021 BMW M240i 2014-2016 BMW M235i Corresponding Ride Quality and Handling Kit highly recommended.  Refer to description  for details. Product Specifications Labor Hours/Installation Hours 7.80 Included Notes 2 front springs, 2 rear springs Required Items Highly Recommended:   D193-2201 - Supplemental Ride Quality & Handling Kit for BMW F22 M235i M240i (see product description for details).

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 328i / 330i xDrive 2013-2018 Instructions - d100-0911.pdf Special Note:   For xDrive models. Not compatible with RWD models or anything other than the sedan body style. The Dinan Performance Spring Set for the F30 328i/330i (xDrive) is designed to improve both the handling and stance of your vehicle while maintaining a smooth, high-quality ride. This is achieved by carefully tuning the spring rates to reduce body roll, improve suspension geometry, and provide a more controlled driving experience. Key Features: Lowered Ride Height : The vehicle is lowered by 1" in both the front and rear, enhancing the car’s stance and improving suspension geometry for better performance. Enhanced Spring Stiffness : The springs are 30% stiffer, reducing rear suspension compression under acceleration and front suspension dive under braking. This leads to more control, stability, and an overall more responsive driving experience. Durable Construction : The springs are CNC wound from high tensile chrome silicon wire and shot-peened for stress relief, ensuring long-lasting performance without sag. Improved Grip and Handling : The increased stiffness and reduced body roll translate into better mechanical grip, especially at high speeds, making the car more responsive to steering inputs at all speeds, from low to top speed. Compatibility : The springs are compatible with both conventional and factory electronic shocks, making them a versatile upgrade for various setups. Important Note : To achieve the best performance and ride quality, it is highly recommended to pair the Dinan Performance Spring Set with the corresponding Ride Quality and Handling Kit . Using the spring set without the matching handling kit may result in less-than-ideal ride quality and handling characteristics, which will not be covered under warranty.   Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 8.2 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725020211 Part Number D100-0911 Fitment Chart: Make Model Year BMW 328i xDrive 2013-2016 BMW 330i xDrive 2017-2018

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for 3.0L Turbo Engines (Mercedes-Benz) 2015-2020 Instructions for Part# D440-0035 The DINANTRONICS Sport boost controller offers performance gains of up to 40 HP and 40 lb-ft of torque , providing an easy-to-install solution for boosting vehicle performance. Designed for effortless installation or removal, it is a highly accessible option for car enthusiasts looking for quick, noticeable results. With its built-in Bluetooth Smart functionality, users can easily adjust boost levels and monitor live boost data through the app, making it a versatile performance upgrade. Key Features: Performance Gains: Up to +40 HP and +40 lb-ft of torque. Bluetooth Smart Connectivity: Compatible with Android and iOS devices (Android OS 8.0 "Oreo" and OS 14.0 not supported). Live Boost Monitor: Real-time data streaming through the app, similar to sport gauges in iDrive. Power Settings: Choose between Sport , Sport+ , and Race modes for customizable power output. Valet/Parental Control Modes: Reduce boost by -3 PSI for restricted driving scenarios. Quick and Easy Installation: Discrete installation via a single sensor, requiring no complex tools. Factory DME Integration: Works in tandem with the factory ECU to optimize boost, fueling, and timing. CARB EO Approval Pending. Warranty: 1-Year Product Warranty: Limited to the product itself, excluding consequential damages or labor costs. 14-Day Satisfaction Guarantee: A trial period to ensure customer satisfaction. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +40 Max Torque (lb-ft) Gain Up to +40 Product Type Inline Module Weight 1 Width 6 UPC 813725023953 Part Number D440-0035   Fitment Chart: Make Model Year Mercedes C400 2015 Mercedes C43 AMG 2017-2020 Mercedes C450 AMG 2016 Mercedes CLS400 2015-2017 Mercedes E400 2015-2018 Mercedes E43 AMG 2017-2018 Mercedes E450 2019-2020 Mercedes GL450 2015-2016 Mercedes GLC43 AMG 2017-2020 Mercedes GLE400 2016-2019 Mercedes GLE450 AMG 2016 Mercedes GLE550E 2016-2017 Mercedes GLS450 2017-2019 Mercedes ML400 2015 Mercedes S450 2018-2020 Mercedes S550E 2015-2017 Mercedes SL400 2015-2016 Mercedes SL450 2017-2020 Mercedes SLC43 AMG 2017-2020

Description:   Superior performing pair of replacement turbos with the engineering and reliability you’ve come to expect from all Dinan parts.  Revitalize your exhausted turbos with these high grade replacements and enjoy driving again just like you did on day one. Our replacement turbo packages include a pair of rebuilt turbochargers that have been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.  Dinan Rebuilt Turbos for BMW E89 Z4 (N54) includes: Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54) Dinan Rebuilt Rear Turbo for BMW E89 Z4 (N54) Core Program:  Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures we have a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores. Total Core Charge: $ 2,400.00 Special Note: Labor time is 13.2 hours to install each pair of turbochargers.  Models supported by Rebuilt Turbos E89 Z4 2009-2016 BMW Z4 sDrive35i Convertible 2011-2016 BMW Z4 sDrive35is Convertible Product Specifications: Labor Hours/Installation Hours 28.5000 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes Includes a pair of turbochargers that have been rebuilt and modified with a heavy duty wastegate pivot. Required Items Refer to BMW recommended procedure for gaskets & hardware that MUST be replaced during turbocharger installation. Dinan's kit can also be used (D313-0010). Emission Status Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Dinan Rebuilt Rear Turbo for BMW E89 Z4 (N54)(D310-0072) - 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Special Notes Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Requires corresponding rear turbo, D310-0073 to function properly. Add 1.9 hours to stated labor time when installing on xDrive vehicles. Dinan Rebuilt Rear Turbo for BMW E89 Z4 (N54)(D310-0072) - Requires corresponding front turbo, D310-0071 to function properly. Required Products Dinan Rebuilt Front Turbo for BMW E90/E92 335i (N54)(D310-0071) - Corresponding Rear turbo (D310-0073) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation. Dinan Rebuilt Rear Turbo for BMW E89 Z4 (N54)(D310-0072) - Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 320i / 328i / 330i 2012-2018   Instructions - d100-0909.pdf   Note: Not compatible with xDrive models or anything other than the sedan body style The Dinan Performance Spring Set for the F30 320i and 328i/330i (RWD) models is designed to enhance your BMW’s handling and stability while maintaining a smooth ride and improved stance. Dinan achieves this balance by combining increased spring stiffness with precision-engineered bump stops and spring perches, preserving suspension travel for a refined driving experience. Key Features: Lowered Stance : Lowers the vehicle by 3/4" in both front and rear, creating a more aggressive look and optimized suspension geometry. Increased Stiffness : Provides a 30% stiffer spring rate, reducing compression in the rear during acceleration and in the front under braking, leading to a more controlled, confident feel. Durable Construction : CNC-wound with high-tensile chrome silicon wire and shot-peened for stress relief, ensuring longevity without sagging. Reduced Body Roll : Significantly less body roll enhances steering response, noticeable from as low as 20 mph through top speeds. Compatibility : Compatible with both conventional and factory electronic shocks. Important Note : For optimal results, it’s recommended to install the Dinan Ride Quality and Handling Kit alongside the spring set. This pairing ensures the best ride quality, handling balance, and Dinan-standard performance. Claims related to ride quality or handling issues due to the omission of the handling kit are not covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725020198 Part Number D100-0909   Fitment Chart: Make Model Year BMW 320i 2012-2018 BMW 328i 2012-2016 BMW 330i 2017-2018

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW 535i ( F10 ) 2011-2016 Dinan engineers designed the F10 BMW 535i Free Flow Axle-Back Exhaust to enhance exhaust flow by reducing backpressure, which results in increased power output and a sportier sound. The exhaust delivers a refined tone during normal driving, while it becomes more aggressive under hard acceleration. To maintain a comfortable cabin environment, Dinan incorporated a Helmholtz chamber design that significantly reduces drone at low RPMs. This system is meticulously built from 100% 16-gauge 304 stainless steel , ensuring durability and corrosion resistance over time. The exhaust features twin 89mm (3.5") laser-engraved exhaust tips , available in polished stainless steel or ceramic black, for a high-performance aesthetic. Designed to fit seamlessly, it utilizes the factory brackets and hangers for straightforward installation. The factory computer-controlled exhaust valve is eliminated, optimizing airflow at all times. Key Features: Power Gains: +6 HP at 6600 RPM, +5 lb-ft of torque at 6600 RPM Helmholtz Chamber: Reduces drone for a more pleasant cabin experience Sound Profile: Louder and sportier, with a refined yet aggressive tone under acceleration Exhaust Tips: Twin 89mm (3.5") laser-engraved, available in polished or ceramic black finishes Material: 100% 16-gauge 304 stainless steel for superior corrosion resistance Fitment: Factory-like installation using OEM brackets and hangers   Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.4 Length 36 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 43 Width 24 UPC 813725023113 Part Number D660-0051-BLK Fitment Chart: Make Model Year BMW 535i (F10) 2011-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Carbon Fiber Intake Tube for BMW M3 2008-2013 Instructions for Part# D760-0024 Note:   This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The Dinan Carbon Fiber Intake Tube adds a touch of sophistication to your M3’s engine bay without altering performance. Constructed with high-quality carbon fiber and injection-molded rubber boots, this intake tube replaces the stock plastic intake tract, delivering a sleek, refined aesthetic to the engine compartment. Although it provides no power gains, this upgrade enhances the overall appearance under the hood, perfect for those who value style and quality craftsmanship. Key Features: Carbon Fiber Tube : Upgrades the stock plastic intake tract with a premium carbon fiber finish for a striking look. Injection-Molded Rubber Boots : Ensures a secure, reliable fit. Stock Compatibility : Retains the stock air filter for easy integration without performance modifications. Ideal for enthusiasts looking to elevate their M3’s engine aesthetics with a high-end, durable component. Brand Dinan Emission Code 1 Height 8 Labor Time (Hours) 1 Length 10 Product Type Cold Air Intake Weight 2 Width 10 UPC 813725023809 Part Number D760-0024 Fitment Chart: Make Model Year BMW M3 2008-2013

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 550i 2011-2016   Instructions - d100-0902.pdf   The Dinan Performance Spring Set for the F10 550i is crafted to enhance your vehicle's handling dynamics while maintaining a smooth, comfortable ride. By pairing calibrated spring rates with precision-engineered bump stops and spring perches, Dinan ensures improved suspension travel, optimizing mechanical grip and overall handling without compromising ride quality. Key Features: Lowered Stance : Reduces ride height by 1/2" in both front and rear, refining suspension geometry and adding an aggressive stance. Enhanced Spring Rates : Increases stiffness to minimize rear compression during acceleration and front compression (dive) during braking, boosting control and stability. Durable Build : CNC-wound with high-tensile chrome silicon wire, shot-peened, and preset to prevent sag over time. Improved Body Control : Significantly reduces body roll, enhancing steering responsiveness and grip at all speeds. Shock Compatibility : Works seamlessly with both conventional and factory electronic shocks. Important Note : For the best performance, it is recommended to pair the spring set with the Dinan Ride Quality and Handling Kit . This combination helps achieve the intended ride height, handling balance, and ride comfort. Claims related to ride quality or handling issues due to the exclusion of this kit are not covered under the warranty for product defects. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 10 Labor Time (Hours) 9.7 Length 14 Product Type Springs Weight 24 Width 14 UPC 813725020150 Part Number D100-0902   Fitment Chart: Make Model Year BMW 550i 2011-2016

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Mid-Pipe for BMW M240i 2017-2021 Instructions for Part# D660- 0068 Note:   Only confirmed to fit with the Dinan Free Flow Axle Back and stock exhaust systems. Fitment with other axle back units is not guaranteed. The Dinan High Flow Mid-pipe for the F22 M240i transforms the exhaust note into an aggressive, deep growl while enhancing airflow for better performance. This mid-pipe upgrade removes the factory center section, including both resonators, and replaces it with straight-through 3.25" T304 stainless steel tubing. This design not only improves sound and reduces exhaust backpressure but also results in a 3-pound weight reduction. Key Features: Enhanced Sound : Deletes both factory resonators for a powerful exhaust tone with an unmistakable growl. Increased Flow : Replaces the stock 80mm hydro-formed piping with 3.25" (82.6mm) mandrel-bent piping for improved flow dynamics. High-Quality Construction : Crafted from 100% T304 stainless steel, ensuring durability and longevity. Lightweight Design : Reduces overall weight by 3 lbs (stock 24 lbs, Dinan 21 lbs). Easy Installation : Bolt-on installation with included mounting hardware for a seamless fit. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 10 Labor Time (Hours) 2.5 Length 64 Product Type Mid-Pipe Weight 31 Width 19 UPC 813725023984 Part Number D660-0068 Fitment Chart: Make Model Year BMW M240i 2017-2021

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Anti-Roll Bar Set for BMW M5 2012-2016 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars are designed to enhance the handling dynamics of your BMW by significantly reducing body roll while maintaining an optimal level of comfort. These anti-roll bars are specifically tuned for each BMW chassis, ensuring that your vehicle remains level during cornering and provides a more planted and confident driving experience. Front Anti-Roll Bar Diameter: 28mm (compared to stock size of 24.5mm) Weight Savings: 44% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 35% to 53% stiffer than the stock bar 2-hole design allows for mounting in 3 different positions Installation: Comes with adjustable left and right-hand threaded end links for easy length adjustment Rear Anti-Roll Bar Diameter: 22mm (compared to stock size of 21.5mm) Weight Savings: 29% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 39% to 72% stiffer than the stock bar 3-hole design allows for mounting in 3 different positions using stock BMW end links Features: Construction: Tubular (hollow) design for lightweight performance without sacrificing strength Market Unique: The only tubular anti-roll bars with a large range of adjustment available Performance Benefits: Less Body Roll: Enhances cornering stability and control More Mechanical Grip: Improves traction, especially during aggressive driving Increased Stability: Provides confidence at the limit, enhancing overall driving experience Upgrade to Dinan's Lightweight Tubular Adjustable Anti-Roll Bars to experience a more responsive and dynamic ride, tailored specifically for your BMW chassis. This performance enhancement allows you to enjoy the thrill of driving while benefiting from improved handling characteristics. Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 3.2 Length 44 Product Type Sway Bar Weight 30 Width 10 UPC 813725020433 Part Number D120-0560   Fitment Chart: MAKE MODEL YEAR BMW M5 2012-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Polished Tips for BMW M5 ( F90 ) 2018-2023 The Dinan Free Flow Exhaust System for the BMW F90 M5 enhances the already remarkable performance of this luxury super sedan by transforming its exhaust note into a more aggressive and powerful symphony. The stock F90 M5 is known for its refined performance, but Dinan believes it deserves an exhaust note that fully matches its formidable capabilities. With this exhaust system, the M5 is given a louder and more aggressive tone without sacrificing comfort, drone control, or the refined character BMW drivers expect. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque at 6600 RPM. Refined Aggression: The exhaust note remains subdued during low-speed driving but becomes ferociously aggressive during hard acceleration, all while maintaining a drone-free cabin thanks to the retained computer-controlled exhaust valves . Larger Piping: The exhaust system uses 83mm tubing (compared to the stock 80mm), allowing for freer flow, which improves performance and sound. Improved Exhaust Flow: Dinan’s exhaust incorporates absorption and reactive technologies to reduce backpressure and optimize exhaust flow. Quad Exhaust Tips: The system features four 4" (102mm) double-walled, polished exhaust tips , which are clamp-on for easy customization or replacement. These tips fill the factory cut-outs for a striking, aggressive look, while maintaining Dinan's signature straight-cut design . Durable Construction: Built entirely from T304 stainless steel , the exhaust is TIG welded for superior craftsmanship and comes with a brushed finish for a sleek appearance out of the box. Customizable Sound: With the stock exhaust valve actuators reused, the exhaust tone can still be adjusted through the M-drive settings , allowing the driver to switch between refined and aggressive modes based on driving conditions. Larger Secondary Valves: The twin 76mm secondary exhaust valves (30% less restrictive than stock) further enhance flow and performance under load. Easy Installation: A simple bolt-on design with all necessary mounting hardware ensures ease of installation. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 13 Labor Time (Hours) 2.4 Length 50 Max HP Gain 10 @ 6600 RPM Max Torque (lb-ft) Gain 8 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Polished Weight 63 Width 34 UPC 813725025063 Part Number D660-0079     Fitment Chart: Make Model Year BMW M5 (F90) 2018-2023

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow X-Pipe for BMW M3 / M4 2015-2020 Instructions for Part# D660- 0060 Note:   Only confirmed to fit with the Dinan Free Flow Axle Back and stock exhaust systems. Fitment with other axle back units is not guaranteed. The Dinan High Flow X-Pipe for the F80/F82 M3/M4 brings an assertive, race-inspired exhaust sound that captures attention and embodies the M3/M4's performance legacy. Designed to deliver a balance of raw aggression and exotic tonal quality, this X-pipe uses Dinan's custom "X" crossover for optimal flow, inspired by the E9x M3 racing middle exhaust. The system replaces the factory center section (post-secondary catalytic converters) and removes the resonator, replacing it with free-flowing, 2.75" mandrel-bent T304 stainless steel tubing to improve both sound and airflow. Key Features: Aggressive Sound : Removes factory resonator, creating a deep, throaty tone with increased cabin noise. Enhanced Flow Design : Replaces stock 65mm tubing with 2.75" (70mm) mandrel-bent tubing, maximizing exhaust flow. Custom X-pipe crossover reduces restriction compared to standard stamped X-pipes. Durable Construction : Made from 100% T304 stainless steel for longevity and performance. Easy Installation : Bolt-on installation with included mounting hardware, OE-quality clamps, and flanges. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 10 Labor Time (Hours) 2 Length 54 Product Type Mid-Pipe Weight 17 Width 29 UPC 813725023892 Part Number D660-0060   Fitment Chart: Make Model Year BMW M3 2015-2018 BMW M4 2015-2020

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW 135i / 135is (E82/E88) 2008-2013 Dinan's Free Flow Axle-Back Exhaust for the 135i Coupe and Convertible enhances exhaust flow by reducing back pressure, resulting in increased power and a refined, sporty sound. The system is engineered to provide a balanced exhaust note that remains civilized during regular driving and becomes more aggressive during spirited acceleration. Crafted from 100% stainless steel, the exhaust is designed for durability and corrosion resistance. It reduces overall weight compared to the stock system and features stylish 3.5" polished stainless or ceramic black tips for a performance-oriented appearance. Installation is simple, utilizing factory hangers for a precise fit. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque @ 6600 RPM Drone Reduction: Advanced technologies to minimize cabin resonance Refined Sound: Louder, sportier tone under acceleration Aesthetic Tips: Dual 3.5" laser-engraved, polished or ceramic black exhaust tips Weight Reduction: Lighter than the stock exhaust system Durable Build: 100% 304 stainless steel for long-term corrosion resistance Easy Installation: Uses factory brackets and hangers for seamless fitment Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.1 Length 36 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Weight 32.5 Width 24 UPC 813725021584 Part Number D660-0025-BLK   Fitment Chart: Make Model Year BMW 135i 2008-2013 BMW 135is 2013

Description: Other manufacturer's shifters employ metal components which tend to be noisier and induce a notchy feel. The short-shifter is also rubber isolated for a solid feel and vibration free operation. Dinan's billet short-shifter has a 20% to 25% reduction in throw with a self-lubricating bearing for the ultimate in smooth short shifter technology. The kit effectively reduce the amount of throw necessary to make gear changes providing a sportier feel. It is s imple to install and zero maintenance. Larger BMW models with larger gear boxes require more leverage to make the gear changes, which is why BMW employs different shift handle configurations for various applications.   Dinan short shifters are application specific as well in order to achieve an appropriate reduction of throw, providing the associated benefits without making the desired gear difficult to locate or require disproportionate effort; a common complaint with other manufacturers' short-shift kits where a ''one size fits all'' approach is common. In addition, Dinan's short-shifters retain the nylon pivot ball and shifter bushing, which provides the same smooth and quiet operation as the original shifter. Benefits: • A precise 20-25% throw reduction • Counter balanced to reduce effort  • Two piece 416 Stainless Steel & Aluminum Stick assembly  • Two piece stick provides vibration free operation  • Dampened pivot cup with self lubricating pivot ball  • Polymer Iglide T-500 lower pivot bushings Special Note: Not for xDrive vehicles.   128i fitment is limited to 2008-2010 model years ONLY Models supported by D550-1005 2008-2010 BMW 135i 2007-2011 BMW 328i 2007-2010 BMW 335i 2004-2007 BMW 530i 2006-2010 BMW 550i 2006 BMW 325i 2006-2007 BMW 330i 2011-2013 BMW 335is 2004-2006 BMW 545i Product Specifications: Labor Hours/Installation Hours 1.10 Included Notes Short-Shift Handle and bushing.

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Intercooler with M-Tech Bumper for BMW 335i 2007-2010 Instructions for Part# D330-0013 The Dinan High-Performance Intercooler offers a significant boost in power and cooling efficiency, featuring a 93% increase in total volume . This upgrade minimizes pressure drop by 0.7 psi , enhancing heat exchange and reducing cool-down times, which helps maintain full power during various driving conditions, including stop-and-go traffic. It is designed as a direct replacement for the stock intercooler, requiring only minor modifications for a seamless installation. With larger connector tubing and custom shrouding , the intercooler maximizes airflow efficiency. When paired with Stage 2 Performance Engine Software , it delivers an additional 5 horsepower and ensures more consistent performance. The enhanced thermal efficiency also improves turbocharger reliability. Additionally, the intercooler can be used with the Dinan Oil Cooler and Stage 3 Engine Software to take full advantage of the increased boost pressure and improved cooling. Dyno results for a vehicle equipped with Stage 3 engine software, Dinan Intercooler, Dinan Oil Cooler, and Free Flow Exhaust indicate peak output of 398 HP @ 5700 RPM and 429 lb-ft of torque @ 4300 RPM . Key Features: 93% increase in total volume for improved cooling performance. 0.7 psi reduction in pressure drop for optimized airflow. Direct replacement with minimal modifications for clean, factory-like installation. Includes custom shrouds to direct air efficiently and avoid spillage. Larger connector tubing for maximum cooling efficiency. Produces an additional 5 horsepower with Stage 2 Performance Engine Software. Improves turbocharger reliability through enhanced thermal management. Can be paired with Dinan Oil Cooler and Stage 3 Engine Software for optimal performance. Peak power output : 398 HP and 429 lb-ft of torque with Stage 3 engine software and upgrades. Brand Dinan Clearance Category Engine Dinan Point Value 2 Emission Code 1 Height 9 Labor Time (Hours) 4 Length 33 Peak HP 398 @ 5700 RPM Peak Torque (lb-ft) 429 @ 4300 RPM Product Type Intercooler Weight 25.9 Width 16 UPC 813725020952 Part Number D330-0013   Emissions This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles 1968 and newer U.S. manufactured Federally Certified vehicles 1968 and newer Foreign manufactured vehicle Fitment Chart: Make Model Year BMW 335i 2007-2010 BMW 335i xDrive 2009-2010 BMW 335xi 2007-2008

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Polished Tips for BMW M240i (F22/F23) 2017-2021 Special Note:  Factory computer-controlled exhaust valve is eliminated. Dinan's Free Flow Axle-Back Exhaust System for the F22/F23 BMW M240i is engineered to boost performance by optimizing exhaust flow and reducing back pressure, resulting in gains of +6 HP and +5 lb-ft of torque at 6600 RPM . The exhaust system delivers a refined yet sporty sound, remaining civilized during everyday driving but becoming pleasantly aggressive under hard acceleration. It also features intoxicating burbles and pops to enhance the driving experience. A Helmholtz chamber is integrated into the design to eliminate drone at low RPM, making for a more comfortable cabin experience. Built from 100% 16-gauge 304 stainless steel , the exhaust system is designed to last, resisting corrosion while offering a factory-like fit with the use of existing hangers and brackets. The system's twin 89mm (3.5") polished or ceramic black tips add a tasteful, high-performance aesthetic to the vehicle. Key Features: Power Gains: +6 HP and +5 lb-ft of torque at 6600 RPM Helmholtz Chamber: Reduces drone at low RPM for a quieter cabin Sound Profile: Louder, sportier sound with additional burbles and pops Exhaust Tips: Twin 89mm (3.5") laser-engraved tips in polished or ceramic black finish Material: 100% 16-gauge 304 stainless steel for durability and corrosion resistance Fitment: Uses factory brackets and hangers for an easy installation Exhaust Valve: Eliminates the factory computer-controlled valve for a consistent, sporty exhaust note Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.3 Length 50 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Tip Finish Polished Weight 45 Width 34 UPC 813725023960 Part Number D660-0067   Fitment Chart: Make Model Year BMW M240i 2017-2021

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW 135i / 135is (E82/E88) 2008-2013 Dinan's Free Flow Axle-Back Exhaust for the 135i Coupe and Convertible enhances exhaust flow by reducing back pressure, resulting in increased power and a refined, sporty sound. The system is engineered to provide a balanced exhaust note that remains civilized during regular driving and becomes more aggressive during spirited acceleration. Crafted from 100% stainless steel, the exhaust is designed for durability and corrosion resistance. It reduces overall weight compared to the stock system and features stylish 3.5" polished stainless or ceramic black tips for a performance-oriented appearance. Installation is simple, utilizing factory hangers for a precise fit. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque @ 6600 RPM Drone Reduction: Advanced technologies to minimize cabin resonance Refined Sound: Louder, sportier tone under acceleration Aesthetic Tips: Dual 3.5" laser-engraved, polished or ceramic black exhaust tips Weight Reduction: Lighter than the stock exhaust system Durable Build: 100% 304 stainless steel for long-term corrosion resistance Easy Installation: Uses factory brackets and hangers for seamless fitment Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.1 Length 36 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Weight 32.5 Width 24 UPC 813725021584 Part Number D660-0025-BLK   Fitment Chart: Make Model Year BMW 135i 2008-2013 BMW 135is 2013

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Anti-Roll Bar Set for BMW M2 / M3 / M4 2015- 2021 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars are specifically engineered to enhance the performance and handling of your BMW, providing significant improvements in grip, stability, and driver confidence. Unlike the overly soft factory-installed anti-roll bars designed for comfort, Dinan’s bars are finely tuned for each chassis, effectively reducing body roll and optimizing mechanical grip for a more controlled and planted feel in every corner. Front Anti-Roll Bar Diameter: 32mm (compared to stock size of 24.7mm) Adjustability: Can be adjusted from 57% to 103% stiffer than the stock bar, allowing for tailored performance to meet your driving style Design: 4-hole configuration with 7 different mounting positions for extensive customization Supplied adjustable end links ensure a perfect fit and easy installation Rear Anti-Roll Bar Diameter: 24mm (compared to stock size of 22.9mm) Adjustability: Can be adjusted from 0% to 13% stiffer than the stock bar, enabling subtle tuning for improved handling dynamics Design: 3-hole configuration with 3 possible mounting positions using stock BMW end links Features: Tubular Construction: Both bars feature a hollow design, making them lighter without compromising strength Market Leader: Dinan's tubular anti-roll bars are unique in offering a wide range of adjustability Performance Benefits: Less Body Roll: Keeps your BMW more level during cornering, enhancing control More Mechanical Grip: Increases traction and handling capabilities, particularly during aggressive driving Greater Stability: Provides a more confident driving experience at the limit Upgrade your BMW's suspension with Dinan's Lightweight Tubular Adjustable Anti-Roll Bars for a performance enhancement that strikes the perfect balance between comfort and responsiveness. Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 7 Length 44 Product Type Sway Bar Weight 30 Width 10 UPC 813725022710 Part Number D120-0605 Fitment Chart: MAKE MODEL YEAR BMW M2 2016-2021 BMW M3 2015-2018 BMW M4 2015-2020

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System for BMW 750i (G11/G12) 2016-2019 Dinan's Free Flow Axle-Back Exhaust System for the BMW 750i is designed to improve performance by increasing exhaust flow and reducing back pressure, which leads to gains of +8 HP and +6 lb-ft of torque at 6600 RPM . This system delivers a sporty, aggressive sound under hard acceleration while remaining civilized for daily driving. The exhaust's computer-controlled valves retain the factory functionality, limiting noise during low-speed driving and opening fully under high-load conditions to enhance performance and sound. One of the standout features of this system is the Helmholtz chamber design, which helps to reduce low-RPM drone , ensuring a quiet cabin experience even with the enhanced sound profile. The system has a stealthy design , as it utilizes the stock rear bumper cutouts without aftermarket exhaust tips, maintaining the elegant styling of the luxury sedan. Constructed from 100% 16-gauge 304 stainless steel , the exhaust system is designed for long-term durability and corrosion resistance. The system is also easy to install , thanks to a bolt-on design that uses the factory hangers and includes mounting hardware for a seamless fit. Key Features: Power Gains: +8 HP and +6 lb-ft of torque at 6600 RPM Drone Reduction: Incorporates Helmholtz chamber for reduced cabin resonance Sound Profile: Louder, sportier sound with computer-controlled valves for refined noise control Stealth Design: Exhaust exits through stock cutouts, preserving the sedan’s elegant appearance Material: 100% 304 stainless steel construction for durability and corrosion resistance Installation: Simple bolt-on design with included mounting hardware, using factory brackets and hangers Brand Dinan Dinan Point Value 3 Emission Code 5 Height 16 Labor Time (Hours) 2.6 Length 66 Max HP Gain 8 @ 6600 RPM Max Torque (lb-ft) Gain 6 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Weight 60 Width 30 UPC 813725024622 Part Number D660-0072 Fitment Chart: Make Model Year BMW 750i 2016-2019 BMW 750i xDrive 2016-2019 BMW 750Li xDrive 2016-2019

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for BMW 328d / 335d / X5 2009-2018  FOR BMW M57/N47 Diesel Engines Instructions for Part# D440-0045 The DINANTRONICS Sport offers a powerful boost control solution that enhances performance for BMW models with M57 and N47 engines. It's designed for easy installation, seamless operation, and the flexibility of user-controlled settings via Bluetooth, making it accessible and enjoyable for all driving styles. With instant gains in horsepower and torque, you’ll feel a noticeable difference in performance right away. Maximum Gains: M57 Engine: Up to +40 HP and +70 lb-ft of torque. N47 Engine: Up to +30 HP and +50 lb-ft of torque. Key Features: Bluetooth Smart Compatibility: Available for Android and iOS (except Android OS 8.0 "Oreo" & OS 14.0). User-Controlled Power Settings: Options include Sport, Sport+, and Race modes. Valet / Parental Control Modes: Ability to reduce boost by -3 PSI . Live Boost Monitoring: Real-time boost data through the app, resembling the sport gauges on iDrive (Note: Diesel applications show fuel pressure instead of boost). Easy Installation: Quick, single-sensor plug-in installation/removal. Automatic Engine Detection: Automatically adjusts for the correct engine mapping. Wide Application Compatibility: One unit fits a range of vehicles for added convenience. Warranty and Notes: 1-Year Product Warranty: Covers product only, excluding consequential damages or labor reimbursement. CARB EO Pending: 14-day satisfaction guarantee. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +40 Max Torque (lb-ft) Gain Up to +70 Product Type Inline Module Weight 1.5 Width 6 UPC 813725023748 Part Number D440-0045 Fitment Chart: Make Model Year BMW 328d 2014-2018 BMW 328d xDrive 2014-2018 BMW 335d 2009-2011 BMW X5 2009-2015

DESCRIPTION: Suspension systems that not only transform the stance of the vehicle but also maintain ride quality and improve upon handling are what Dinan suspensions are known for. This is accomplished by pairing springs sets with bump stops, spring perches or both to maintain suspension travel resulting in a smooth ride while also improving mechanical grip and handling. This is what makes Dinan suspension systems unique. While we are able to sell each component separately it is highly recommend that both the spring sets and the supplemental ride quality and handling kits are used in tandem in order to maintain the Dinan quality standards our customers are used to. Experience the Dinan difference with this combination and enjoy the ride it provides. Dinan's Performance Spring set for the G30 M550i provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the M550i by a 3/4" in the front and rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 15% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph, up to the top speed of the vehicle. FEATURES: Maximum Outside Diameter: 4.66" Front | 4.42" Rear Spring Rate: 446 LB/IN Front| 245 LB/IN Rear Spring Material: High Tensile Chrome Silicon Free Height: 11.1" Front | 12.25" Rear Wire Diameter: 0.593" Front | 0.485" Rear Maximum Inside Diameter: 3.47" Frong | 3.45" Rear Spring Color: Blue PRODUCTS SPECS: Included Notes 2 front springs, 2 rear springs Required Items Highly Recommended: D193-3071 - Supplemental Ride Quality & Handling Kit for BMW G30 M550i (see product description for details NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. VEHICLE FITMENT: 2018-2023 M550i G30 NOTE: Images are for representation purpose only and may differ depending on application.

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M3 (E46) 2001-2006 The Dinan Free Flow Axle-Back Exhaust for the BMW M3 is designed to meet the high-performance demands of M3 owners by delivering enhanced power, a weight reduction, and an aggressive, sporty exhaust note. Below are the highlights of this high-performance exhaust system: Key Features: Performance Gains: Power Increase: +7 HP @ 8000 RPM +5 LB-FT @ 5000 RPM (with software) Reduced Backpressure for Improved Flow: Dinan's unique muffler design optimizes exhaust flow, which translates into measurable power gains and a more responsive engine. Weight Reduction: The Dinan exhaust system is 15 lbs lighter than the stock system, weighing 43 lbs compared to the 58 lbs of the stock exhaust. Durable Construction: Made entirely from 304 stainless steel , the exhaust system is highly resistant to corrosion and engineered for longevity, even under aggressive use. Aggressive Aesthetic: Features quad 3-inch black ceramic-coated tips , laser engraved with the Dinan logo. These tips add a sleek, aggressive look that perfectly complements the M3’s performance profile. Throaty Exhaust Note: Delivers a sporty, deep exhaust tone that amplifies the driving experience, yet retains enough refinement to avoid being overly loud in daily driving conditions. Drone Abatement Technologies: Designed to minimize unwanted exhaust drone inside the cabin, allowing for a comfortable driving experience even at lower RPMs. Factory-Like Fitment: Utilizes the factory brackets and hangers for an easy installation, ensuring a seamless fit without the need for modifications. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.1 Length 48 Max HP Gain 7 @ 8000 RPM Max Torque (lb-ft) Gain 5 @ 5000 RPM Product Type Axle-Back Exhaust Weight 58.6 Width 30 UPC 813725021935 Part Number D660-4604   Fitment Chart: Make Model Year BMW M3 2001-2006

Description: High performing rear replacement turbo with the engineering and reliability expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement. Our rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.   Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Models supported by D310-0072 2009 BMW Z4 sDrive35is Convertible Product Specifications: Labor Hours/Installation Hours 15.00 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

Description: High performing rear replacement turbo with the engineering and reliability expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement. Our rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.   Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Models supported by D310-0072 2011 BMW 1M 2008-2010 BMW 135i 2009-2016 BMW Z4 Product Specifications: Labor Hours/Installation Hours 13.20 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email: Online@AutoTalent.com Dinan Lower Control Arm Monoball Kit for BMW 2 Series / 3 Series / 4 Series 2012-2021 Instructions for Part# D280-0014 Note: Not compatible with xDrive vehicles. The Dinan Monoball Kit is engineered to enhance steering responsiveness and precision by replacing stock rubber bushings in the thrust arms with high-quality precision ball joints and machined aluminum housings. This upgrade minimizes the deflection found in rubber bushings, resulting in sharper handling and a reduction in brake shimmy during deceleration. Built for everyday usability, Dinan’s kit uses nylon-lined bearings known for their quiet operation, making it a practical choice for both daily drivers and performance enthusiasts. The kit also includes sealed bearings with rubber boots, protecting the components from dirt and road grime to ensure long-lasting durability. Key Features: Enhanced Steering Response : Reduces deflection from rubber bushings, providing more direct steering feedback. Reduced Brake Shimmy : Maintains stability under braking by minimizing unwanted movement in the thrust arms. Quiet Nylon-Lined Bearings : Designed to operate quietly, making the upgrade suitable for daily use. Machined Aluminum Housings : High-quality aluminum construction for durability and precision. Sealed Bearings with Rubber Boots : Protects against dirt and road grime, preventing premature wear. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 3 Labor Time (Hours) 1.8 Length 6 Product Type Monoballs Weight 4 Width 6 UPC 813725020129 Part Number D280-0014   Fitment Chart: Make Model Year BMW 228i 2014-2016 BMW 230i 2017-2021 BMW 320i 2013-2018 BMW 328i 2012-2016 BMW 330i 2017-2018 BMW 335i 2012-2015 BMW 340i 2016-2018 BMW 428i 2014-2016 BMW 430i 2017-2020 BMW 435i 2014-2016 BMW 440i 2017-2020 BMW M235i 2014-2016 BMW M240i 2017-2021

For any questions please PM or email: Online@AutoTalent.com Dinan Anti-Roll Bar Set for BMW 320i / 328i / 330i / 335i / 340i 2012-2018 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars for both the front and rear are designed to significantly reduce body roll, improve grip, and increase stability, all while saving weight. These anti-roll bars are precision-tuned for each BMW chassis and allow for a range of stiffness adjustments to meet your driving needs. They are ideal for those looking to improve handling and mechanical grip without sacrificing comfort, providing a more planted and confident driving experience. Front Anti-Roll Bar Features: Size: 28mm (compared to stock sizes ranging from 21.2mm to 24.2mm) Adjustable from 45% to 97% stiffer than the stock bar, depending on the application 3 adjustment positions for fine-tuning Tubular construction for reduced weight Designed to work with stock BMW end links Rear Anti-Roll Bar Features: Size: 19mm (compared to stock sizes ranging from 12mm to 15mm) Adjustable from 84% to 474% stiffer than the stock bar, depending on the application 3 adjustment positions for easy tuning Tubular construction for weight savings Compatible with stock BMW end links General Benefits: Reduces body roll for enhanced cornering Increases mechanical grip and stability at the limit Improves handling without compromising ride quality Allows for customization of suspension stiffness to match driving style   Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 7.1 Length 40 Product Type Sway Bar Weight 30 Width 10 UPC 813725022765 Part Number D120-0585   Fitment Chart: MAKE MODEL YEAR BMW 320i 2013-2018 BMW 328i 2012-2016 BMW 330i 2017-2020 BMW 335i 2012-2015 BMW 340i 2016-2018

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 228i / 230i / 428i / 430i 2014-2021   Instructions for Part# D100-0928 Note: Not compatible with xDrive models, the 228i/230i convertible or the 428i/430i convertible and gran coupe. The Dinan Performance Spring Set for the F22 228i/230i (RWD) and F32 428i/430i (RWD) delivers a refined blend of aesthetics, improved handling, and ride quality. By carefully calibrating spring rates and lowering the vehicle, this upgrade enhances suspension geometry, reduces body roll, and increases driver confidence at any speed. Key Features: Lowered Ride Height : F22 228i/230i (RWD) : Lowered by 1/2 inch in both the front and rear. F32 428i/430i (RWD) : Lowered by 5/8 inch in the front and 3/4 inch in the rear. The reduced ride height results in an aggressive stance and better suspension geometry. Increased Spring Stiffness : F22 228i/230i : 50% stiffer springs . F32 428i/430i : 41% increase in the front and 29% increase in the rear . This reduces compression under acceleration and braking, providing better stability and control. Enhanced Handling : Reduced body roll improves cornering dynamics, steering responsiveness, and overall road feel. Noticeable improvements in grip for high-speed situations, inspiring confidence in the car’s capabilities. Durable Construction : CNC-wound using high tensile chrome silicon wire . Shot-peened for stress relief , ensuring long-lasting performance with no sag. Versatile Compatibility : Works with both conventional and factory electronic shocks , offering flexibility across setups. Important Note: For the best results, Dinan recommends pairing the spring set with the corresponding Ride Quality and Handling Kit . This combination ensures the advertised performance, ride height, and ride quality. While not mandatory, skipping this kit may result in diminished performance or comfort, which will not be covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725023625 Part Number D100-0928   Fitment Chart: Make Model Year BMW 228i 2014-2016 BMW 230i 2017-2021 BMW 428i 2014-2016 BMW 430i 2017-2021

For any questions please PM or email: Online@AutoTalent.com Dinan Anti-Roll Bar Set for BMW 320i / 328i / 330i / 335i / 340i (xDrive) 2012-2018  Dinan's Lightweight Tubular Adjustable Anti-Roll Bars for xDrive models are designed to reduce body roll, improve grip, and enhance overall stability, while also saving weight. These anti-roll bars are tailored specifically to each BMW chassis, offering a significant increase in stiffness for improved handling and cornering stability. Their adjustability allows drivers to fine-tune the suspension setup for optimal performance, providing a much more confident and planted driving experience in every corner. Front Anti-Roll Bar Features (xDrive): Size: 25mm (stock sizes range from 22.5mm to 23.6mm) Adjustable from 45% to 93% stiffer than the stock front sway bar, depending on the application 3 adjustment positions for customizable stiffness Tubular construction for weight savings Compatible with stock BMW end links Rear Anti-Roll Bar Features: Size: 19mm (compared to the stock 12mm bar) Adjustable from 359% to 474% stiffer than the stock rear sway bar 3 adjustment positions for fine-tuning Tubular construction for a lightweight design Works with stock BMW end links Key Benefits: Drastically reduces body roll for more level cornering Improves mechanical grip and stability at the limit Enhances overall handling and responsiveness Lightweight construction reduces unsprung weight Provides adjustable stiffness to match individual driving preferences Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 7.4 Length 40 Product Type Sway Bar Weight 30 Width 10 UPC 813725022772 Part Number D120-0595 Fitment Chart: MAKE MODEL YEAR BMW 320i xDrive 2013-2018 BMW 328i xDrive 2013-2016 BMW 330i xDrive 2017-2018 BMW 335i xDrive 2013-2015 BMW 340i xDrive 2016-2018

For any questions please PM or email: Online@AutoTalent.com Dinan 17mm Adjustable Rear Anti-Roll Bar for BMW 5-Series 1997-2003 The 17mm Adjustable Rear Antiroll Bar offers enhanced handling performance for those looking to improve their vehicle’s stability and grip in phases. This component is designed to reduce body roll and provide more predictable cornering behavior, especially under high-load conditions. Features: Adjustability : The bar offers 3 positions, allowing you to fine-tune the suspension stiffness to suit your driving style and performance needs. Less Body Roll : By reducing body roll, the car remains flatter through corners, improving overall handling and driver confidence. More Mechanical Grip : The antiroll bar increases mechanical grip by optimizing weight distribution, allowing tires to maintain better contact with the road surface. Improved Stability : With better control at the limit, the car feels more stable and composed during aggressive driving or when cornering at high speeds. This antiroll bar is perfect for enthusiasts who want to enhance handling dynamics, making the car more responsive and stable on both road and track. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 6 Labor Time (Hours) 1 Length 42 Product Type Sway Bar Weight 9.7 Width 16 UPC 813725020341 Part Number D120-0380 Fitment Chart: MAKE MODEL YEAR BMW 540i 1997-2003 BMW 525i 2001-2003 BMW M5 2000-2003 BMW 528i 1997-2000 BMW 530i 2001-2003

Dinan Supplemental Ride Quality & Handling Kit for BMW E70 X5M E71 X6M Special Note:   Installation labor time varies. 8.3 hrs for E70 X5 M and 8.5 for E71 X6 M. Installation labor time will be negligible if installed at the same time as the corresponding Dinan Spring Set. Product Description Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.   NOTICE:   Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. Models Supported by Dinan Supplemental Ride Quality & Handling Kit for BMW E70 X5M E71 X6M 2010-2013 X5 M E70  2010-2014 X6 M E71  Product Specifications Included Notes 2 front bump stops, 2 rear bump stops Required Items Highly Recommended:   D100-0915 - Performance Spring Set for BMW E70 X5 M E71 X6 M (see product description for details).

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Throttle Body for BMW 545i / 645ci / 745i / X5 2002-2006 Instructions for Part# D760-3600A   Note: Not compatible with the X5 4.4i (E53) from 2000-2003, Stage 3 Engine Software recommended for optimum performance and drivability. The Dinan High Flow Throttle Body for Valvetronic engines is engineered to improve performance by reducing intake air-flow restriction, allowing the engine to breathe more freely. Despite the presence of a throttle body in Valvetronic engines, it operates differently, primarily assisting with traction control and functioning as a "safety valve." Dinan’s larger-bore throttle body enhances airflow most effectively in wide-open throttle conditions, boosting horsepower and torque when paired with Dinan engine software. Features: Increased Power Output : E60 545i & E63/E64 645Ci : +5 HP @ 6500 RPM, +4 LB-FT @ 5500 RPM (with engine software) E65/E66 745i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) 2004-06 E53 X5 4.4i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) E53 X5 4.8is : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) Improved Throttle Response : Enhances engine responsiveness for a more dynamic driving experience. Larger Bore : Expanded by 3mm for an 8% increase in air flow area, optimizing intake efficiency and power potential. Brand Dinan Clearance Category Air and Fuel Delivery Dinan Point Value 2 Emission Code 1 Labor Time (Hours) 0.8 Max HP Gain 5 - 8 (Depending on application) Max Torque (lb-ft) Gain 4 - 8 (Depending on application) Product Type Throttle Body Sale Category Throttle Bodies Weight 6 UPC 813725028415 Part Number D760-3600A   Fitment Chart: Make Model Year BMW 545i 2004-2006 BMW 645ci 2004-2005 BMW 745i 2002-2005 BMW 745Li 2002-2005 BMW X5 2004-2006

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW M235i / M240i (xDrive) 2015-2021   Instructions for Part# D100-0927 Note: Not compatible with RWD models or the M235i/M240i convertible. The Dinan Performance Spring Set for the F22 M235i/M240i (xDrive) is engineered to enhance both handling and aesthetics, delivering a lower, more aggressive stance while improving grip and reducing body roll. These springs maintain Dinan’s renowned balance of improved performance and ride quality, making them an ideal upgrade for spirited drivers. Key Features: Lowered Ride Height : Front : Lowered by 1/2 inch . Rear : Lowered by 5/8 inch . The lower stance improves suspension geometry and contributes to a more aggressive aesthetic. Increased Spring Stiffness : 10% stiffer in the front , and 15% stiffer in the rear . Enhances handling by reducing rear suspension compression during acceleration and front dive during braking. Reduced Body Roll : Significant reduction in body roll improves steering responsiveness and cornering stability, enhancing confidence at both low and high speeds. Improved Grip : These springs provide a noticeable improvement in mechanical grip, making the car more composed and predictable during high-speed driving or track days. Durable Construction : Constructed from CNC-wound high tensile chrome silicon wire . Shot-peened for stress relief , ensuring durability and preventing sag over the lifetime of the vehicle. Compatibility : Works with both conventional shocks and factory electronic shocks , offering flexibility for various setups. Important Note: To achieve optimal ride height, handling, and ride quality, Dinan highly recommends pairing the spring set with the matching Ride Quality and Handling Kit . Failure to do so may lead to suboptimal results in ride quality or handling characteristics, which are not covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725022734 Part Number D100-0927   Fitment Chart: Make Model Year BMW M235i xDrive 2015-2016 BMW M240i xDrive 2017-2021

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M3 (E92/E93) 2008-2013 Dinan, a leader in BMW aftermarket performance, offers a meticulously engineered Free Flow Axle-Back Exhaust system, embodying the brand's commitment to "Performance Without Sacrifice." With a track record of winning consecutive Rolex Series Daytona Prototype racing championships and powering Chip Ganassi Racing's 2013 24 Hours of Daytona win, Dinan’s expertise in power and durability is well-established. This same technological prowess is applied to their exhaust systems, delivering an unmatched balance of performance, sound quality, and everyday drivability. Dinan’s exhaust utilizes advanced features such as a Helmholtz chamber , designed to eliminate drone at light throttle cruise, and a straight-through single pipe design that enhances flow while reducing unwanted noise. The result is a sporty, aggressive sound at wide-open throttle, while remaining refined and quiet during casual driving. This exhaust is engineered to complement the refinement of your BMW without compromising its core characteristics. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque @ 6800 RPM Helmholtz Chamber: Reduces unwanted drone for a comfortable driving experience Single-Channel Design: Maximizes flow while minimizing noise at low throttle Aggressive Sound: Louder and sportier at full throttle, yet civilized at cruise Quad 3" Tips: Black ceramic coated, laser engraved exhaust tips for a sleek, aggressive look Weight Savings: 10 lbs lighter than the stock exhaust system Durable Construction: 100% 304 stainless steel, ensuring corrosion resistance and longevity Easy Installation: Uses factory brackets and hangers for seamless fitment Warranty: Backed by a 4-year/50,000-mile new car matching warranty, twice as long as typical competitor warranties With Dinan's technology, you get an exhaust that enhances power and sound while maintaining the refinement expected from a BMW. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 15 Labor Time (Hours) 1.6 Length 63 Max HP Gain 6 @ 6800 RPM Max Torque (lb-ft) Gain 5 @ 6800 RPM Product Type Axle-Back Exhaust Weight 72 Width 18 UPC 813725021607 Part Number D660-0027   Fitment Chart: Make Model Year BMW  M3 (E92/E93)  2008-2013

For any questions please PM or email:  Online@AutoTalent.com Dinan Performance Spring Set for BMW 435i / 440i 2014-2020   Instructions for Part# D100-0921 Special Note: Not compatible with xDrive models or the 435i/440i convertible. The Dinan Performance Spring Set for the F32/F36 435i/440i (RWD) provides significant improvements in handling, ride quality, and the vehicle's stance. Here’s a breakdown of the features and benefits: Key Features: Lowered Ride Height : F32 (Coupe) : The vehicle is lowered by 1" in the front and rear. F36 (Gran Coupe) : The vehicle is lowered by 3/4" in the front and rear. This lowered stance not only enhances the vehicle's aggressive look but also improves suspension geometry for better handling. Increased Spring Stiffness : F32 (Coupe) : The spring stiffness is increased by 50% in both the front and rear. F36 (Gran Coupe) : The spring stiffness is increased by 34% in the front and 11% in the rear. These increases in spring stiffness reduce suspension compression under acceleration (rear) and braking (front), enhancing control and reducing body movement. Reduced Body Roll : A significant reduction in body roll makes the vehicle feel more stable and responsive to steering input, improving cornering performance. This also enhances the car’s agility and control at all speeds. Improved Grip : The performance springs result in a noticeable improvement in grip , especially in high-speed driving situations. This allows for more confidence in the car’s handling during aggressive driving. Durable Construction : The springs are CNC wound from high tensile chrome silicon wire and shot-peened to relieve stress, ensuring long-term durability and preventing sag over time. Compatibility : The Dinan Performance Spring Set is compatible with both conventional and factory electronic shocks , making it a versatile option for owners of the F32/F36 435i/440i (RWD). Important Note: For optimal results, Dinan recommends installing the matching Ride Quality and Handling Kit alongside the Performance Spring Set. This ensures that the advertised ride height, performance, and ride quality are achieved. While not strictly required, installing only the spring set without the corresponding handling kit may result in suboptimal ride quality and handling characteristics. Any claims regarding improper handling or ride quality resulting from this mismatch will not be covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725020310 Part Number D100-0921 Fitment Chart: Make Model Year BMW 435i 2014-2016 BMW 440i 2017-2020

Special Note:   Installation labor time varies based on drivetrain. 7.8 hrs for RWD and 8.1 for xDrive     Product Description Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.   NOTICE:   Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. Models Supported by Dinan Supplemental Ride Quality & Handling Kit for BMW F30 335i & xDrive 2012-2015 335i  & xDrive F30 Sedan  Product Specifications Included Notes 2 front bump stops, 2 rear bumpstops Required Items Highly Recommended:   D100-0912 - Performance Spring Set for BMW F30 335i xDrive or D100-0910 - Performance Spring Set for BMW F30 335i (see product description for details)

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M240i (F22/F23) 2017-2021 Special Note:  Factory computer-controlled exhaust valve is eliminated. Dinan's Free Flow Axle-Back Exhaust System for the F22/F23 BMW M240i is engineered to boost performance by optimizing exhaust flow and reducing back pressure, resulting in gains of +6 HP and +5 lb-ft of torque at 6600 RPM . The exhaust system delivers a refined yet sporty sound, remaining civilized during everyday driving but becoming pleasantly aggressive under hard acceleration. It also features intoxicating burbles and pops to enhance the driving experience. A Helmholtz chamber is integrated into the design to eliminate drone at low RPM, making for a more comfortable cabin experience. Built from 100% 16-gauge 304 stainless steel , the exhaust system is designed to last, resisting corrosion while offering a factory-like fit with the use of existing hangers and brackets. The system's twin 89mm (3.5") polished or ceramic black tips add a tasteful, high-performance aesthetic to the vehicle. Key Features: Power Gains: +6 HP and +5 lb-ft of torque at 6600 RPM Helmholtz Chamber: Reduces drone at low RPM for a quieter cabin Sound Profile: Louder, sportier sound with additional burbles and pops Exhaust Tips: Twin 89mm (3.5") laser-engraved tips in polished or ceramic black finish Material: 100% 16-gauge 304 stainless steel for durability and corrosion resistance Fitment: Uses factory brackets and hangers for an easy installation Exhaust Valve: Eliminates the factory computer-controlled valve for a consistent, sporty exhaust note Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.3 Length 50 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Tip Finish Black Ceramic Coated Weight 45 Width 34 UPC 813725023977 Part Number D660-0067-BLK Fitment Chart: Make Model Year BMW M240i 2017-2021

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Carbon Fiber Intake for BMW M3 2008-2013 Instructions for Part# D760-0028 Note:   This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA .   The Dinan High Flow Carbon Fiber Intake for the BMW E9x M3 is designed to enhance engine performance and aesthetics by maximizing airflow and minimizing heat. Built from high-quality prepreg carbon fiber and injection-molded rubber boots, this intake system efficiently insulates against under-hood temperatures. The intake is fitted with a Dinan-designed injection-molded divider plate, which tightly seals the system and integrates a high-flow passage to the stock airbox housing. This design provides a 30% increase in cross-sectional area, optimizing airflow and helping the engine breathe easier for greater power output. Key Features: Performance Gains : +8 HP and +5 lb-ft of torque at 8200 RPM. Enhanced Insulation : Carbon fiber and plastic construction resist heat better than metal alternatives, reducing heat soak and allowing the system to cool rapidly after intense driving. Increased Airflow : 30% more cross-sectional area than stock, providing more air to the M3’s V8 engine. High-Flow Filter : Supports maximum intake flow for improved engine performance across the power band. Aesthetic Upgrade : Aircraft-quality carbon fiber intake tube provides a striking appearance under the hood. This intake system is a premium choice for M3 enthusiasts looking for both power gains and a high-end visual upgrade to their engine bay. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 9 Labor Time (Hours) 1 Length 14 Max HP Gain 8 Max Torque (lb-ft) Gain 5 Product Type Cold Air Intake Weight 5.2 Width 14 UPC 813725022055 Part Number D760-0028   Fitment Chart: Make Model Year BMW M3 2008-2013

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M235I ( F22 ) 2014-2016 | M-Performance Special Note:   For vehicles WITH the M-Performance rear valance Dinan's Free Flow Axle-Back Exhaust for the F22 BMW M235i is expertly engineered to enhance exhaust flow by reducing back pressure. This results in increased power output and delivers a sporty sound that remains civilized during everyday driving but turns pleasantly aggressive under hard acceleration. The system incorporates a Helmholtz chamber design to effectively reduce resonance, or "drone," at lower RPMs, ensuring a more enjoyable driving experience. Key Features: Power Gains: +6 HP @ 6600 RPM, +5 LB-FT @ 6600 RPM Helmholtz Chamber: Minimizes drone for a comfortable cabin environment Sporty Sound: Enjoyably louder and sportier under acceleration Stylish Exhaust Tips: Twin 89mm (3.5") laser-engraved exhaust tips available in polished stainless or ceramic black for a high-performance aesthetic Durable Construction: Made from 100% 16-gauge 304 stainless steel, resistant to corrosion for longevity Factory-Like Fitment: Utilizes factory brackets and hangers for easy installation This exhaust system seamlessly blends performance and style , making it a perfect upgrade for any BMW M235i owner looking to enhance their vehicle's sound and power while maintaining its refined character. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.3 Length 50 Max HP Gain 6 Max Torque (lb-ft) Gain 5 Product Type Axle-Back Exhaust Sale Category Exhaust Weight 47 Width 34 UPC 813725021812 Part Number D660-0048-BLK   Fitment Chart: Make Model Year BMW M235I (F22) 2014-2016

Special Note:   Only for xDrive (AWD) F01 Alpina B7's.   Installation labor time is 11.4 hrs if supplemental ride quality & handling kit is installed by itself.   Installation labor time will be negligible if installed at the same time as the corresponding Dinan Spring Set. Product Description Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.   NOTICE:   Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. Models Supported by Dinan Supplemental Ride Quality & Handling Kit for BMW    2019-2024 BMW 330i 2020-2024 BMW M340i 2021-2024 BMW M440i xDrive 2018-2024 BMW X4 2020-2024 BMW X6 2019-2024 BMW 330i xDrive 2020-2024 BMW M340i xDrive 2018-2024 BMW X3 2020-2024 BMW X5 Product Specifications Included Notes 2 front bump stops, 2 rear bump stops Required Items Highly Recommended:   D100-0905 - Performance Spring Set for BMW F01 Alpina B7 (see product description for details).

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Adjustable Coil-Over Suspension System for BMW M5 2018-2023 Instructions for Part# D190-0901 The Dinan Adjustable Coil-Over Suspension system is crafted for drivers who expect the highest level of performance and versatility from their vehicle. Designed in the race lab but refined for street driving, this suspension setup offers an exceptional blend of superior handling, enhanced performance, and remarkable comfort —all while providing a sleek, lowered stance. This system preserves the factory electronic shocks, replacing the springs with Dinan's advanced formula and integrating threaded collars for easy, customizable ride height adjustments. Dinan’s design upgrades include a stiffer, linear-rate rear spring that improves handling predictability without compromising the ride quality. For a balanced appearance and optimal performance, Dinan recommends a 1" drop in the front and 1-1/8" drop in the rear , though adjustments up to 2" front and 2-1/8" rear are possible for those seeking an even lower profile. Features: Threaded collars enable precise front and rear height adjustments. Adjustable lowering : Up to 2" front and 2-1/8" rear, with a recommended drop of 1" front and 1-1/8" rear for best ride quality. Increased spring stiffness : 20% stiffer in the front and 15% in the rear; utilizes a linear rate for consistent performance. Helper springs maintain proper suspension operation during wheel travel. Substantial reduction in body roll , improving handling at high speeds. Dinan-spec progressive bump stops for a smooth, controlled ride, even with lowered heights. Suspension packers included to fine-tune handling and comfort by adjusting bump-stop clearance. 6061-T6 aluminum components with black anodized finish for durability, style, and corrosion resistance. Stock upper spring mounts retained for quieter operation. Note : Due to the possible extensive lowering, tire clearance should be carefully evaluated during installation to ensure safety. Dinan is not liable for damage or injury if precautions are not observed. Brand Dinan Dinan Point Value 3 Emission Code 6 Height 11 Labor Time (Hours) 9.2 Length 23 Product Type HAS Kit Weight 41 Width 12 UPC 813725025124 Part Number D190-0901   Fitment Chart: Make Model Year BMW M5 2018-2023

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M3 Sedan ( E90 ) 2008-2011 Special Note:   This fits the M3 Sedan only. Dinan, the top research company in the BMW aftermarket, has a proven legacy of performance, having powered back-to-back Rolex Series Daytona Prototype racing championships from 2010 to 2012 and winning the prestigious 24 Hours of Daytona in 2013 with Chip Ganassi Racing. This excellence is the foundation of Dinan’s Free Flow Axle-Back Exhaust systems, where cutting-edge technology is brought directly to BMW owners who value both performance and refinement. Dinan’s Free Flow Axle-Back Exhaust is designed to optimize flow and sound without compromising on either. The Helmholtz chamber , a key feature, reduces the drone that commonly affects aftermarket exhausts at low throttle, making for a quieter, more refined driving experience. The exhaust also features a straight-through single pipe design that further reduces noise during light throttle while delivering a sportier and more aggressive exhaust note at wide-open throttle. In addition to improving performance, Dinan's exhaust is built for durability and weight savings. Constructed from 100% 20-gauge 304 stainless steel , this system is lighter than stock by 10 pounds , which contributes to better overall vehicle dynamics. The system features quad 3" black ceramic-coated tips that are laser-engraved for a sleek look, perfectly complementing the BMW’s aesthetic. Dinan’s approach to performance without sacrificing everyday drivability is a testament to its focus on maintaining BMW’s hallmark refinement. Key Features: Increased Power: +6 HP and +5 lb-ft @ 6800 RPM Helmholtz Chamber: Reduces drone at light throttle, ensuring a quiet cabin experience Straight-Through Design: Enhances flow and performance while minimizing noise at low throttle Sporty Sound: Enjoyably louder and more aggressive at wide-open throttle Quad 3" Exhaust Tips: Black ceramic-coated and laser engraved for a premium appearance Weight Savings: 10 lbs lighter than the stock exhaust system Durable Build: Made from 100% 20-gauge 304 stainless steel to resist corrosion Seamless Fitment: Uses factory brackets and hangers for easy installation Warranty: Includes a 4-year/50,000-mile new car factory matching warranty—double the warranty offered by most competitors Brand Dinan Dinan Point Value 3 Emission Code 5 Height 15 Labor Time (Hours) 1.6 Length 63 Max HP Gain 6 @ 6800 RPM Max Torque (lb-ft) Gain 5 @ 6800 RPM Product Type Axle-Back Exhaust Weight 72 Width 18 UPC 813725021614 Part Number D660-0028   Fitment Chart: Make Model Year BMW  M3 (E90)  2008-2011

Description:   The N55 xDrive turbo hardware kit consists of the required additional components when upgrading to the Dinan big turbocharger on an xDrive vehicle. These components are replaced when installing a turbocharger per BMW recommended procedure.   Special Note:  See turbo installation time. MODELS SUPPORTED Year Make Model Submodel 2014-2016 BMW 335i GT xDrive 2014-2016 BMW 435i xDrive 2012-2017 BMW 535i GT xDrive 2014-2018 BMW 640i xDrive 2013-2015 BMW 740li xDrive 2012-2017 BMW X3 2014-2018 BMW X5 2013-2015 BMW 335i xDrive 2015-2016 BMW 435i xDrive Gran Coupe 2012-2016 BMW 535i xDrive 2014-2019 BMW 640i xDrive Gran Coupe 2015-2016 BMW M235i xDrive 2015-2018 BMW X4 2015-2019 BMW X6 Product Specifications: Included Notes Exhaust manifold gaskets & nuts, turbocharger / catalyst gasket.

For any questions please PM or email: Online@AutoTalent.com Dinan Strut Tower Brace for BMW 5-Series 1997-2003  Instructions for Part# D180-0390 Dinan Strut and Shock Tower Braces are designed to maintain the structural integrity of your vehicle's strut and shock towers over time. By reducing flex during hard cornering , these braces improve handling and ensure more precise steering . Their brushed aluminum construction with carbon fiber inlays adds an aesthetic upgrade under the hood, while the machined end brackets ensure a precise and solid installation. Compatible with both Dinan Suspension Systems and stock components , these braces offer an effective way to enhance performance and durability. Key Features: Improved chassis rigidity for better handling. Bolt-on installation on top of the strut towers for ease of setup. Reduced flex in the strut and shock towers during cornering. Brushed aluminum and carbon fiber inlays for enhanced aesthetics. Compatible with Dinan Suspension Systems or OEM components . Brand Dinan Dinan Point Value 2 Emission Code 5 Height 4 Labor Time (Hours) 0.5 Length 44 Product Type Strut Tower Brace Weight 7.8 Width 10 UPC 813725020594 Part Number D180-0390   Fitment Chart: Make Model Year BMW 525i 2001-2003 BMW 528i 1997-2000 BMW 530i 2001-2003 BMW 540i 1997-2003 BMW M5 2000-2003

Special Note:   Not compatible with RWD vehicles. xDrive equipped vehicles ONLY.   Installation labor time is 5.4 hrs if supplemental ride quality & handling kit is installed by itself.   Installation labor time will be negligible if installed at the same time as the corresponding Dinan Spring Set. Product Description Dinan® supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.  Compatible with stock or other rear shocks with 10mm threads (such as Dinan D140-0945). Not compatible with Dinan D140-0946 rear shocks with 12mm threads and external adjustment. NOTICE:  Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. Models Supported by  Dinan Supplemental Ride Quality & Handling Kit for BMW E90/E92 335 xDrive 2007-2010 335i & xDrive E90 Sedan  2011 335i & xDrive E90 Sedan 2007-2010 335i & xDrive E92 Coupe  2011-2013 335i & xDrive E92 Coupe  Product Specifications Included Notes 2 front bump stops, 2 rear bump stops, rear upper shock mount kit (12mm), cover Required Items Highly Recommended:   D100-0926 - Performance Spring Set for BMW E90 335i (see product description for details).   OR   D100-0497 - Performance Spring Set for BMW E92 335i (see product description for details).   (2) D140-0496 - Koni Rear Shocks

For any questions please PM or email:  Online@AutoTalent.com Dinan Big Turbo Kit - No Core for BMW 5-Series | 6-Series | 7-Series (F Chassis, N55) 2012-2019 The Dinan Big Turbo Upgrade for the Electric Wastegate (EWG) N55 engine is an exceptional performance enhancement designed for racing enthusiasts or anyone seeking to maximize the power potential of their BMW. This upgrade offers a significant increase in airflow, enabling the turbo to generate higher boost pressures at elevated engine speeds while maintaining efficiency. The result is a dramatic boost in power and torque, allowing the N55 engine to achieve performance levels typically reserved for higher-tier models. Key Features & Benefits: Larger Compressor Wheel: The turbo's billet compressor/impeller wheel is 30% larger than the stock unit, allowing for significantly greater airflow. This enables the engine to produce higher boost pressures at higher RPMs, resulting in more power while retaining efficiency. Fully Cast Construction: The turbocharger is cast to Dinan's specifications and incorporates an upgraded thrust system , providing greater durability and reliability over stock turbos. This eliminates the need for core exchange programs and lengthy wait times, making the upgrade more convenient. Enhanced Durability: The upgraded thrust system ensures that the turbo can withstand the increased demands of higher boost levels, offering prolonged life and consistent performance. Power Gains: With the Stage 2 Flash and Dinan software, combined with an upgraded intercooler , the turbo delivers significant power and torque gains, with 93 octane fuel being the recommended setup. M2 (with Stage 2 Flash): Peak power: 417 BHP @ 6500 RPM Peak torque: 440 lb-ft @ 3500 RPM Max gains: +48 BHP @ 4000 RPM, +64 lb-ft @ 3000 RPM Non-M2 (with Stage 2 Flash): Peak power: 384 BHP @ 5500 RPM Peak torque: 439 lb-ft @ 3500 RPM Max gains: +122 BHP @ 4500 RPM, +162 lb-ft @ 3000 RPM Race gas options are also available for further power gains. Optimized Installation Procedure: The Dinan installation process is quicker than BMW's turbo replacement procedure, saving time and labor costs. This is particularly beneficial for RWD vehicles , where installation is simplified. Comprehensive Kit: The package includes all necessary o-rings and gaskets for installation on RWD vehicles. For xDrive vehicles , additional hardware is required (Dinan P/N D313-0117). Factory-Matching Warranty: Dinan offers a 4-year/50,000-mile new car warranty when the system is installed according to Dinan specifications, providing peace of mind for performance enthusiasts. Emissions Legal: The upgrade is 50-state emissions legal , certified under CARB EO # D-176-52 , ensuring compliance with emissions regulations across the U.S. Performance & Compatibility: This turbo upgrade is only compatible with electric wastegate vehicles. To fully realize the performance gains, Dinan recommends pairing the turbo with their Stage 2 Flash , an upgraded intercooler (Dinan Dual Core Intercooler where applicable), and high-octane fuel. Brand Dinan Dinan Point Value 2 Emission Code 1 Height 9 Labor Time (Hours) 11.5 Length 14 Product Type Turbocharger Weight 13 Width 14 UPC 813725024134 Part Number D310-0110A    Fitment Chart: Make Model Year BMW 535i 2012-2016 BMW 535i GT 2012-2017 BMW 535i GT xDrive 2012-2017 BMW 535i xDrive 2012-2016 BMW 640i 2012-2018 BMW 640i Gran Coupe 2013-2019 BMW 640i xDrive 2014-2018 BMW 640i xDrive Gran Coupe 2014-2019 BMW 740i 2013-2015 BMW 740Li 2013-2015 BMW 740Li xDrive 2013-2015

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW X5M / X6M 2010-2014 In true Dinan fashion, the Free Flow Axle-Back Exhaust for the first BMW to carry both the "X" and "M" badges delivers an impressive combination of performance and sound, specifically designed for BMW's high-performance SUVs. Built from 100% 304 stainless steel , this exhaust system not only enhances the power and torque of your M-badged BMW SUV but also gives it a sportier exhaust note while maintaining daily drivability. Key Features: More Power: +8 HP @ 6000 RPM, +7 lb-ft @ 6000 RPM for improved performance Drone Abatement Technology: Reduces cabin resonance for a quieter, more refined driving experience Sportier Sound: Provides an enjoyably louder and aggressive exhaust tone, especially under harder acceleration Quad 3.5" Exhaust Tips: Available in polished or ceramic black finishes, laser engraved for a premium, high-performance look Durable Construction: Made from 100% 304 stainless steel for long-lasting resistance to corrosion Easy Installation: Uses factory brackets and hangers for seamless, OEM-like fitment This exhaust system is a great choice for those looking to improve the power, sound, and overall driving experience of their M-badged BMW SUV, while staying true to Dinan’s high standards of quality and performance. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 11 Labor Time (Hours) 1.5 Length 48 Max HP Gain 8 @ 6000 RPM Max Torque (lb-ft) Gain 7 @ 6000 RPM Product Type Axle-Back Exhaust Weight 62.1 Width 30 UPC 813725021638 Part Number D660-0035-BLK   Fitment Chart: Make Model Year BMW X5 M 2010-2014 BMW X6 M 2010-2014

For any questions please PM or email: Online@AutoTalent.com Dinan High Flow Throttle Body for BMW 545i / 645ci / 745i / X5 2002-2006 Instructions for Part# D760-3600A   Note: Not compatible with the X5 4.4i (E53) from 2000-2003, Stage 3 Engine Software recommended for optimum performance and drivability. The Dinan High Flow Throttle Body for Valvetronic engines is engineered to improve performance by reducing intake air-flow restriction, allowing the engine to breathe more freely. Despite the presence of a throttle body in Valvetronic engines, it operates differently, primarily assisting with traction control and functioning as a "safety valve." Dinan’s larger-bore throttle body enhances airflow most effectively in wide-open throttle conditions, boosting horsepower and torque when paired with Dinan engine software. Features: Increased Power Output : E60 545i & E63/E64 645Ci : +5 HP @ 6500 RPM, +4 LB-FT @ 5500 RPM (with engine software) E65/E66 745i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) 2004-06 E53 X5 4.4i : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) E53 X5 4.8is : +8 HP @ 6500 RPM, +8 LB-FT @ 5500 RPM (with engine software) Improved Throttle Response : Enhances engine responsiveness for a more dynamic driving experience. Larger Bore : Expanded by 3mm for an 8% increase in air flow area, optimizing intake efficiency and power potential. Brand Dinan Clearance Category Air and Fuel Delivery Dinan Point Value 2 Emission Code 1 Labor Time (Hours) 0.8 Max HP Gain 5 - 8 (Depending on application) Max Torque (lb-ft) Gain 4 - 8 (Depending on application) Product Type Throttle Body Sale Category Throttle Bodies Weight 6 UPC 813725028415 Part Number D760-3600A   Fitment Chart: Make Model Year BMW 545i 2004-2006 BMW 645ci 2004-2005 BMW 745i 2002-2005 BMW 745Li 2002-2005 BMW X5 2004-2006

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Heat Exchanger for BMW M2 / M3 / M4 2015-2021 Instructions for Part# D780-0001A The Dinan High-Performance Heat Exchanger for the F8x (S55) platform is designed to combat heat soak and enhance engine efficiency by significantly reducing intake air temperatures (IAT). Heat soak in the stock system often forces the ECU to reduce power output after just a few high-performance pulls. Dinan’s upgraded heat exchanger addresses this issue with a larger, more effective unit that maintains optimal IATs even during prolonged, intense driving sessions. Key Benefits: Increased Power : Gains of +10 HP and +20 lb-ft of torque on the stock tune, thanks to cooler intake air. Enhanced Cooling Capacity : With 60% more volume, 19% more face area, and a 40mm thickness (compared to the stock 24mm), the heat exchanger dramatically reduces water temperatures to the intercooler. Efficient Heat Management : Reduces water temperatures by an average of 9°C, leading to a 6°C drop in intake air temps across the RPM range. Optimized Airflow Balance : While thicker than stock, the 40mm size was chosen to avoid obstructing airflow to the main radiator, preserving engine cooling efficiency. Durable and Track-Tested : Rubber-mounted for vibration isolation and rigorously tested to ensure consistent performance under extreme conditions. This heat exchanger upgrade is an ideal solution for F8x owners seeking increased power, reduced heat soak, and better overall reliability in demanding driving conditions.   Brand Dinan Dinan Point Value 2 Emission Code 7 Height 9 Labor Time (Hours) 3.5 Length 29 Max HP Gain 10 Max Torque (lb-ft) Gain 20 Product Type Heat Exchanger Weight 14 Width 17 UPC 813725023380 Part Number D780-0001A   Emissions: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status. Fitment Chart: Make Model Year BMW M2 Competition 2019-2021 BMW M3 2015-2018 BMW M4 2015-2020 BMW M4 CS 2019-2020 BMW M4 GTS 2016

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW M550i xDrive ( G30 ) 2018-2023 The Dinan Free Flow Axle-Back Exhaust for the BMW G30 M550i marks a new chapter in Dinan's exhaust system design. This system is engineered to improve exhaust flow , reduce back pressure , and enhance power output , delivering gains of +8 HP and +6 lb-ft of torque at 6600 RPM . While retaining the brand's hallmark balance between a civilized tone and aggressive sound under acceleration, the M550i exhaust introduces a bold new design for the exhaust tips, which are now massive 4" diameter double-walled tips. These clamp-on tips are a first for Dinan, offering easy replacement or customization options without welding. Like other Dinan exhausts, the M550i system features drone abatement technologies to minimize cabin noise at low RPM, ensuring a quiet and comfortable interior even during high-performance driving. The computer-controlled exhaust valves retained from the stock system modulate the sound, limiting noise during low-speed driving but opening fully under load to allow free exhaust flow and deliver a deep, throaty V8 tone. The result is a refined yet sporty note that accentuates the M550i’s performance. Constructed from 100% 304 stainless steel , this exhaust system offers durability and resistance to corrosion, ensuring long-lasting performance. The system also provides a straightforward installation with a bolt-on design , utilizing the factory hangers and including all necessary mounting hardware. Key Features: Power Gains: +8 HP and +6 lb-ft of torque at 6600 RPM Sound: Louder, sportier sound with controlled exhaust valves to manage noise at low speeds Drone Reduction: Incorporates technologies to reduce low-RPM drone, keeping the cabin quiet Exhaust Tips: Four 4" diameter double-walled, clamp-on tips available in polished or ceramic black finishes, laser engraved with the Dinan logo Material: 100% 304 stainless steel for durability and corrosion resistance Installation: Easy bolt-on installation with included hardware, using factory hangers for a seamless fit Brand Dinan Dinan Point Value 3 Emission Code 5 Height 16 Labor Time (Hours) 1.9 Length 66 Max HP Gain 8 @ 6600 RPM Max Torque (lb-ft) Gain 6 @ 6600 RPM Product Type Axle-Back Exhaust Sale Category Exhaust Tip Finish Black Ceramic Coated Weight 73 Width 30 UPC 813725024660 Part Number D660-0075-BLK Fitment Chart: Make Model Year BMW M550i xDrive 2018-2023

Dinan Supplemental Ride Quality Handling Kit - BMW M550i G30 2018-2021 DESCRIPTION: To fully enjoy Dinan performance spring sets we highly recommend pairing them up with our supplemental ride quality and handling kits. This additional kit includes tuned, progressive rate bump stops that maximize suspension travel on the lowered car for improved handling capabilities and ride quality when compared to just a spring set. By allowing for full compression travel within the spring the possibility of a sudden "bottoming out" is negated, a common unwanted side effect when lowering a vehicle. Bump stops also have the added benefit of optimizing the spring rate rewarding those that use them with added mechanical grip and cornering power. Simply put, the Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets. NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car's improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted. SPECS: Included Notes 2 front bump stops Required Items Highly Recommended: D100-0932 - Performance Spring Set for BMW G30 M550i (see product description for details. VEHICLE FITMENT: 2018-2023 M550i G30 NOTE: Images are for representation purpose only and may differ depending on application.

For any questions please PM or email: Online@AutoTalent.com DINANTRONICS Sport Performance Tuner for BMW M2 / X1 / X3 / X4 / X5 / X6 / Z4 2011-2019 FOR BMW N20/N26/N55 Engines Instructions for Part# D440-0010 The DINANTRONICS Sport is a powerful and user-friendly boost controller designed to enhance the performance of BMW models equipped with the N20 and N55 engines. Its easy installation, Bluetooth compatibility, and adjustable power settings make it ideal for enthusiasts who want to boost their driving experience without complicated modifications. Maximum Gains: N20 Engine: Up to +30 HP and +50 lb-ft of torque. N55 Engine: Up to +30 HP and +40 lb-ft of torque. Key Features: Bluetooth Smart Compatibility: Works with both Android and iOS (except Android OS 8.0 "Oreo" & OS 14.0). Live Boost Monitoring: Real-time boost data streaming via a smartphone app, mimicking sport gauges found in iDrive. Multiple Power Settings: Includes Sport, Sport+, and Race modes for customizable performance. Valet / Parental Control: Limits boost by -3 PSI for safer driving when needed. Quick and Easy Installation: Plug-in design connects to a single sensor for discreet installation or removal. Automatic Engine Detection: The unit automatically recognizes the engine and adjusts its mapping accordingly. Warranty and Notes: 1-Year Product Warranty: Covers the product itself but excludes consequential damages or labor reimbursement. CARB EO Approval Pending: The unit is CARB EO submitted, with approval pending. 14-Day Satisfaction Guarantee: Risk-free trial for two weeks. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 3 Labor Time (Hours) 0.25 Length 9 Max HP Gain Up to +30 Max Torque (lb-ft) Gain Up to +50 Product Type Inline Module Sale Category Tuners and Programmers Weight 1.5 Width 6 UPC 813725022789 Part Number D440-0010     Fitment Chart: Make Model Year BMW M2 2016-2018 BMW M235i 2014-2016 BMW M235i xDrive 2015-2016 BMW X1 2012-2015 BMW X3 2011-2017 BMW X4 2015-2018 BMW X5 2014-2018 BMW X6 2015-2019 BMW Z4 2012-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Polished Tips for BMW M3 / M4 ( F8x ) 2015-2020 The F8x M3/M4 offers an exhilarating sound straight from the factory, but with a Dinan Free Flow Axle-Back Exhaust system, it transforms into a symphony of power and refinement that will impress even the most discerning ear. This system is made from 100% 304 stainless steel and is precisely engineered to ensure a perfect fit using the factory hangers and mounting points. Dyno-tuned to provide maximum exhaust flow with minimal backpressure, it offers a more aggressive sound during acceleration, while advanced drone abatement technologies reduce cabin resonance at low speeds. The system features computer-controlled valves that stay quiet during everyday driving but fully open under high-load conditions for free flow and optimal sound. Key Features: Power Gains: +5 HP Drone Abatement Technologies: Reduces cabin resonance for a refined sound Sound Profile: Enjoyably louder and sportier, with an aggressive tone under hard acceleration Exhaust Tips: Quad 3.5" laser engraved tips available in polished stainless steel or black ceramic-coated finish Computer-Controlled Valves: Adjust the sound via the M-Drive settings, reusing stock exhaust valve actuators for seamless operation Secondary Exhaust Valves: Twin 76mm valves are 45% less restrictive than the OE, enhancing flow and performance Weight Reduction: Dinan exhaust is 3 lbs lighter than the stock system Construction: 100% 304 stainless steel for long-lasting durability and corrosion resistance Fitment: Uses factory brackets and hangers for a factory-like installation Dinan's Free Flow Axle-Back Exhaust is backed by their industry-exclusive factory-matching new car bumper-to-bumper warranty and designed and tested in Morgan Hill, California . Available for purchase and installation at any Dinan Approved BMW dealership nationwide , this system perfectly embodies Dinan’s philosophy of "Performance Without Sacrifice."   Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.8 Length 50 Max HP Gain 5 Product Type Axle-Back Exhaust Tip Finish Polished Weight 56 Width 34 UPC 813725020679 Part Number D660-0050   Fitment Chart: Make Model Year BMW M3 2015-2018 BMW M4 2015-2020

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Anti-Roll Bar Set for BMW M6 / M6 Gran Coupe 2012-2019 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars are designed to enhance the handling dynamics of your BMW by significantly reducing body roll while maintaining an optimal level of comfort. These anti-roll bars are specifically tuned for each BMW chassis, ensuring that your vehicle remains level during cornering and provides a more planted and confident driving experience. Front Anti-Roll Bar Diameter: 28mm (compared to stock size of 24.5mm) Weight Savings: 44% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 35% to 53% stiffer than the stock bar 2-hole design allows for mounting in 3 different positions Installation: Comes with adjustable left and right-hand threaded end links for easy length adjustment Rear Anti-Roll Bar Diameter: 22mm (compared to stock size of 21.5mm) Weight Savings: 29% lighter than a solid anti-roll bar of comparable stiffness Adjustability: Adjustable from 39% to 72% stiffer than the stock bar 3-hole design allows for mounting in 3 different positions using stock BMW end links Features: Construction: Tubular (hollow) design for lightweight performance without sacrificing strength Market Unique: The only tubular anti-roll bars with a large range of adjustment available Performance Benefits: Less Body Roll: Enhances cornering stability and control More Mechanical Grip: Improves traction, especially during aggressive driving Increased Stability: Provides confidence at the limit, enhancing overall driving experience Upgrade to Dinan's Lightweight Tubular Adjustable Anti-Roll Bars to experience a more responsive and dynamic ride, tailored specifically for your BMW chassis. This performance enhancement allows you to enjoy the thrill of driving while benefiting from improved handling characteristics. Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 3.2 Length 44 Product Type Sway Bar Weight 30 Width 10 UPC 813725020433 Part Number D120-0560   Fitment Chart: MAKE MODEL YEAR BMW M6 2012-2018 BMW M6 Gran Coupe 2014-2019

For any questions please PM or email: Online@AutoTalent.com Dinan Stage 1 Suspension System for BMW M3 1996-1999 Note: Not compatible with the convertible. Dinan Stage 1 Suspension System is the essential upgrade for enhanced handling and performance. This comprehensive suspension kit combines performance-tuned springs with Koni adjustable front struts and rear shocks to achieve a perfect balance between sportiness and comfort. Features: Complete Base Kit : Includes performance springs, Koni adjustable front strut assemblies, and rear shocks. Enhanced Handling and Grip : Significantly improves handling and grip for more confident cornering. Reduced Body Roll : Minimizes body roll for a more stable and controlled driving experience. Tasteful Lowered Stance : A modest reduction in ride height provides a sportier look and optimized suspension geometry. Adjustable Rebound Dampening : The Koni front struts allow external rebound adjustment via an easily accessible knob at the top, while the rear shocks are adjustable with removal. Brand Dinan Dinan Point Value 3 Emission Code 5 Labor Time (Hours) 7.5 Product Type Coil Over Kit Weight 65 UPC 813725028897 Part Number D190-3211K   Fitment Chart: Make Model Year BMW M3 1996-1999

Product Description The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input. Dinan's Performance Spring set for the F85 X5M and F86 X6M provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 5/8" in front and 3/4" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 10% increase in stiffness to the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. NOTICE:  Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.  Benefits of the Dinan Performance Spring Set for the F85 X5 M & F86 X6 M: +   Decreased body roll from higher spring rates (10% increase in front) +   Lowers the vehicle 5/8" in front and 3/4" in the rear +  Shot-peened for stress relief +   Preset to prevent spring sag +   Compatible with factory electronic shocks and load-leveling systems Models Supported by Dinan Performance Spring Set for the F85 X5 M & F86 X6 M 2015-2018 X5 M F85  2015-2019 X6 M F86  Corresponding Ride Quality and Handling Kit highly recommended. Refer to description for details. Product Specifications Labor Hours/Installation Hours 9.20 Included Notes 2 front springs, rear ride height sensor rods Required Items Highly Recommended:   D193-8501 - Supplemental Ride Quality & Handling Kit for BMW F85 X5 M F86 X6 M (see product description for details).

For any questions please PM or email: Online@AutoTalent.com Dinan Cold Air Intake for BMW M2 / M3 / M4 2015-2021  Instructions for Part# D760-0045 Note:   This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. The Dinan Carbon Fiber Cold Air Intake for the F8x M2C/M3/M4 combines striking aesthetics with performance-oriented engineering. Crafted to complement the high standards of the S55 engine, this intake optimizes the stock design by minimizing air resistance and maximizing cold airflow through a streamlined, carbon fiber tube. Enhanced air intake efficiency is achieved via dual, high-capacity airboxes, each fitted with 30% larger cylindrical filters. This design enhances throttle response, power, and sound, offering a slight but noticeable sportier tone over the stock system. When paired with Stage 2 DINANTRONICS tuning, it delivers even greater power gains. Key Features: Power Gains : +14 HP at 6000 RPM and +21 lb-ft at 3000 RPM (with tuning). Enhanced Sound : Slightly more audible, with a refined sporty tone. Sealed Cold-Air System : 20% larger volume airboxes maximize insulation and prevent heat soak. Optimized Carbon Fiber Tube : Redesigned for a straighter, freer flow with larger MAF housing. High-Flow Filter : 30% larger for increased air intake. Simple Installation : Bolt-on setup makes for a quick enhancement. Brand Dinan Dinan Point Value 3 Emission Code 7 Height 10 Labor Time (Hours) 2 Length 24 Max HP Gain 14 @ 6000 RPM Max Torque (lb-ft) Gain 21 @ 3000 RPM Product Type Cold Air Intake Sale Category Cold Air Intakes Weight 10 Width 18 UPC 813725022727 Part Number D760-0045   Fitment Chart: Make Model Year BMW M2 2019-2021 BMW M3 2015-2018 BMW M4 2015-2020

Description: The rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle. Our replacement turbochargers been built to the stock BMW’s rigorous standards and testing to ensure compatibility. The replacement N54 turbos comes with a 2 year guarantee, unlimited mile warranty to secure your driving pleasure in the foreseeable future. High performing rear replacement turbo with the engineering expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement.    Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 MODELS SUPPORTED   2009-2016 BMW 1M 2011 BMW 135i 2009-2016 BMW Z4 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Product Specifications: Labor Hours/Installation Hours 15.50 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 228i / 230i / 428i / 430i 2014-2021   Instructions for Part# D100-0928 Note: Not compatible with xDrive models, the 228i/230i convertible or the 428i/430i convertible and gran coupe. The Dinan Performance Spring Set for the F22 228i/230i (RWD) and F32 428i/430i (RWD) delivers a refined blend of aesthetics, improved handling, and ride quality. By carefully calibrating spring rates and lowering the vehicle, this upgrade enhances suspension geometry, reduces body roll, and increases driver confidence at any speed. Key Features: Lowered Ride Height : F22 228i/230i (RWD) : Lowered by 1/2 inch in both the front and rear. F32 428i/430i (RWD) : Lowered by 5/8 inch in the front and 3/4 inch in the rear. The reduced ride height results in an aggressive stance and better suspension geometry. Increased Spring Stiffness : F22 228i/230i : 50% stiffer springs . F32 428i/430i : 41% increase in the front and 29% increase in the rear . This reduces compression under acceleration and braking, providing better stability and control. Enhanced Handling : Reduced body roll improves cornering dynamics, steering responsiveness, and overall road feel. Noticeable improvements in grip for high-speed situations, inspiring confidence in the car’s capabilities. Durable Construction : CNC-wound using high tensile chrome silicon wire . Shot-peened for stress relief , ensuring long-lasting performance with no sag. Versatile Compatibility : Works with both conventional and factory electronic shocks , offering flexibility across setups. Important Note: For the best results, Dinan recommends pairing the spring set with the corresponding Ride Quality and Handling Kit . This combination ensures the advertised performance, ride height, and ride quality. While not mandatory, skipping this kit may result in diminished performance or comfort, which will not be covered under warranty. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 7.8 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725023625 Part Number D100-0928   Fitment Chart: Make Model Year BMW 228i 2014-2016 BMW 230i 2017-2021 BMW 428i 2014-2016 BMW 430i 2017-2021

Special Note:   Installation labor time 7.8 hrs (RWD with alignment) if supplemental ride quality & handling kit is installed by itself.   Installation labor time will be negligible if installed at the same time as the corresponding Dinan Spring Set. Product Description  Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.  NOTICE:  Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits.  Models Supported by Dinan Supplemental Ride Quality & Handling Kit for BMW (RWD & xDrive)   2016-2018 BMW 340i 2014-2016 BMW 428i 2014-2016 BMW 435i 2014-2016 BMW 435i xDrive 2017-2020 BMW 440i Gran Coupe 2016-2018 BMW 340i xDrive 2017-2020 BMW 430i 2015-2016 BMW 435i Gran Coupe 2017-2020 BMW 440i 2017-2020 BMW 440i xDrive Product Specifications Included Notes 2 front bump stops, 2 rear bump stops Required Items Highly Recommended:   D100-0931 - Performance Spring Set for BMW F30 340i (RWD) (see product description for details).

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Front Anti-Roll Bar for BMW 128i / 135i / 328i / 330i / 335i 2006-2013 Dinan's Lightweight Tubular Adjustable Front Anti-Roll Bar is engineered to enhance your BMW's performance by significantly improving grip and stability while reducing weight. Unlike factory-installed anti-roll bars, which are often designed for comfort, Dinan's bars are tuned specifically for each BMW chassis to minimize body roll and increase mechanical grip, resulting in a more planted and confident driving experience. Key Features: Size: Large 28mm diameter (compared to stock size of 26.5mm) Weight: 38% lighter than solid anti-roll bars of comparable stiffness, contributing to reduced unsprung weight Adjustability: Can be adjusted from 42% to 57% stiffer than the stock bar, allowing customization for varying driving conditions and preferences Design: 2-hole configuration with 3 possible mounting positions for further tuning options Supplied end links are left and right-hand threaded for easy length adjustments Tubular (hollow) construction provides superior stiffness while maintaining lightweight benefits Phase Build Compatibility: This anti-roll bar can be integrated into the Stage 1 Suspension System, allowing for incremental upgrades to your high-performance suspension setup Benefits: Reduced Body Roll: Keeps your BMW more level during cornering, enhancing control and stability Improved Mechanical Grip: Enhances traction and handling, especially in tight turns Enhanced Stability: Offers greater confidence at the limit, making every drive more enjoyable Upgrade your suspension system with Dinan's Lightweight Tubular Adjustable Front Anti-Roll Bar for a performance boost that maintains the balance between comfort and responsiveness. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 6 Labor Time (Hours) 1.1 Length 42 Product Type Sway Bar Sale Category Suspension and Chassis Weight 17 Width 16 UPC 813725020426 Part Number D120-0530 Fitment Chart: MAKE MODEL YEAR BMW 128i 2008-2013 BMW 135i 2008-2013 BMW 135is 2011-2013 BMW 328i 1997-2000 BMW 330i 2006 BMW 335i 2007-2013 BMW 335is 2011-2013

For any questions please PM or email: Online@AutoTalent.com Dinan Resonator Delete Kit for BMW M2 2016-2018 Instructions for Part# D660- 0059 Note:   Only confirmed to fit with the Dinan Free Flow Axle Back and stock exhaust systems. Fitment with other axle back units is not guaranteed. The Dinan Resonator Delete Kit for the F87 M2 is engineered to deliver an enhanced, aggressive exhaust tone by removing the stock resonator. When paired with a Dinan exhaust, this upgrade transforms the M2’s sound profile, adding a deeper and more intense growl. By eliminating the resonated section, it optimizes airflow with straight-through 3.25" T304 stainless steel piping. Key Features: Sound Enhancement : Deletes the factory resonator positioned between the catalytic converter and rear muffler, producing a more aggressive exhaust tone. Improved Flow : Upgrades the stock 80mm (3.15") hydro-formed piping to 3.25" (82.6mm) mandrel-bent stainless steel, enhancing exhaust flow and reducing backpressure. Durable Construction : Constructed from 100% T304 stainless steel, known for its longevity and resistance to corrosion. Easy Bolt-On Installation : The kit is designed for straightforward installation with provided mounting hardware, offering a perfect fit and reliable setup.   Brand Dinan Dinan Point Value 1 Emission Code 5 Height 6 Labor Time (Hours) 1.2 Length 51 Product Type Resonator Delete Weight 10 Width 10 UPC 813725023274 Part Number D660-0059   Fitment Chart: Make Model Year BMW M2 2016-2018

For any questions please PM or email: Online@AutoTalent.com Dinan Camber Plates for BMW 323i / 325i / 328i / Z4 1998-2006  Dinan Camber Plates deliver enhanced cornering performance for most vehicles by adding -0.6 degrees of negative camber to the front wheels, leading to improved traction, sharper turn-in response, and a dramatic reduction in understeer. However, for the Z8 , they function as caster plates, relocating the upper strut mounting position to provide +0.5 degrees of caster. This unique setup still induces negative camber in turns, further enhancing grip and responsiveness. Features: Additional -0.6 degrees of camber (except Z8). Additional +0.5 degrees of caster (Z8 only). Decreased understeer , improving handling and cornering agility. Brand Dinan Dinan Point Value 1 Emission Code 5 Height 3 Labor Time (Hours) 3.5 Length 6 Product Type Camber Plates Weight 6 Width 6 UPC 813725020488 Part Number D160-0390   Fitment Chart: Make Model Year BMW 323i 1999-2000 BMW 323Ci 2000 BMW 325i 2001-2005 BMW 325Ci 2001-2006 BMW 328i 1999-2000 BMW 328Ci 2000 BMW Z4 2003-2006

Description:   High performing rear replacement turbo with the engineering and reliability expected from all Dinan parts. Revitalize your exhausted turbo with this high grade replacement. Our rear replacement turbo is a rebuilt turbocharger that has been modified with a heavy duty wastegate pivot unlike the wear-prone stock wastegate pivot that commonly resulted in wastegate rattle.   Requires corresponding front turbo, D310-0071 to function properly.  Core Program:   Turbochargers are a part of the CORE program we utilize at Dinan so you will be charged an additional fee on top of MSRP initially. This fee will then be refunded to you once your old turbochargers have been received at Dinan and passed a quality check. This ensures a continuous stream of product for rebuilding purposes and the lowest possible price to the consumer. Any cores sent back that are damaged and/or unusable will not be given credit for. Please ensure adequate packaging and packing is being used to protect returning cores.  Core Charge: $ 1200.00 Special Note: Requires corresponding front turbo, D310-0071 to function properly. Models supported by D310-0072 2009 BMW Z4 sDrive35is Convertible Product Specifications: Labor Hours/Installation Hours 15.50 Emission Status 50 State Emissions Legal -- This product has been granted an exemption by the California Air Resources Board and is in compliance with U.S. EPA Memorandum 1A, or is a replacement part. Included Notes A rear turbocharger that has been rebuilt and modified with a heavy duty wastegate pivot. Required Items Corresponding Front turbo (D310-0071) Refer to BMW recommended procedure for gaskets & hardware that must be replaced during turbocharger installation.

Special Note:   Installation labor time varies is 9.2 hours when handling kit is installed by itself. Installation labor time will be negligible if installed at the same time as the corresponding Dinan Spring Set. Product Description Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.   NOTICE:   Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits.  Models Supported by  Dinan Supplemental Ride Quality & Handling Kit for BMW F85 X5M F86 X6 M 2015-2018 X5 M F85  2015-2019  X6 M F86  Product Specifications Included Notes 2 front bump stops Required Items Highly Recommended:   D100-0930 - Performance Spring Set for BMW F85 X5 M F86 X6 M (see product description for details).

For any questions please PM or email: Online@AutoTalent.com Dinan High Performance Adjustable Coil-Over Suspension for BMW M5 2012-2016 Instructions for Part# D190-1011 The Dinan Adjustable Coil-Over Suspension system is engineered for drivers seeking peak performance and control from their vehicle. Developed through racing expertise and refined for everyday driving, this suspension setup enhances traction, stability, and handling across various driving conditions, inspiring confidence with its superior handling, reduced body roll, and minimized dive and squat during braking and acceleration. With threaded collars for customizable ride height, Dinan’s design retains the factory Electronic Damper Control (EDC) shocks while introducing adjustable springs and progressive bump stops. This allows for a sleek, lowered stance and increased suspension travel, delivering both aesthetic appeal and improved driving dynamics. For maximum safety, a tire clearance evaluation is advised when lowering beyond recommended levels. Features: Threaded collars provide easy, precise height adjustments for front and rear. Lowering adjustments : Up to 1-1/4" for the M5 (with a 3/4" recommended drop) and up to 1-1/8" for the M6 (with a 5/8" recommended drop). Stiffer springs (15% increase in both front and rear) for improved handling and reduced body roll. Suspension packers included for fine-tuning bump-stop clearance to optimize handling and comfort. Dinan-spec progressive bump stops to maintain ride quality at lowered heights. Durable components made from black-anodized 6061-T6 aluminum for a sleek look and corrosion resistance. Compatibility with BMW EDC shocks , preserving factory shock performance while enhancing suspension versatility. Note : Lowering may affect tire clearance. Please assess thoroughly to ensure safety; Dinan is not liable for damages or injuries if proper care is not taken during installation. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 9 Labor Time (Hours) 8.9 Length 33 Product Type HAS Kit Weight 47 Width 16 UPC 813725020631 Part Number D190-1011 Fitment Chart: Make Model Year BMW M5 2012-2016

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW M5 2006-2010   Instructions - d100-0913.pdf The Dinan Performance Spring Set for the E60 M5 is engineered to enhance both the handling and stance of your vehicle while maintaining ride comfort. This suspension upgrade provides improved control, reduced body roll, and increased grip, making it an ideal choice for performance enthusiasts looking for both aesthetics and functionality. Key Features: Lowered Ride Height : Front : Lowered by 7/8" . Rear : Lowered by 3/4" . This lowering optimizes the suspension geometry for improved handling and a more aggressive stance. Increased Spring Stiffness : A 10% increase in spring stiffness improves the car’s performance by reducing rear suspension compression during acceleration and front suspension compression (or dive) during braking. This results in better control and stability, particularly during spirited driving. Reduced Body Roll : The performance springs offer a substantial reduction in body roll , making the steering more responsive and improving cornering ability. This benefit will be felt at speeds as low as 20 mph, continuing up to top speed. Durable Construction : The springs are CNC wound using high-tensile chrome silicon wire and shot-peened for stress relief, ensuring durability and resistance to sag over the life of the vehicle. Improved Grip : These springs enhance grip during high-speed driving, helping to inspire confidence in the car’s capabilities on both the street and the track. Compatibility : The spring set is compatible with both conventional and factory electronic shocks , providing flexibility for various vehicle setups. Important Note: To achieve the full advertised performance benefits in terms of ride height and quality, Dinan strongly recommends pairing the Performance Spring Set with the corresponding Ride Quality and Handling Kit . If the handling kit is not installed, you may experience less than optimal results, including poor ride quality and improper handling. While Dinan provides a full warranty for product defects, claims related to improper handling or ride quality due to the absence of the matching kit will not be covered. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 10 Labor Time (Hours) 9.3 Length 14 Product Type Springs Weight 28 Width 14 UPC 813725020235 Part Number D100-0913   Fitment Chart: Make Model Year BMW M5 2006-2010

For any questions please PM or email: Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System for BMW 328i ( E36 ) 1996-1999 The Dinan Free Flow Exhaust System for BMW 3 Series models is engineered to enhance performance while maintaining a refined driving experience. This exhaust system addresses the need for increased power output without the obnoxious noise commonly associated with performance exhausts, ensuring a balanced and enjoyable sound profile. Key Features: Performance Gains: E36 328i: +6 HP @ 6500 RPM, +5 LB-FT @ 6500 RPM (with software) E36 325i: +11 HP @ 4500 RPM, +13 LB-FT @ 4500 RPM (with software) Tuned Resonance Chamber Technology: This innovative design balances maximum power gains with a civilized, sporty exhaust note, allowing for a more enjoyable driving experience without excessive noise. Lightweight Construction: The Dinan exhaust system significantly reduces weight, weighing only 17 lbs compared to the 28 lbs of the stock system, resulting in an 11 lbs weight reduction . Durable Materials: The exhaust features rigid muffler cases made from 20 gauge 304-stainless steel , providing excellent corrosion resistance and ensuring durability over time. Aesthetics: Dual 2.5-inch polished stainless steel exhaust tips offer a tasteful performance look, featuring laser-engraved Dinan branding for added style. Drone Abatement Technologies: The system is designed to reduce cabin resonance and drone, maintaining a comfortable interior ambiance, especially during low RPM driving. Factory-like Fitment: The exhaust utilizes factory brackets and hangers, ensuring an easy installation and perfect fit without modification. The Dinan Free Flow Exhaust System for the 3 Series not only improves performance but also enhances the overall driving experience, striking an ideal balance between aggressive sound and everyday civility. Whether on the street or the track, this exhaust system is tailored for enthusiasts who demand both power and sophistication from their BMWs. Brand Dinan Dinan Point Value 3 Emission Code 5 Height 10 Labor Time (Hours) 1 Length 64 Max HP Gain 6 - 11 (Depending on application) Max Torque (lb-ft) Gain 5 - 13 (Depending on application) Product Type Axle-Back Exhaust Weight 47 Width 19 UPC 813725021843 Part Number D660-0360 Fitment Chart: Make Model Year BMW 328i 1996-1998 BMW 328is 1996-1999

For any questions please PM or email: Online@AutoTalent.com Dinan Performance Spring Set for BMW 335i / 340i xDrive 2013-2018   Instructions - d100-0912.pdf Special Note:   For xDrive Models. The Dinan Performance Spring Set for the F30 335i and 340i (xDrive) offers a blend of improved handling and a more aggressive stance, while maintaining ride comfort. This system is engineered to enhance suspension performance, reduce body roll, and increase grip without sacrificing ride quality. Key Features: Lowered Ride Height : 335i xDrive : Lowered by 3/4" in the front and 3/4" in the rear . 340i xDrive : Lowered by 1" in the front and 1-1/8" in the rear . These lowered ride heights improve suspension geometry, giving the car a more aggressive stance and optimizing handling dynamics. Increased Spring Stiffness : A 30% increase in spring stiffness reduces suspension compression during acceleration (rear) and braking (front), providing a more controlled and stable ride. This leads to better vehicle handling and response. Reduced Body Roll : The springs help in significantly reducing body roll , enhancing cornering performance and steering response. Drivers will notice quicker steering response from low speeds up to the top speed of the vehicle. Durable Construction : Made from high-tensile chrome silicon wire , the springs are CNC wound and shot-peened to relieve stress, ensuring they last the lifetime of the vehicle without sagging. Improved Grip : The performance springs improve grip during high-speed driving, allowing for more confident handling, particularly in fast cornering or aggressive driving scenarios. Compatibility : These springs are compatible with both conventional and factory electronic shocks , making them a flexible upgrade for various setups. Important Note: To achieve optimal results in terms of ride height and ride quality, Dinan recommends pairing the Performance Spring Set with the corresponding Ride Quality and Handling Kit . Installing the spring set alone without the matching handling kit may lead to subpar ride quality and handling characteristics. While Dinan offers a full warranty on product defects, claims related to improper handling or ride quality due to not using the matching components will not be covered. Brand Dinan Dinan Point Value 2 Emission Code 5 Height 12 Labor Time (Hours) 8.1 Length 18 Product Type Springs Weight 25 Width 12 UPC 813725020228 Part Number D100-0912   Fitment Chart: Make Model Year BMW 335i xDrive 2013-2015 BMW 340i x Drive 2016-2018

For any questions please PM or email: Online@AutoTalent.com Dinan Tension Strut Ball Joint Kit for BMW M5 / M6 2012-2019 Instructions for Part# D280-0016 The Dinan Tension Strut Ball Joint Kit is designed to enhance driving precision by replacing the stock rubber bushings in the thrust arms with high-quality ball joints encased in machined aluminum housings. This upgrade significantly improves steering responsiveness by removing the flex found in traditional rubber bushings, delivering a more direct and controlled steering feel. Additionally, it reduces brake shimmy, providing smoother deceleration and a more composed braking experience. With nylon-lined bearings, this kit ensures quiet operation, making it ideal for daily driving. The bearings are sealed with rubber boots to guard against dirt and debris, helping to prevent premature wear and ensure long-lasting performance. Key Features: Enhanced Steering Precision : Replaces rubber bushings with ball joints, minimizing deflection and improving steering feedback. Brake Shimmy Reduction : Offers improved stability under braking by reducing unwanted movement. Quiet Nylon-Lined Bearings : Engineered for silent performance, making the kit practical for everyday use. Machined Aluminum Housings : Provides durability and precision fitment. Sealed Bearings with Rubber Boots : Keeps out dirt and grime, prolonging the lifespan of the components. Brand Dinan Dinan Point Value 1 Emission Code 6 Height 6 Labor Time (Hours) 2 Length 8 Product Type Monoballs Sale Category Suspension and Chassis Weight 5 Width 6 UPC 813725023557 Part Number D280-0016   Fitment Chart: Make Model Year BMW M5 2012-2016 BMW M6 2012-2019

For any questions please PM or email:  Online@AutoTalent.com Dinan Lightweight Tubular Anti-Roll Bar Set for BMW M2 / M3 / M4 2015- 2021 Dinan's Lightweight Tubular Adjustable Anti-Roll Bars are specifically engineered to enhance the performance and handling of your BMW, providing significant improvements in grip, stability, and driver confidence. Unlike the overly soft factory-installed anti-roll bars designed for comfort, Dinan’s bars are finely tuned for each chassis, effectively reducing body roll and optimizing mechanical grip for a more controlled and planted feel in every corner. Front Anti-Roll Bar Diameter: 32mm (compared to stock size of 24.7mm) Adjustability: Can be adjusted from 57% to 103% stiffer than the stock bar, allowing for tailored performance to meet your driving style Design: 4-hole configuration with 7 different mounting positions for extensive customization Supplied adjustable end links ensure a perfect fit and easy installation Rear Anti-Roll Bar Diameter: 24mm (compared to stock size of 22.9mm) Adjustability: Can be adjusted from 0% to 13% stiffer than the stock bar, enabling subtle tuning for improved handling dynamics Design: 3-hole configuration with 3 possible mounting positions using stock BMW end links Features: Tubular Construction: Both bars feature a hollow design, making them lighter without compromising strength Market Leader: Dinan's tubular anti-roll bars are unique in offering a wide range of adjustability Performance Benefits: Less Body Roll: Keeps your BMW more level during cornering, enhancing control More Mechanical Grip: Increases traction and handling capabilities, particularly during aggressive driving Greater Stability: Provides a more confident driving experience at the limit Upgrade your BMW's suspension with Dinan's Lightweight Tubular Adjustable Anti-Roll Bars for a performance enhancement that strikes the perfect balance between comfort and responsiveness. Brand Dinan Dinan Point Value 2 Emission Code 6 Height 4 Labor Time (Hours) 7 Length 44 Product Type Sway Bar Weight 30 Width 10 UPC 813725022710 Part Number D120-0605 Fitment Chart: MAKE MODEL YEAR BMW M2 2016-2021 BMW M3 2015-2018 BMW M4 2015-2020

For any questions please PM or email:  Online@AutoTalent.com Dinan Free Flow Axle-Back Exhaust System with Black Tips for BMW 335i / 335is / 335xi 2007-2013 Dinan's Free Flow Axle-Back Exhaust for the 335i Coupe and Convertible enhances performance by improving exhaust flow and reducing back pressure. This results in increased power output while delivering a refined sporty sound that remains civilized during regular driving but becomes more aggressive with harder acceleration. Constructed entirely from 100% stainless steel, the exhaust system is engineered for longevity and corrosion resistance. It also offers weight reduction over the stock system and features 3.5" polished stainless or ceramic black tips, providing a high-performance aesthetic. The system is designed for easy installation, utilizing factory hangers for a perfect fit. Key Features: Performance Gains: +6 HP and +5 lb-ft of torque @ 6600 RPM Drone Reduction: Technologies to minimize cabin resonance Enhanced Sound: Louder and sportier exhaust note Aesthetic Tips: Dual 3.5" laser-engraved, polished or ceramic black exhaust tips Weight Savings: Lighter than the stock exhaust system Durable Construction: 100% 304 stainless steel for corrosion resistance Easy Installation: Uses factory brackets and hangers for a seamless fit Brand Dinan Dinan Point Value 3 Emission Code 5 Height 12 Labor Time (Hours) 1.4 Length 36 Max HP Gain 6 @ 6600 RPM Max Torque (lb-ft) Gain 5 @ 6600 RPM Product Type Axle-Back Exhaust Tip Finish Black Ceramic Coated Weight 45.8 Width 24 UPC 813725021515 Part Number D660-0011-BLK   Fitment Chart: Make Model Year BMW 335i 2007-2013 BMW 335is 2011-2013 BMW 335i xDrive 2009-2013 BMW 335xi 2008